[derWolfMan]

Noticed new build released, decided to go for it myself:
ftp://ftp.dd-wrt.com/betas/2018/05-13-2018-r35927/

***

Installed r35927-2018.05.13 on my WRT1900ACS_v1 as flash upgrade without issues. I'll update/report if I do find anything not working as expected.

Kernel Version: Linux 4.9.99 #142 SMP PREEMPT Wed May 9 12:15:51 CEST 2018 armv7l

DD-WRT config reference for my WRT1900ACS_v1 (not vanilla, not overly complex): mostly wired devices ~75, wireless using 5GHz-AC Only & 2.4GHz-Mixed both @ 20MHz width non-overlapping channels (also have 2 APs in house) w/ ~20 clients, IPv6 on, DHCP reservations for all known devices, access rules (internet block security cameras), port forwards, no QOS, running OpenVPN server, firewall rules (OpenVPN & Guest), Guest 2.4GHz wifi segmented network/dhcp
_________________
Router: Linksys WRT1900ACS_v1
Firmware: DD-WRT v3.0-r35927 std 05/13/18
Cable Modem: Motorola MB7420
ISP: Comcast (250 megabit/s down | 10 megabit/s up)
Speed Test Installed Build: http://www.dslreports.com/speedtest/33334877 (A+)

[CaperJoe]

Loaded it in with no problems yet. Lately all of the builds working great. DDNS, 21 STATIC LEASES, OPEN VPN, SCRIPTING TO DIRECT DNS REQUESTS, TIME BASED ACCESS RESTRICTIONS BASED ON MAC ADDRESS. As always thanks to those that put in the work to make this software more amazing each day.

[DaveI]

Same as yesterday.

1. Attached NTFS NAS Drive no longer functioning.
(File system unreadable).

2. miniDLNA remains broken.

Flashed back to 34311 and restored broken features.

[BobbyLee]

Working fine on my WRT3200ACM configured with OpenVPN server. Now if they could just get the miniDLNA working I'd be happy. Nice to see the free memory back up to 25% versus the 18% in r35898.

[05dyna]

I took my wrt3200 out of retirement for a day to see if this build fixed ssh with authorized key, it is still broken

[aventus]

Don’t work with Linksys wrt 1200ac

Router doesn’t start only power led blinks

[slimbrick87]

I've been using r35927 on my Linksys WRT1900ACS v2 for a couple of hours and it's worked well. I have ~35 devices, mostly wireless and some wired. Roughly 10 are static leases. I run an OpenVPN client. My cable connection is 100 Mbs down and 10 Mbps up and I'm getting that performance or better when measured with Ookla Speedtest or measured by my wireless Xbox. Wireless speeds measured between a desktop wired to the router and a wireless laptop using iperf3 are ~500 Mbs.

Hopefully it is stable without reboots but I'll give it more time before I judge that aspect.

[audioquest]

5.0 Wireless network is not working

AP
Mixed
VHT80 (80 Mhz)
132 - 5660 Mhz
LL (-6)

[dance85]

[Malachi]

[dance85]

[Malachi]

Not that I know of.

[shmackitup]

I'm having severe 2.4GHz connection issues on WRT3200ACM. I've reflashed and cleared defaults multiple times now. Once in a while devices will connect but then get dropped very quickly.

Edit: Fixed it by changing Security Settings. It doesn't like TKIP+AES - Has to be AES only

[audioquest]

CHanged to Wide HT40 channel 36

[myersw]