FIRMWARE:OpenWrt SNAPSHOT r8217-2cc821e / LuCI Master (git-18.276.41146-280dd33) MODEM:ARRIS SURFBoard SB8200 ROUTER:Linksys WRT32X USB NAS:Western Digital BLACK 1 TB Hardrive + Startech USB 3.0 External SATA III Enclosure
Welp. Installed it using install and reset settings.
Froze kinda half way... had to restart when i did it seemed installed hmm. Everything worked... except printer.
Swapped back to the old partition with the working build from 5/7/18 printer works.
Thought it was due to the bad install.
Reinstalled this build again. This time no issues. At least with the install.
However, AirPrint status printer showed up originally but then the printer didn’t show up later on. Soon as i rebooted back into 5/7/18 airprinter was visibile again.
Printer i am using is an epson worforce 3640..
Going to sit this one out ladies and gents. Until mu-mimo is added. _________________ WRT3200ACM V1 r39267 std (03/22/19) OpenVPN client
Installed r36079-2018.06.01 on my WRT1900ACS_v1 as flash upgrade without issues. I'll report anything I find that is causing problems. I have recently tweaked my wireless configs a bit (5GHz VHT80). I have a good mix of connections from wireless after upgrade (screen cap attached).
DD-WRT config reference for my WRT1900ACS_v1: wired devices ~75, wireless ~20 clients using 5GHz-80Mhz-AC-Only & 2.4GHz-20Mhz-NG-Mixed with 2 additional APs in house (D-Link DAP-1650 - same SSID/Config, non-overlapping channels), IPv6 on, DHCP reservations for all known devices, local Raspberry Pi NTP, access rules (internet block security cameras), port forwards, no QOS, running OpenVPN server, firewall rules (OpenVPN & Guest), Guest 2.4GHz Wi-Fi segmented network/DHCP
_________________
Router: Linksys WRT1900ACS_v1
Firmware: DD-WRT v3.0-r36079 std 06/01/18
Cable Modem: Motorola MB7420
ISP: Comcast (250 Mbps down | 10 Mbps up)
Speedtest (A+ bufferbloat & overall): http://www.dslreports.com/speedtest/34126994
Last edited by derWolfMan on Sat Jun 02, 2018 6:00; edited 1 time in total
Just out of curiosity, what is the Kernel version? Thanks in advance.
Code:
root@DD-WRT:~# uname -a
Linux DD-WRT 4.9.104 #151 SMP PREEMPT Thu May 31 03:17:50 CEST 2018 armv7l DD-WRT
I installed r36079 on my WRT1900ACS V2 as a webflash upgrade and it appears stable and robust. ~30 devices, mostly wireless. OpenVPN client. 500+ Mbps wireless speeds measured with iperf3. My cable connection is 100 Mbs down and 10 Mbps up and I achieve those speeds reliably. I have a guest network that runs with no problem. _________________ FIRMWARE: 6-20-2018 - r36168
MODEM: ARRIS SURFBoard SB6183
ROUTER: Linksys WRT1900ACS V2
ISP: TWC Spectrum 100 Mbps Download | 10 Mbps Upload
SERVICES: IVPN OpenVPN Client
Welp. Installed it using install and reset settings.
Froze kinda half way... had to restart when i did it seemed installed hmm. Everything worked... except printer.
Swapped back to the old partition with the working build from 5/7/18 printer works.
Thought it was due to the bad install.
Reinstalled this build again. This time no issues. At least with the install.
However, AirPrint status printer showed up originally but then the printer didn’t show up later on. Soon as i rebooted back into 5/7/18 airprinter was visibile again.
Printer i am using is an epson worforce 3640..
Going to sit this one out ladies and gents. Until mu-mimo is added.
Looks like a known problem with bonjour https://svn.dd-wrt.com/ticket/6319#comment:4 _________________ WRT3200ACM - Firmware: DD-WRT v3.0-r35681 std (04/06/18).
WRT160N - Repeater - Firmware: DD-WRT v24-sp2 (02/02/15) mini.
Well I bought an ASUS RS-AC5300 today to replace my Linksys WRT1900AC_V1. I will flash straight to this version. Fingers crossed that ASUS RS-AC5300 will be a stable DD-WRT box.
As WRT32X has replaced WRT3200ACM at retail level, I'm not going to chance a crippled Marvel box. Over Linksys for now.
Seems that there will be a new generation of routers hitting the market soon....and many of the beast boxes are now starting to be discontinued. Bargains to be had!
Well I bought an ASUS RS-AC5300 today to replace my Linksys WRT1900AC_V1. I will flash straight to this version. Fingers crossed that ASUS RS-AC5300 will be a stable DD-WRT box.
You may be better served by flashing the ASUS AC5300 with Merlin Firmware. I struggled with dd-wrt on a issue prone WRT3200 for quite some time. I purchased an ASUS AC86U and flashed it with Merlins Firmware. I have not had one issue with the ASUS since it was purchased in January.
Thank you very much! It looks like a very cool project. Seems to have many of the features I’m looking plus some other great stuff. Hope it can replace the DD-wrt config I have become accustomed.
rjih wrote:
MyPal wrote:
Well I bought an ASUS RS-AC5300 today to replace my Linksys WRT1900AC_V1. I will flash straight to this version. Fingers crossed that ASUS RS-AC5300 will be a stable DD-WRT box.
You may be better served by flashing the ASUS AC5300 with Merlin Firmware. I struggled with dd-wrt on a issue prone WRT3200 for quite some time. I purchased an ASUS AC86U and flashed it with Merlins Firmware. I have not had one issue with the ASUS since it was purchased in January.
Posted: Sat Jun 02, 2018 21:09 Post subject: Success WRT1200ACv2
Upgraded from r28788 using yesterday's ddwrt-linksys-wrt1200acv2-webflash.bin in the sticky link. I'm not sure if I really have a V1 or V2, but it seems to be working as a wifi AP, which is all I need. Thanks to all involved on the project!
Thank you very much! It looks like a very cool project. Seems to have many of the features I’m looking plus some other great stuff. Hope it can replace the DD-wrt config I have become accustomed.
rjih wrote:
MyPal wrote:
Well I bought an ASUS RS-AC5300 today to replace my Linksys WRT1900AC_V1. I will flash straight to this version. Fingers crossed that ASUS RS-AC5300 will be a stable DD-WRT box.
You may be better served by flashing the ASUS AC5300 with Merlin Firmware. I struggled with dd-wrt on a issue prone WRT3200 for quite some time. I purchased an ASUS AC86U and flashed it with Merlins Firmware. I have not had one issue with the ASUS since it was purchased in January.
trust me, once you try RMerlin, you will love it. _________________ My "WRT" rant, and why I have gone ddwrt on x86, no more consumer routers. ( ac86u as access points & bridges )
Posted: Sun Jun 03, 2018 5:51 Post subject: Tested Linksys WRT1200ac V1
Working on my Linksys WRT1200ac V1 Have no issues, running stable and nice, up time about 5 hrs, tested 5ghz ac and 2.4ghz wireless all is very nice. Flashed from factory firmware.