Router Model TP-Link TL-WR841ND v9
Firmware Version DD-WRT v3.0-r35898 std (05/07/18 )
Kernel Version Linux 3.18.108 #13973 Mon May 7 04:39:46 CEST 2018 mips
Status: OK
Reset: No
Errors: None so far, however, since a few builds, Wireless settings don't stick, requiring several clicks on the Apply Settings button. It's a random occurrence, it may or may not apply immediately.
Joined: 24 Feb 2013 Posts: 1634 Location: Belgrade
Posted: Fri May 11, 2018 9:11 Post subject:
pepe10000 wrote:
I wonder if it would be possible for some kind person to inform BrainSlayer about the problem of flashing via the Web of these two routers to solve it in future versions.
A greeting.
Router: DIR-615e3
Firmware: dir615e3-firmware.bin (v3.0-r35898 std)
Kernel: Linux 3.10.108-dd #55440 Mon May 7 03:58:57 CEST 2018 mips
Status: Buggy on gui
Reset: No
Notes on configuration:
DNSMasq
Virtual wireless with bridging x2
multiple DHCP server
QOS
Errors:
1. Apply settings on multiple pages does not work (for example Setup->Basic Setup, Setup->Network and Security->Firewall)
2. Firmware upgrade button does not work (I have had to use command line to upgrade/downgrade)
3. Factory Defaults (reset) does not work (apparently broken after 33006)
4. Firmware restore button broken (apparently broken after 33006)
5. Switch ports can not communicate with each other (see post https://www.dd-wrt.com/phpBB2/viewtopic.php?t=312371 ) [have not tested due to wanting isolation]
6. user.info : Authentication fail after each http login
daemon.err httpd[1396]: Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
Router: DIR-825 rev B1
Firmware: dir825-firmware.bin (v3.0-r35898 std)
Kernel: Linux 3.10.108-dd #55422 Mon May 7 03:26:40 CEST 2018 mips
Status: Working
Reset: No
Notes on configuration:
Media Network
DNSMasq
Port Forwarding
DHCP reservation
Errors:
1. user.info : Authentication fail after each http login
daemon.err httpd[1396]: Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
Router: D-Link DIR-300 A1
Firmware: DD-WRT v3.0-r35898 std (05/07/1
Status: No WLAN encryption does not work, no matter what you setup in the WebGUI
Reset: YES
I'm only been using this as a wired AP, so I'm not using very many advanced features. But it's seems fine. uptime over four days.
I just noticed the sys log shows this error when I log into the status page, which requires the admin password
Code:
Jun 6 04:46:40 dir 859 daemon.err httpd[1218]: Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
Jun 6 04:46:46 dir 859 daemon.err httpd[1218]: Request Error Code 404: File not found.