New Asus RT-AC68U

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Advanced Networking
Author Message
Pdobrien3
DD-WRT User


Joined: 12 Dec 2015
Posts: 99

PostPosted: Wed Apr 11, 2018 11:05    Post subject: New Asus RT-AC68U Reply with quote
Hello All,

I have been having issues with intermittent network pauses on my router (RT-AC68U) so I purchased a new one (RT-AC68U). I was thinking I could just upload the settings from my old router to my new router. That didn't happen. I have noticed that the max frequency on the old router under overclocking is 800 MHz where the new router is 1400MHz.

Anyway, I have run into a snag setting up the new router. I seem to have both a vlan0 port and a vlan1 port. I have everything set exactly as the old router. I tried to nvram unset vlan0ports but after a reboot, they came back.

My router also won't issue any dhcp.

I have two WAP each with two guest SSIDs on vlan 14 and vlan 15.

Here are my nvram settings:

nvram show | grep vlan.*ports
vlan14ports=2t 5
vlan2ports=0 5u
vlan0ports=1 2 3 4 5*
size: 60465 bytes (5071 left)
vlan15ports=2t 5
vlan1ports=1 2t 3 4 5*

nvram show | grep port.*vlans
port5vlans=1 2 14 15 16
port3vlans=1 18 19 21
size: 60465 bytes (5071 left)
port1vlans=1 18 19 21
port4vlans=1 18 19 21
port2vlans=1 14 15 16 18 19 21
port0vlans=2 18 19 21
Sponsor
Pdobrien3
DD-WRT User


Joined: 12 Dec 2015
Posts: 99

PostPosted: Thu Apr 12, 2018 0:45    Post subject: Reply with quote
I forgot to mention I am running 3.0-r35531.
Pdobrien3
DD-WRT User


Joined: 12 Dec 2015
Posts: 99

PostPosted: Mon Apr 16, 2018 19:57    Post subject: Reply with quote
So....I have started back at square one. I got all three bridges setup (two guest networks), I got dhcp working on each subnet, and the wireless setup. Next step was static IPs. Any reason setting up static IPs would cause DHCP to not work on any of the wireless SSIDs or the 4 LAN ports?

Once I setup static IPs I get "no internet connection" on the wireless.

thanks in advance.....pulling my hair out on this one.
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 1827
Location: Netherlands

PostPosted: Mon Apr 16, 2018 21:08    Post subject: Reply with quote
I assume you mean static leases?
If so "strange" characters in the name of the static leases can cause trouble. Be sure to only use characters

_________________
Router Netgear R6400, Linksys EA6900 (XvortexCFE), Linksys E2000 (converted WRT320N), WRT54GS v1.
Install guide see Linksys EA6900: http://www.dd-wrt.com/phpBB2/viewtopic.php?t=291230
Pdobrien3
DD-WRT User


Joined: 12 Dec 2015
Posts: 99

PostPosted: Tue Apr 17, 2018 0:11    Post subject: Reply with quote
egc wrote:
I assume you mean static leases?


Thank you for your response. Yes, my apologies, it has been one of those days. I did in fact mean static leases.

egc wrote:
If so "strange" characters in the name of the static leases can cause trouble. Be sure to only use characters


I have checked, double-checked, and triple-checked my Mac addresses, names, and IP addresses. Everything was also copied/pasted from a working settings.bin file.

Could the copying from the file be the issue?

I also have 59 static leases. Have a reached a limit? Like I said, they all worked fine on the older AC68U

Mind blowing
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 1827
Location: Netherlands

PostPosted: Tue Apr 17, 2018 8:18    Post subject: Reply with quote
Copying and pasting could be the culprit i tried it once and it was not working
_________________
Router Netgear R6400, Linksys EA6900 (XvortexCFE), Linksys E2000 (converted WRT320N), WRT54GS v1.
Install guide see Linksys EA6900: http://www.dd-wrt.com/phpBB2/viewtopic.php?t=291230
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Advanced Networking All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum