Posted: Sun Jun 10, 2018 20:55 Post subject: Latest, Stable dd-wrt for WRT54G V.2
So I moved into a new home that has a very distant guest room. I was able to line a cable to it and undusted an old but trusty WRT54G V2. It is currently running: DD-WRT v24-sp2 (08/12/10) mini, and though browsing I was able to get to later builds and many Beta, I was hoping someone could show me the latest stable.
Posted: Mon Jun 11, 2018 13:34 Post subject: Re: Latest, Stable dd-wrt for WRT54G V.2
pauldays wrote:
So I moved into a new home that has a very distant guest room. I was able to line a cable to it and undusted an old but trusty WRT54G V2. It is currently running: DD-WRT v24-sp2 (08/12/10) mini, [...] I was hoping someone could show me the latest stable.
Just test every build since then, and pick the best one.
I (and several others, if you look thru the last few thread pages) am using 36079 on my old WRT54*'s. I'll probably try 36104 on them this week though. Your Gv2 is corerev 7, so you're good to go. Recommended to reset after flashing, and manually set up.
I'd also recommended running at 250 MHz, but you should be aware that all old WRT's I've working on needed their voltage i/o capacitors replaced; and none had any visible failure signs (I test w/ an ESR meter). So unless you can (test and...) replace them, prob best to not overclock, if you don't need. Unless of course you want to increase the chance of breaking it, and upgrade. Or if you need caps, I have some to sell cheap. _________________ #NAT/SFE/CTF: limited speed w/ DD#Repeater issues#DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo#
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
I been running 'dd-wrt.v24_mini_generic.bin' r33986 on a WRT54GSv2 for months as switch for other devices + WDS link to WAP54G running 'dd-wrt.v24_micro_generic.bin'.
Tiant caused any problems.
I like 12548 _________________ SIG:
I'm trying to teach you to fish, not give you a fish. If you just want a fish, wait for a fisherman who hands them out. I'm more of a fishing instructor.
LOM: "If you show that you have not bothered to read the forum announcements or to follow the advices in them then the level of help available for you will drop substantially, also known as Murrkf's law.."
Posted: Mon Jun 11, 2018 18:43 Post subject: Re: Latest, Stable dd-wrt for WRT54G V.2
jwh7 wrote:
pauldays wrote:
So I moved into a new home that has a very distant guest room. I was able to line a cable to it and undusted an old but trusty WRT54G V2. It is currently running: DD-WRT v24-sp2 (08/12/10) mini, [...] I was hoping someone could show me the latest stable.
Just test every build since then, and pick the best one.
I (and several others, if you look thru the last few thread pages) am using 36079 on my old WRT54*'s. I'll probably try 36104 on them this week though. Your Gv2 is corerev 7, so you're good to go. Recommended to reset after flashing, and manually set up.
I'd also recommended running at 250 MHz, but you should be aware that all old WRT's I've working on needed their voltage i/o capacitors replaced; and none had any visible failure signs (I test w/ an ESR meter). So unless you can (test and...) replace them, prob best to not overclock, if you don't need. Unless of course you want to increase the chance of breaking it, and upgrade. Or if you need caps, I have some to sell cheap.
Outstanding! Thanks! I took the latest Beta to start and it's running much much better, with whatever 2010 build it had it ran a speedtest of 10 - 11 Mbits, now its a solid 19 - 20 where it should be. Also I see there are TCP alogorithms, I'm a fan of westwood. Thanks a bundle! Any other tips before I leave this installed? For max. performance/settings. Since there will be only perhaps one or two users at sporadic times, i dunno about overclocking, but you know, since it will get light use, why the heck not.
I been running 'dd-wrt.v24_mini_generic.bin' r33986 on a WRT54GSv2 for months as switch for other devices + WDS link to WAP54G running 'dd-wrt.v24_micro_generic.bin'.
Tiant caused any problems.
Haven't done any newer builds on the WRT54G boxes but they prolly work ok if jwh7 is using.
Thanks "j" I followed the links and go to where the beta builds were. It's running solid. Like I mentioned in my previous post. It's all set, if there are any other settings/tweaks let me know before I leave it tucked away. It's just mostly for smartphone/tablets/ perhaps notebook use.
Posted: Mon Jun 11, 2018 19:01 Post subject: Re: Wondering
pauldays wrote:
Just wondering, though I'm not using it, can I flash this on a WAP54G?
Yes, but only micro builds, and the v1.x is corerev 4, so (as the lore goes) it must use an -old- VINT build. Though, I recall an SVN a year to two ago where BS stated it allowed wrt54g v1 to work. I asked in the forum long ago; no reply.
Posted: Thu Aug 23, 2018 21:08 Post subject: Re: Latest, Stable dd-wrt for WRT54G V.2
jwh7 wrote:
I (and several others, if you look thru the last few thread pages) am using 36079 on my old WRT54*'s. I'll probably try 36104 on them this week though. Your Gv2 is corerev 7, so you're good to go. Recommended to reset after flashing, and manually set up.
Thanks to input from this thread, I've now loaded up 36079 mini on a WRT54Gv2, and it significantly improved overall wireless throughput, on the order of 40-50%. The "westwood" TCP algorithm seems to offer slightly better performance than "vegas," but I haven't done any extensive testing. I plan to use this particular WRT as a Client Bridge, so the improved throughput will be most appreciated.