[abc_warbot]

Does the litestation 2,5 fall into this category, if so where can i download the images..?


Regards

[BrainSlayer]

yes it does. you can download the image/files from the release candidate section

http://www.dd-wrt.com/dd-wrtv2/down.php?path=downloads%2Frelease+candidates/

[abc_warbot]

Does it have all the features, AP - Station - Wireless Bridge.

[BrainSlayer]

yes

if you want superchannel capabilities (2.3 - 2.7 ghz), you need to contact me. the rest is already included

[abc_warbot]

I supposed the method for installing is use the management web page and browse for
the image file and upload it. Is there any other procedure for the firmware upload..?


Regards

[l.santiago]

We have WISP on San Juan P.R. we are using dd/wrt on our Router CPE. Thanks BrainSlayer for your work. The firmware on the download section for litestation2 is the same for litestation5

[iz3had]

Hy l.santiago, can you provide us more information please?
Such as:
- you upgraded your ls2, but how? Through the original Ubiquiti's web config? If yes, which version of Ubiquiti's firmware did you have before the upgrade to dd-wrt?
- is it possible to select all channel spacing (5,10,20,40MHz)?
- which is the soft lack (if exist) of dd-wrt on ls2 compared to a standard, e.g., Linksys installation?
- is it possible to utilize all the ls2's tx power?
- is it stable?

Thanks, Mirco

[l.santiago]

We need to ask all your question to brainslayer

[iz3had]

But....don't you have it already installed?

[sar]

I ask too?

Do you load the DD-WRT ls2 firmware bin file through the original Ubiquiti's web config?

Will that work properly?

Thank you ......

[iz3had]

I htink an officially answer from BS is necessary....

[mksb]

how to load in new LS2 which does not have a serial interface ?? any suggestions???

[sar]

Bump

Hoping for a BrainSlayer response.

Thank you

[mksb]

Sebastian told me that we could telnet redboot from port no. 9000 and upload it but we have 2.5 seconds to do this and I have no idea about the IP address of redboot on LS2, could any one find out or tell what it is, may be we could write a new procedure for LS2 and post it on wiki so that in future no one has problems .

cheers
Mankomal Singh

[abc_warbot]

Hey man if you check the name of the candidate, you will realize which the LS we're talking
to.

http://www.dd-wrt.com/dd-wrtv2/downloads/release candidates/DD-WRT v24 RC3/Ubiquiti Litestation 2

And i believe this will be upgraded using ubiquiti web page firmware update.

Saludos amigo desde Colombia.