Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Fri Jun 01, 2018 20:29 Post subject:
Mile-Lile wrote:
@tatsuya46
check #3616, I thing Seb fixed it in r36011...
sometimes it works, sometimes it doesnt, still not fixed. well he even marked it as "worksforme" long ago so probably never be properly fixed _________________ LATEST FIRMWARE(S)
BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
Joined: 16 Nov 2015 Posts: 6407 Location: UK, London, just across the river..
Posted: Fri Jun 01, 2018 21:21 Post subject:
Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r36079 std (06/01/1
Kernel Version Linux 3.18.111 #15680 Fri Jun 1 04:15:48 CEST 2018 mips
update: via GUI
reset: NO
status: Operational
errors: Nothing new
Jun 1 20:31:42 TPLINK-WR1043NDv2 daemon.info httpd[2900]: Authentication fail
Jun 1 20:31:42 TPLINK-WR1043NDv2 daemon.err httpd[2900]: Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
it seems syslog is reporting not many events like before... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55460 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55460 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Fri Jun 01, 2018 21:25 Post subject:
Alozaros wrote:
Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r36079 std (06/01/1
Kernel Version Linux 3.18.111 #15680 Fri Jun 1 04:15:48 CEST 2018 mips
update: via GUI
reset: NO
status: Operational
errors: Nothing new
Jun 1 20:31:42 TPLINK-WR1043NDv2 daemon.info httpd[2900]: Authentication fail
Jun 1 20:31:42 TPLINK-WR1043NDv2 daemon.err httpd[2900]: Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
it seems syslog is reporting not many events like before...
see ticket 6275, dir-862L syslog is basically useless now. wish we would get options added to let user pick such things instead of randomly forcing dumb changes upon everyone.. _________________ LATEST FIRMWARE(S)
BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
Kernel Version: Linux 3.18.111 #15674 Fri Jun 1 04:08:16 CEST 2018 mips
Status:OK; Reset:No; Errors:None so Far !
Tests:
-> Wifi Speeds: OK
-> Network Speeds: Ok
-> NTP: OK
-> Configurations ( VAp \ QOS \ DNsMasq ): Ok
Weird Stuff:
-> Syslog not showing accurate time;
I now have more time on my hands. I'm going to start testing more extenssivly the builds, if something comes up I will keep you guys updated.
Observation: Love the firmware, and all the comunity surrounding it. Very interested in helping in any way that I could. A big thanks for all of your work ! _________________ Today, is allways a Good day!
________________________________
Atheros: tp-link wr940N - Gateway \ DNSMasq \ AP
Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r36079 std (06/01/1
Kernel Version Linux 3.18.111 #15680 Fri Jun 1 04:15:48 CEST 2018 mips
update: via GUI
reset: NO
status: Operational
errors: Nothing new
Jun 1 20:31:42 TPLINK-WR1043NDv2 daemon.info httpd[2900]: Authentication fail
Jun 1 20:31:42 TPLINK-WR1043NDv2 daemon.err httpd[2900]: Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
it seems syslog is reporting not many events like before...
see ticket 6275, dir-862L syslog is basically useless now. wish we would get options added to let user pick such things instead of randomly forcing dumb changes upon everyone..
I fully agree!
If there is anyway that I can help just say it. With a few resources and a bit of studying i bet i can better understand this firmware and help improve it. _________________ Today, is allways a Good day!
________________________________
Atheros: tp-link wr940N - Gateway \ DNSMasq \ AP
Router Model Buffalo WZR-HP-AG300H
Firmware Version DD-WRT v3.0-r36079 std (06/01/18 )
Kernel Version Linux 3.10.108-d2 #57208 Fri Jun 1
status: all good
no reset
previous 36006
errors: nothing new, syslog time still GMT remains annoying.
Posted: Sat Jun 02, 2018 2:29 Post subject: DNSSEC options kill DNSMASQ
I have been using DNSSEC once, but in the last versions of DD_WRT including r36079 it seems broken.
Including any of theses options for DNSMASQ will result in a non starting DNSMASQ without any error message at all on Syslog, also killing DHCP obviously.
Posted: Sat Jun 02, 2018 6:54 Post subject: Re: New Build - 06/01/2018 - r36079
Router Model: TP-Link TL-WR841ND v10 ("v11.1" EU variant, it has parts from v10 and v9, SOC is from v10)
Status: See Errors
Reset: Yes
Errors:
Every 20 minutes:
Code:
192.168.11.1 Jun 2 06:44:19 user info dnsmasq : dnsmasq daemon successfully stopped
192.168.11.1 Jun 2 06:44:19 user info dnsmasq : dnsmasq daemon successfully started
192.168.11.1 Jun 2 06:44:19 user info vpn modules : vpn modules successfully unloaded
192.168.11.1 Jun 2 06:44:19 user info vpn modules : nf_conntrack_proto_gre successfully loaded
192.168.11.1 Jun 2 06:44:19 user info vpn modules : nf_nat_proto_gre successfully loaded
192.168.11.1 Jun 2 06:44:19 user info vpn modules : nf_conntrack_pptp successfully loaded
192.168.11.1 Jun 2 06:44:19 user info vpn modules : nf_nat_pptp successfully loaded
192.168.11.1 Jun 2 06:44:20 user info process_monitor : Process Monitor successfully stopped
192.168.11.1 Jun 2 06:44:20 user info inadyn : dynamic dns daemon successfully stopped
192.168.11.1 Jun 2 06:44:20 user info process_monitor successfully started
192.168.11.1 Jun 2 06:44:20 user info DDNS : inadyn daemon successfully started
192.168.11.1 Jun 2 06:44:20 user info wland : WLAN daemon successfully stopped
192.168.11.1 Jun 2 06:44:20 daemon debug ntpclient[3480] Connecting to europe.pool.ntp.org [87.120.166.8] ...
192.168.11.1 Jun 2 06:44:20 user info wland : WLAN daemon successfully started
192.168.11.1 Jun 2 06:44:20 user info WAN is up. IP: xxx.xxx.xxx.xxx
192.168.11.1 Jun 2 06:44:20 daemon info ntpclient[3480] Time set from europe.pool.ntp.org [87.120.166.8].
192.168.11.1 Jun 2 06:44:20 daemon info process_monitor[3478] cyclic NTP Update success (servers europe.pool.ntp.org)
192.168.11.1 Jun 2 06:44:20 daemon debug process_monitor[3478] We need to re-update after 3600 seconds
192.168.11.1 Jun 2 06:44:20 daemon info process_monitor[3478] set timer: 3600 seconds, callback: ntp_main()
Router Model: D-Link DIR-300 A1
Firmware Version: DD-WRT v3.0-r36079 std ( 06/01/1 )
previous Version: DD-WRT v3.0-r33525 ( 17/10/2017 )
Update: via GUI
Reset: First no reset, then reset per WebGUI at last 30/30/30 hard reset
Status: No encryption on wireless interface! Error: No matter what you setup in the WebGUI. Your settings will show up in the status page of the WebGUI but the wireless interface is not encrypted.
Could someone please report this error via bug tracker? The old Capcha-System is down and so sadly I can't register an account and report that bug myself.