locking CPU to Max does make a difference with the newer openssl on the EA8500
Code:
### r33345 ### CPU default scaling freq
OpenSSL 1.1.0f
aes-128-cbc
Doing aes-128 cbc for 3s on 16 size blocks: 7590952 aes-128 cbc's in 2.99s
Doing aes-128 cbc for 3s on 64 size blocks: 2183223 aes-128 cbc's in 3.00s
Doing aes-128 cbc for 3s on 256 size blocks: 567130 aes-128 cbc's in 3.00s
Doing aes-128 cbc for 3s on 1024 size blocks: 142528 aes-128 cbc's in 3.00s
Doing aes-128 cbc for 3s on 8192 size blocks: 17868 aes-128 cbc's in 3.00s
Doing aes-128 cbc for 3s on 16384 size blocks: 8920 aes-128 cbc's in 3.00s
type
aes-128 cbc 40620.48k 46575.42k 48395.09k 48649.56k 48791.55k 48715.09k
aes-256-cbc
Doing aes-256 cbc for 3s on 16 size blocks: 6250272 aes-256 cbc's in 2.99s
Doing aes-256 cbc for 3s on 64 size blocks: 1725018 aes-256 cbc's in 3.00s
Doing aes-256 cbc for 3s on 256 size blocks: 442600 aes-256 cbc's in 3.00s
Doing aes-256 cbc for 3s on 1024 size blocks: 111542 aes-256 cbc's in 3.00s
Doing aes-256 cbc for 3s on 8192 size blocks: 13923 aes-256 cbc's in 3.00s
Doing aes-256 cbc for 3s on 16384 size blocks: 6916 aes-256 cbc's in 3.00s
type
aes-256 cbc 33446.27k 36800.38k 37768.53k 38073.00k 38019.07k 37770.58k
rsa2048
Doing 2048 bit private rsa's for 10s: 1050 2048 bit private RSA's in 10.00s
Doing 2048 bit public rsa's for 10s: 48474 2048 bit public RSA's in 9.99s
### r33345 ### CPU locked @1400 MHz
aes-128-cbc
Doing aes-128 cbc for 3s on 16 size blocks: 7941199 aes-128 cbc's in 3.00s
Doing aes-128 cbc for 3s on 64 size blocks: 2173531 aes-128 cbc's in 3.00s
Doing aes-128 cbc for 3s on 256 size blocks: 564360 aes-128 cbc's in 3.00s
Doing aes-128 cbc for 3s on 1024 size blocks: 143520 aes-128 cbc's in 3.00s
Doing aes-128 cbc for 3s on 8192 size blocks: 17903 aes-128 cbc's in 3.00s
Doing aes-128 cbc for 3s on 16384 size blocks: 8947 aes-128 cbc's in 3.00s
type
aes-128 cbc 42353.06k 46368.66k 48158.72k 48988.16k 48887.13k 48862.55k
aes-256-cbc
Doing aes-256 cbc for 3s on 16 size blocks: 6553562 aes-256 cbc's in 3.00s
Doing aes-256 cbc for 3s on 64 size blocks: 1741815 aes-256 cbc's in 3.00s
Doing aes-256 cbc for 3s on 256 size blocks: 444154 aes-256 cbc's in 3.00s
Doing aes-256 cbc for 3s on 1024 size blocks: 111680 aes-256 cbc's in 3.00s
Doing aes-256 cbc for 3s on 8192 size blocks: 13996 aes-256 cbc's in 2.99s
Doing aes-256 cbc for 3s on 16384 size blocks: 7003 aes-256 cbc's in 3.00s
type
aes-256 cbc 34952.33k 37158.72k 37901.14k 38120.11k 38346.23k 38245.72k
rsa2048
Doing 2048 bit private rsa's for 10s: 1058 2048 bit private RSA's in 10.00s
Doing 2048 bit public rsa's for 10s: 49115 2048 bit public RSA's in 10.00s
Joined: 16 Apr 2016 Posts: 307 Location: California
Posted: Tue Sep 19, 2017 5:10 Post subject: Update
Hooked up Brand New Shiny R7800 today that I ordered for testing VPN Speeds. Hit a max of 107 Mbps on the R7800 today at AES-128-CBC. The connection I am testing on is a 110Mbps Connection and I will be testing the 200Mbps Connection tomorrow.
