Posted: Wed Jun 20, 2018 14:11 Post subject: WDR3600 v1 - 36104/36154 - Partial Disconnect after 1 hour
Hi all,
I have recently upgrade my WDR3600v1 to 36104, then 36154 (same issue for both 36104 and 36154). This WDR3600v1 is a Client Bridge acting as a wireless repeater and connect to Netgear R6300V2 r35550M kongac for internet access.
Everything work fine after restart the WDR3600 or click "Apply Settings" under Wireless Basic Setting. But after around an hour, wireless and wired client will unable to get their IP address from DHCP server (pfsense VM which host connected to R6300V2 through wire). WDR3600v1 is unable to ping R6300V2 or external IP address.
However both wired / wireless client can access Internet by setting static IP.
Anyone can help on this? or is there a command which is equal to "Apply Settings" I can put it as cron job as workaround?
Note: The router was not able to boot up after flash to 36104 and reset using 30-30-30 approach which I lost all previous settings