Router Model: Linksys EA8500
Status: some small issues
Reset: no
Errors:
no performance issues and sftp being gone is more of an annoyance but otherwise seems like a stable build.
1) some syslog spam
Apr 9 23:26:11 unknown daemon.err httpd[1785]: Request Error Code 408: No request appeared within a reasonable time period.
There is one little annoying "feature" on BS builds: log time stamps are UTC regardless what time zone router is setup on. Very confusing when looking for the time on some event, like when an user got connected. Easy get mislead forgetting to calculate the local time when the event happened. Some times almost confronting young users about their Internet usage .
Observation: Love the firmware, and all the comunity surrounding it. Very interested in helping in any way that I could. A big thanks for all of your work !
<edit: Fixed the VAp Bug. Reported Fix in the renferenced Post>
CPU
CPU ModelQualcomm Atheros QCA9558 ver 1 rev 1.0 (0x1130)
CPU Cores1
CPU Features MIPS32r1 MIPS32r2 MIPS16
CPU Clock720 MHz
Load Average
100%2.33, 1.22, 0.76
Temperaturesath1 44 °C
Errors:
Cpu pegging at 100% with near zero traffic
https errors still being logged spam like fashion - same as many other reports
SFTP with certificate only still doesnt work - Dropbear closes connection immediately after SUCCESFUL authpriv validation
Apr 10 22:43:18 Cisco99533 kern.warn kernel: [ 6.450000] lzma_compress: module license 'unspecified' taints kernel.
Apr 10 22:43:18 Cisco99533 kern.warn kernel: [ 6.460000] Disabling lock debugging due to kernel taint
Apr 10 22:43:18 Cisco99533 kern.warn kernel: [ 8.040000] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
Apr 10 22:43:18 Cisco99533 kern.warn kernel: [ 8.050000] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/cal-pci-0000:01:00.0.bin failed with error -2
Apr 10 22:43:18 Cisco99533 kern.warn kernel: [ 8.060000] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-6.bin failed with error -2
Apr 10 22:43:18 Cisco99533 kern.info kernel: [ 8.340000] ath10k_pci 0000:01:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
Apr 10 22:43:18 Cisco99533 kern.info kernel: [ 8.350000] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
Apr 10 22:43:18 Cisco99533 kern.info kernel: [ 8.360000] ath10k_pci 0000:01:00.0: firmware ver 10.2.4-1.0-00037 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 a4a52adb
Apr 10 22:43:18 Cisco99533 kern.warn kernel: [ 8.420000] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
Apr 10 22:43:18 Cisco99533 kern.info kernel: [ 8.430000] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 3c50c4ee
Apr 10 22:43:18 Cisco99533 kern.warn kernel: [ 8.530000] ath10k_pci 0000:01:00.0: otp stream is empty, using board.bin contents
Upgraded all from #r35034 with no issues....Thanks BS !!!
UPDATE :
Uptime... 2 days 9 hrs. This build is producing consistently FASTER wifi speeds at AP, Stations and everything connected than the last 5-6 builds I been on. The log looks normal except for a connection error to the NTP server. I changed to a server a little farther down the list and it hasn`t returned. So far, this is the best build I`ve seen in a while. Excellent work BS and all !!
Last edited by ramblin on Sat Apr 14, 2018 2:28; edited 1 time in total
Posted: Thu Apr 12, 2018 23:23 Post subject: Netgear WNDR3700v4
Port forwarding is still totally fucked up.
GUI will not accept values when I try to enter my settings from previous build, they get shuffled round and mangled when you hit the save button!!!!!!!
Joined: 16 Nov 2015 Posts: 6388 Location: UK, London, just across the river..
Posted: Sat Apr 14, 2018 12:05 Post subject:
Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r35681 std (04/06/1
Kernel Version Linux 3.18.102 #11796 Fri Apr 6 06:21:13 CEST 2018 mips
update: web GUI 35244 > 35681
reset: NO
status: Operational
errors: it works... 2h so far so good _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,AP Isolation,Ad-Block,Firewall
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear R7800 --DD-WRT 55363 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55363 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Router Model: TP-Link TL-WR740 v4
Firmware Version: DD-WRT v3.0-r35681 std
Kernel Version: Linux 3.10.108-dd #53401 Fri Apr 6 05:10:53 CEST 2018 mips
Previous: DD-WRT v3.0-r31899 std
Reset: No
Uptime: 24:00 (HH:MM) every day reboot scheduled
Issues: Web interface crash on status page, Active IP Connections.
Stressing WiFi crash and reboot overload RTS/CTS or Short preamble enabled
Now that i have been using this build for some time, there is defintiely something off. The cpu has been consistently very high vs 2 builds ago avg of a 4x multiplier or more.
Curiosly if working in the webui and makeing changes even minor ones, the cpu utilization just runs away. the system remians responsive.
Im basing all this off the readings on the staus page, now if the problem is with the counters or its acttually that high is a good question, Especially since the readings would indicate 125% utilizaton at times.