WRT1900ACS V2 - Firmware

Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.)
Goto page Previous  1, 2, 3 ... 10, 11, 12, 13  Next
Author Message
stefan33
DD-WRT Novice


Joined: 05 Feb 2018
Posts: 32

PostPosted: Mon Mar 19, 2018 11:34    Post subject: Reply with quote
I solved alone unchecking this:

Use DNSMasq for DHCP
Use DNSMasq for DNS
DHCP-Authoritative


But is it correct? Or maybe I can solve better???
Sponsor
adriansuri
DD-WRT Novice


Joined: 01 Oct 2017
Posts: 39

PostPosted: Tue Mar 20, 2018 16:49    Post subject: wifi Reply with quote
HI

Just a thought I am presuming the wifi was working with the stock firmware, I personally have never really had any issues with WiFi, though I mainly have phones etc connected as my computer is via ethernet



Regards

Adrian
ayangjibrut
DD-WRT Novice


Joined: 14 Nov 2014
Posts: 4

PostPosted: Wed Apr 18, 2018 4:36    Post subject: Reply with quote
any latest stable version of firmware release for WRT1900ACS V2?
or any best build to flash?

thanks!
slimbrick87
DD-WRT User


Joined: 10 Jul 2017
Posts: 92

PostPosted: Wed Apr 18, 2018 11:19    Post subject: Reply with quote
ayangjibrut wrote:
any latest stable version of firmware release for WRT1900ACS V2?
or any best build to flash?

thanks!


I use r35531 on my WRT1900ACS V2. It is stable, has high wireless speeds, runs an OpenVPN client well, and supports my household's internet, smart home, and audio/video streaming needs. There are two more recent releases but from what I've read on this forum I decided not to upgrade.

_________________
FIRMWARE: 6-20-2018 - r36168
MODEM: ARRIS SURFBoard SB6183
ROUTER: Linksys WRT1900ACS V2
ISP: TWC Spectrum 100 Mbps Download | 10 Mbps Upload
SERVICES: IVPN OpenVPN Client
wildflower1975
DD-WRT Novice


Joined: 10 Sep 2012
Posts: 5

PostPosted: Thu Apr 19, 2018 11:43    Post subject: Reply with quote
I'm using this one as my 1st try at DD-WRT on this router:
DD-WRT v3.0-r35681 std (c) 2018 NewMedia-NET GmbH
Release: 04/06/18

Both wireless bands are working and the USB storage works, I have a Samba share set as a network drive on the Ubuntu 17.10 Laptop

I haven't looked into speeds and haven't really got anything to compare against as of yet.

My main purpose is to get Yamon 3.4.4 working, the install was straight forward but there might be some configuration yet to complete to get the hourly data correct.
myersw
DD-WRT Guru


Joined: 13 Jun 2006
Posts: 1608
Location: SE Michigan USA

PostPosted: Thu Apr 19, 2018 19:07    Post subject: Reply with quote
ayangjibrut wrote:
any latest stable version of firmware release for WRT1900ACS V2?
or any best build to flash?

thanks!

Did you look at this link?
ftp://ftp.dd-wrt.com/betas/2018/
There are a number of builds to try. There is no such thing as a stable version. They are all beta.

Also read the stickies or threads in my sig (same) as there is lots of good info about working with the WRT's.

_________________
Unifi Security Gateway: Unifi Firmware
Netgear r7800: Voxel Firmware
Modem:Netgear CM500V voice and Data.
ISP:Comcast
tutorial for flashing "WRT" series:
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=287813
DD-WRT Installation, Upgrade & Basic Setup–Cliff Notes:
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=311117
Kong DD-WRT Config Tutorial:
http://www.instructables.com/id/Install-and-Configure-a-DD-WRT-Kong-Router/
I tried to be normal once. Worst 2 minutes ever.
myersw
DD-WRT Guru


Joined: 13 Jun 2006
Posts: 1608
Location: SE Michigan USA

PostPosted: Thu Apr 19, 2018 19:09    Post subject: Reply with quote
Delete
_________________
Unifi Security Gateway: Unifi Firmware
Netgear r7800: Voxel Firmware
Modem:Netgear CM500V voice and Data.
ISP:Comcast
tutorial for flashing "WRT" series:
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=287813
DD-WRT Installation, Upgrade & Basic Setup–Cliff Notes:
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=311117
Kong DD-WRT Config Tutorial:
http://www.instructables.com/id/Install-and-Configure-a-DD-WRT-Kong-Router/
I tried to be normal once. Worst 2 minutes ever.


