FIRMWARE:OpenWrt SNAPSHOT r8217-2cc821e / LuCI Master (git-18.276.41146-280dd33) MODEM:ARRIS SURFBoard SB8200 ROUTER:Linksys WRT32X USB NAS:Western Digital BLACK 1 TB Hardrive + Startech USB 3.0 External SATA III Enclosure
FIRMWARE:OpenWrt SNAPSHOT r8217-2cc821e / LuCI Master (git-18.276.41146-280dd33) MODEM:ARRIS SURFBoard SB8200 ROUTER:Linksys WRT32X USB NAS:Western Digital BLACK 1 TB Hardrive + Startech USB 3.0 External SATA III Enclosure
I webflash upgraded my Linksys WRT1900 ACS V2 to r36168. At first, I had problems because the 5 GHz channel wouldn't come up. That took several reboots, in fact I downgraded to r36154 during that adventure. However, I did return to r36168 and finally it appears to be working well. Speeds are good, 100+ Mbps down and 10+ Mbps which is what my ISP provides. Wireless speeds are 500+ Mbs on the 5 GHz channel as measured with iperf3. OpenVPN client works. Hopefully the build will be stable.
Joined: 05 Apr 2017 Posts: 981 Location: Louisiana, USA
Posted: Thu Jun 21, 2018 5:10 Post subject:
@slimbrick87 This happens from time to time on some builds with either WLAN, but mostly the 5GHz.
I've found that just making a change in the settings of the affected band (channel, width, etc...) will usually bring it back without having to reboot. _________________ DD-WRT Installation & Setup TUTORIAL http://www.dd-wrt.com/phpBB2/viewtopic.php?t=311117
FIRMWARE:OpenWrt SNAPSHOT r8217-2cc821e / LuCI Master (git-18.276.41146-280dd33) MODEM:ARRIS SURFBoard SB8200 ROUTER:Linksys WRT32X USB NAS:Western Digital BLACK 1 TB Hardrive + Startech USB 3.0 External SATA III Enclosure
FIRMWARE:OpenWrt SNAPSHOT r8217-2cc821e / LuCI Master (git-18.276.41146-280dd33) MODEM:ARRIS SURFBoard SB8200 ROUTER:Linksys WRT32X USB NAS:Western Digital BLACK 1 TB Hardrive + Startech USB 3.0 External SATA III Enclosure
The last few builds my wireless devices haven't been able to see each other, thus no printing from wireless devices to my wireless printer. Any fix?
WRT3200ACM
Do you have AP Isolation disabled in Wireless Settings?
It is currently disabled. I've also reset to factory defaults. I am running OpenVPN. My wired connections can ping every device but my wireless connections can only ping wired devices.
Joined: 05 Apr 2017 Posts: 981 Location: Louisiana, USA
Posted: Thu Jun 21, 2018 6:30 Post subject:
shmackitup wrote:
spuriousoffspring wrote:
shmackitup wrote:
The last few builds my wireless devices haven't been able to see each other, thus no printing from wireless devices to my wireless printer. Any fix?
WRT3200ACM
Do you have AP Isolation disabled in Wireless Settings?
It is currently disabled. I've also reset to factory defaults. I am running OpenVPN. My wired connections can ping every device but my wireless connections can only ping wired devices.
FIRMWARE:OpenWrt SNAPSHOT r8217-2cc821e / LuCI Master (git-18.276.41146-280dd33) MODEM:ARRIS SURFBoard SB8200 ROUTER:Linksys WRT32X USB NAS:Western Digital BLACK 1 TB Hardrive + Startech USB 3.0 External SATA III Enclosure
I had some issues when I try to upgrade from DDWRT to DDWRT. I wanted to go back stock. Than I realized my two partitions has DDWRT (No Stock). I ran my router on partition two and I flashed with latest stock. After this step I flashed to factory-to-ddwrt.bin.
Now my 1st partition has stock
Second partition has latest DDWRT
I didn't make my all settings but it seems TELNET is not enabled default. I mean it is enabled on GUI but I cannot connect via telnet. If I disable and re-enable TELNET is OK. Someone confirm that please. I will tell my reviews after my all settings done.
Edit: After first reboot TELNET is working without switch disable/enable TELNET. It is ok (DEFAULT). From stock to DDWRT TELNET didn't hook up but after first reboot it is OK. _________________ Kaan's World | @mkaand | PLEX Archive | Trakt.tv
Joined: 14 Dec 2015 Posts: 774 Location: 127.0.0.1
Posted: Thu Jun 21, 2018 9:54 Post subject:
WRT1200v1 - factory-to-ddwrt would not load, firmware error from stock said "Fail - JCGI return: error - Request Entity Too Large". Tried from two different stock firmwares, webflash loaded fine.
WRT1900v1 - factory-to-ddwrt flashed fine, wireless speeds are good for now, we shall see over time.
Couldn't use my nvram backup (made it fail over to the stock firmware), probably too many changes since my older build, so reset them up.
3200 - flashed fine and was able to use nvram backup.
So, everything is working on all of them so far for what I am using. _________________ Tutorial for flashing WRT series WRT Installation,Upgrade & Basic Setup–Cliff Notes
r52242: WRT3200ACM, WRT1200ACv1 & 1 Velop in bridge mode(IoT subnet), r52242 WRT1900ACv1 AP
Velop:2 WHW0101, RE6500, RE9000(AP)
Spectrum - 1000/50
SysLog Watcher 5, New security Onion box coming soon, Fingboxes, PiHoles, NEMS, Cacti, rpisurv
)