Setup
VPN Service: PrivateInternetAccess to SiliconValley
CPU Clock Speed is at 1725 Mhz Maxed with the Tweak...
Not too Shabby... It's outperforming the EA8500 for sure, but for the price of the R7800 I am not impressed. Average cost is about $220 for a R7800 and average for a used or refurb EA8500 is $70
I have hit 90Mbps on a EA8500 with AES-128-CBC
However, in no way does this come close to the wrt3200acm vpn speeds and it barely competes with the Linksys WRT1900ACS.
Out of all the routers, for the bang for the buck, the EA8500 has impressed me the most. _________________ My Karma ran over your Dogma
SploitWorks Custom Flashed Routers
Posted: Tue Sep 19, 2017 14:13 Post subject: Re: Update
sploit wrote:
Hooked up Brand New Shiny R7800 today that I ordered for testing VPN Speeds. Hit a max of 107 Mbps on the R7800 today at AES-128-CBC. The connection I am testing on is a 110Mbps Connection and I will be testing the 200Mbps Connection tomorrow.
Setup
VPN Service: PrivateInternetAccess to SiliconValley
CPU Clock Speed is at 1725 Mhz Maxed with the Tweak...
Not too Shabby... It's outperforming the EA8500 for sure, but for the price of the R7800 I am not impressed. Average cost is about $220 for a R7800 and average for a used or refurb EA8500 is $70
I have hit 90Mbps on a EA8500 with AES-128-CBC
However, in no way does this come close to the wrt3200acm vpn speeds and it barely competes with the Linksys WRT1900ACS.
Out of all the routers, for the bang for the buck, the EA8500 has impressed me the most.
How can you even conclude that, if you don't even know what the real max speed is, since the R7800 maxing out your 110mbps line? _________________ R6400v2 (boardID:30) - Kong 36480 running since 03/09/18 - (AP - DNSMasq - AdBlocking - QoS) R7800 - BS 31924 running since 05/26/17 - (AP - OpenVPN Client - DNSMasq - AdBlocking - QoS) R7000 - BS 30771 running since 12/16/16 - (AP - NAS - FTP - SMB - OpenVPN Server - Transmission - DDNS - DNSMasq - AdBlocking - QoS) R6250 - BS 29193 running since 03/20/16 - (AP - NAS - FTP - SMB - DNSMasq - AdBlocking)
Joined: 17 Jan 2018 Posts: 64 Location: Georgia, USA
Posted: Sat May 12, 2018 9:40 Post subject:
I normally average 40 to 50Mbps on my PIA connection (sometimes less and sometimes more).
With this script I hit 110Mbps down and 11Mbps up on my 100/10 Comcast service using AES-128 CBC. _________________ R7800 r53339 std (08/01/23)
Private network on bridge br0 = eth1 (vlan 1) + wlan0 + wlan1.
Guest network on bridge br1 = eth1.4 (vlan 4) + VAPs (wlan0.1 + wlan1.1) for IOT devices
(Roku's, Amazon Echos, smart switches, etc.) and guest.
Noob still finding my way.
swconfig dev switch0 set enable_vlan 1
swconfig dev switch0 vlan 1 set ports "1 2 6"
swconfig dev switch0 vlan 4 set ports "3 4 6t"
swconfig dev switch0 set apply
vconfig add eth1 4
brctl addif br1 eth1.4
ifconfig eth1.4 up
Posted: Sun May 27, 2018 20:49 Post subject: Re: Update
sploit wrote:
Hooked up Brand New Shiny R7800 today that I ordered for testing VPN Speeds. Hit a max of 107 Mbps on the R7800 today at AES-128-CBC. The connection I am testing on is a 110Mbps Connection and I will be testing the 200Mbps Connection tomorrow.