Last edited by myersw on Fri Apr 20, 2018 0:02; edited 1 time in total
stefan33
DD-WRT Novice


Joined: 05 Feb 2018
Posts: 32

PostPosted: Thu Apr 19, 2018 21:28    Post subject: Reply with quote
Please one question: I formatted one usb 3.0 drive of 1,5 TB like i found here:

https://www.dd-wrt.com/wiki/index.php/How_to_-_Format_and_Partition_External_Storage_Device

But i found:

USB Support
Core USB SupportEnable Disable
USB Printer SupportEnable Disable
USB Storage SupportEnable Disable
USB Over IPEnable Disable
Automatic Drive MountEnable Disable
Run-on-mount Script Name
Mount this Partition to /jffs
UUID
Mount this Partition to /opt
UUID
Use SES Button to remove drivesEnable Disable
Disk Info

--- /dev/sda
Block device, size 1.365 TiB (1500301910016 bytes)
DOS/MBR partition map
Partition 1: 1.999 GiB (2146435072 bytes, 4192256 sectors from 2048)
Type 0x83 (Linux)
Ext3 file system
Volume name "Optware"
UUID 2AEFC77E-22D8-D301-0062-C77E22D8D301 (NCS)
Volume size 1.999 GiB (2146435072 bytes, 2096128 blocks of 1 KiB)
Partition 2: 512 MiB (536870912 bytes, 1048576 sectors from 4194304)
Type 0x82 (Linux swap / Solaris)
Linux swap, version 2, subversion 1, 4 KiB pages, little-endian
Swap size 512.0 MiB (536862720 bytes, 131070 pages of 4 KiB)
Partition 3: 1.362 TiB (1497617137664 bytes, 2925033472 sectors from 5242880)
Type 0x83 (Linux)
Ext3 file system
UUID F6EE278C-22D8-D301-C02E-238C22D8D301 (MS GUID)
Volume size 1.362 TiB (1497617137664 bytes, 365629184 blocks of 4 KiB)
GPT partition map, block size 512 bytes, 128 entries
Disk size 1.365 TiB (1500301910016 bytes, 2930277168 blocks of 512 bytes)
Disk GUID D423E44A-0829-27B6-5F93-DD017B8C4CE6
Partition 1: unused
/dev/sda not mounted Unsupported Filesystem

--- /dev/sda1
Block device, size 1.999 GiB (2146435072 bytes)
Ext3 file system
Volume name "Optware"
UUID 2AEFC77E-22D8-D301-0062-C77E22D8D301 (NCS)
Volume size 1.999 GiB (2146435072 bytes, 2096128 blocks of 1 KiB)
/dev/sda1 mounted to /opt

/dev/sda1 mounted to /tmp/mnt/sda1

--- /dev/sda2
Block device, size 512 MiB (536870912 bytes)
Linux swap, version 2, subversion 1, 4 KiB pages, little-endian
Swap size 512.0 MiB (536862720 bytes, 131070 pages of 4 KiB)
/dev/sda2 mounted to swap

--- /dev/sda3
Block device, size 1.362 TiB (1497617137664 bytes)
Ext3 file system
UUID F6EE278C-22D8-D301-C02E-238C22D8D301 (MS GUID)
Volume size 1.362 TiB (1497617137664 bytes, 365629184 blocks of 4 KiB)
/dev/sda3 mounted to /tmp/mnt/sda3




