Joined: 24 Feb 2013 Posts: 1634 Location: Belgrade
Posted: Sat May 12, 2018 10:27 Post subject:
Router Model GL.iNet-AR150
Firmware Version DD-WRT v3.0-r35916 std (05/11/1 8 )
Kernel Version Linux 3.18.108 #14141 Fri May 11 10:57:35 CEST 2018 mips
Tests: -> Wifi Speeds: OK
-> NTP: OK
-> Configurations ( VAp \ QOS \ DNsMasq ): Ok
Observation: Love the firmware, and all the comunity surrounding it. Very interested in helping in any way that I could. A big thanks for all of your work ! _________________ Today, is allways a Good day!
________________________________
Atheros: tp-link wr940N - Gateway \ DNSMasq \ AP
Router Model: TP-Link WR1043ND V3
Kernel: 3.18.108 #14103 Fri May 11 09:44:45 CEST 2018 mips
Status: works so far
Reset: no
Errors:
-I can't seem to delete traffic data from web UI. I get the "WARNING! This will delete all traffic data. Proceed?" dialog box, but clicking OK doesn't do anything then. I noticed the same behavior in r35898.
-In system log, the wifi devices' connects and disconnects are no longer reported. It's been like that for a while, not sure whether by design or not.
Joined: 24 Jan 2016 Posts: 130 Location: Midwest, US
Posted: Sun May 13, 2018 3:04 Post subject:
Router: Buffalo WZR-600DHP
Firmware: 35916 std (05/11/18 )
Kernel: 3.10.108
Status:OK Reset: No
Errors: None
Webui upgrade from 35898
Uptime: 20 min
It seems there are no recent updates or code changes as far as this old ath9k router, or the end-of-life kernel 3.10.108
It works well though, solid performance and speed/bufferbloat tests. _________________ Buffalo WZR‑600DHP (WZR-HP-AG300H)
Joined: 03 Nov 2015 Posts: 316 Location: Florida, USA
Posted: Sun May 13, 2018 15:06 Post subject:
Router: TP Link Archer C7 Ver.2 (US) WDS AP
Firmware: v3.0-r35916 std (05/11/18 )
Kernel: Linux 3.18.108 #14109 Fri May 11 09:53:24 CEST 2018 mips
Reset: NO
Errors: None
Router: TP Link TL-WR841ND Ver.9 WDS Stations (x2)
Firmware: v3.0-r35916 std (05/11/18 )
Kernel: Linux 3.18.108 #14093 Fri May 11 09:35:26 CEST 2018 mips
Reset: NO
Errors: NONE
Router: D-Link DIR-859 A3
Firmware: DD-WRT v3.0-r35916 std (05/11/18)
Linux 3.18.108 #14115 Fri May 11 10:02:36 CEST 2018 mips
Status: Good
Reset: No
Upgraded from 35898 via web interface
- 2.4Ghz and 5Ghz radios enabled
- QOS enabled
- Port forwarding enabled
- ath0.1 guest interface enabled
Anyone know why I cannot upgrade or downgrade my Linksys WRT160NL from this firmware?
Soon as I press upgrade it tells me upgrade successful and reboots the router back into this firmware _________________ TPLINK TL-WR2543ND (5GHz)
WRT160NL (2.4GHz)
Router: D-Link DIR-300 A1
Firmware: DD-WRT v3.0-r35916 std (05/11/1
Status: WLAN encryption does not work, no matter what you setup in the WebGUI
Reset: YES