Setup
VPN Service: PrivateInternetAccess to SiliconValley
CPU Clock Speed is at 1725 Mhz Maxed with the Tweak...
Not too Shabby... It's outperforming the EA8500 for sure, but for the price of the R7800 I am not impressed. Average cost is about $220 for a R7800 and average for a used or refurb EA8500 is $70
I have hit 90Mbps on a EA8500 with AES-128-CBC
However, in no way does this come close to the wrt3200acm vpn speeds and it barely competes with the Linksys WRT1900ACS.
Out of all the routers, for the bang for the buck, the EA8500 has impressed me the most.
Wait, so you are running your router at 1725ghz 24/7?
I noticed when I ran the command, my cpu was pegged at max but after the reboot (krait) its back to normal.
And that command needs to be always in the startup script?
thxs
d
If you want it always on the yes you need to put it in startup. It adds ~3C more so it's nothing. _________________ R6400v2 (boardID:30) - Kong 36480 running since 03/09/18 - (AP - DNSMasq - AdBlocking - QoS) R7800 - BS 31924 running since 05/26/17 - (AP - OpenVPN Client - DNSMasq - AdBlocking - QoS) R7000 - BS 30771 running since 12/16/16 - (AP - NAS - FTP - SMB - OpenVPN Server - Transmission - DDNS - DNSMasq - AdBlocking - QoS) R6250 - BS 29193 running since 03/20/16 - (AP - NAS - FTP - SMB - DNSMasq - AdBlocking)
I have only moved the WAN to core 0 via the smp_affinity command. I am getting almost the entire bandwidth from my provider using this tweak. I have PS Vue and no lag especially with sports,,,,I am running QOS and all seems to be good.I do have SFE on but not sure if its beneficial since I have a 100/5 Mb connection. Can you or others suggest some additional tweaks?
thxs
d
I have only moved the WAN to core 0 via the smp_affinity command. I am getting almost the entire bandwidth from my provider using this tweak. I have PS Vue and no lag especially with sports,,,,I am running QOS and all seems to be good.I do have SFE on but not sure if its beneficial since I have a 100/5 Mb connection. Can you or others suggest some additional tweaks?
thxs
d
Governor and IRQ tweaks are the only ones proven to have impact. SFE for your bandwidth is useless plus QoS downstream won't work with it enabled. _________________ R6400v2 (boardID:30) - Kong 36480 running since 03/09/18 - (AP - DNSMasq - AdBlocking - QoS) R7800 - BS 31924 running since 05/26/17 - (AP - OpenVPN Client - DNSMasq - AdBlocking - QoS) R7000 - BS 30771 running since 12/16/16 - (AP - NAS - FTP - SMB - OpenVPN Server - Transmission - DDNS - DNSMasq - AdBlocking - QoS) R6250 - BS 29193 running since 03/20/16 - (AP - NAS - FTP - SMB - DNSMasq - AdBlocking)
I have only moved the WAN to core 0 via the smp_affinity command. I am getting almost the entire bandwidth from my provider using this tweak. I have PS Vue and no lag especially with sports,,,,I am running QOS and all seems to be good.I do have SFE on but not sure if its beneficial since I have a 100/5 Mb connection. Can you or others suggest some additional tweaks?
thxs
d
How did you add smp_affinity command?
Last edited by savagepagan on Sun Jun 10, 2018 14:17; edited 1 time in total
I have only moved the WAN to core 0 via the smp_affinity command. I am getting almost the entire bandwidth from my provider using this tweak. I have PS Vue and no lag especially with sports,,,,I am running QOS and all seems to be good.I do have SFE on but not sure if its beneficial since I have a 100/5 Mb connection. Can you or others suggest some additional tweaks?
thxs
d