But why: /dev/sda not mounted Unsupported Filesystem


What I made wrong? Thank you.
doniNZ74
DD-WRT User


Joined: 27 Apr 2016
Posts: 112
Location: Down down .... under

PostPosted: Thu Apr 19, 2018 21:29    Post subject: Reply with quote
Using Firmware v3.0-r35531 (03/26/1Cool on my v2, 15 days of uptime now. Pretty stable. Have not moved onto the newer releases yet.
_________________
Linksys WRT1900ACv2 - My new go to build: DD-WRT v3.0-r44048 std (08/02/20) - STABLE Smile

My WRT1900ACv2 has now been serving me for more than 5years Smile Most reliable router I have ever owned!
eurobeat
DD-WRT Novice


Joined: 04 May 2018
Posts: 2

PostPosted: Fri May 04, 2018 23:12    Post subject: r35831 and r35874 build doesn't work for me Reply with quote
Just wondering if anyone tried the r35831 and r35874 build. Both is having problem on internet connection after about 4 minutes after upgrade or factory reset. I have to go back to r30949 to be stable again.

on the side note, when the r35831 and r35874 was still working during the 4 minutes, the speed seems to be faster compare to r30949

update: Just downgraded to r35531 and has been working for 15 minutes.

Internet Router: Linksys WRT1900ACS V2
DD-WRT firmware: DD-WRT v3.0-r30949 std (12/15/16)
ISP: Comcast
nbj1998
DD-WRT Novice


Joined: 28 Jul 2017
Posts: 2

PostPosted: Sat May 05, 2018 0:35    Post subject: WRT 1900ACS v2 QoS Reply with quote
Can anyone tell me if QoS and/or ipv6 is working on the WRT 1900ACS v2 r35531 build?

Many thanks.
xfbo
DD-WRT Novice


Joined: 04 Jun 2017
Posts: 6

PostPosted: Thu May 17, 2018 20:35    Post subject: Reply with quote
Hello,

Need some help id'ing my router, on the bottom label, where it says 'Model No.', it's listed as 'WRT1900ACS V2'.

In the FCC ID section it's listed as 'WRT1900AC V2'

Which is it? Shocked
stefan33
DD-WRT Novice


Joined: 05 Feb 2018
Posts: 32

PostPosted: Fri Mar 22, 2019 1:29    Post subject: Reply with quote
xfbo wrote:
Hello,

Need some help id'ing my router, on the bottom label, where it says 'Model No.', it's listed as 'WRT1900ACS V2'.

In the FCC ID section it's listed as 'WRT1900AC V2'

Which is it? Shocked


It's 1900ACSV2.


Anyone know what is now the most stable firmware? Many thanks...
jonahmt21
DD-WRT Novice


Joined: 03 Apr 2017
Posts: 16

PostPosted: Mon Apr 08, 2019 20:25    Post subject: Reply with quote
39144 seems stable. up for 3 days now without issues
SurprisedItWorks
DD-WRT Guru


Joined: 04 Aug 2018
Posts: 1446
Location: Appalachian mountains, USA

PostPosted: Tue Apr 09, 2019 16:59    Post subject: Reply with quote
Agree: I've been using 39144 on multiple WRT1900ACSv2's for several weeks and have encountered no new issues and no old ones that don't have fairly straightforward workarounds. I've found this model router to be very trouble free, actually. It doesn't seem to have near the dd-wrt issues that the other Linksys/Marvell routers have had.

I should add though that I flashed from factory Linksys firmware to 38159 and from there webflashed to 39144. I have not tried going directly from Linksys firmware to 39144. No reason to think it will be a problem though.

_________________
2x Netgear XR500 and 3x Linksys WRT1900ACSv2 on 53544: VLANs, VAPs, NAS, station mode, OpenVPN client (AirVPN), wireguard server (AirVPN port forward) and clients (AzireVPN, AirVPN, private), 3 DNSCrypt providers via VPN.
Goto page Previous  1, 2, 3 ... 10, 11, 12, 13  Next Display posts from previous:    Page 11 of 13
Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.) All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum