Posted: Wed Apr 25, 2018 19:36 Post subject: LAN ports have no internet access
I've created a repeater and bridge the two routers but the Wifi works great but if I try to ping a website on the LAN ports it says 'destination unreachable'.
What am I doing wrong?
Posted: Mon Feb 04, 2019 23:31 Post subject: Re: LAN ports have no internet access
robman50 wrote:
I've created a repeater and bridge the two routers but the Wifi works great but if I try to ping a website on the LAN ports it says 'destination unreachable'.
What am I doing wrong?
same issue even my other router said it is wireless connected no help ,
flash "default to ddwrt" > "tl-wr941ndv6-webflash" > lan ports works even gor wan ip , tried another way add mac address and connect wireless network 'siresurvey' still got wan ip but unable to connect world wide web.
there are some apps which i don't need can i remove and install openvpn
Posted: Tue Jun 18, 2019 22:45 Post subject: Re: LAN ports have no internet access
robman50 wrote:
I've created a repeater and bridge the two routers but the Wifi works great but if I try to ping a website on the LAN ports it says 'destination unreachable'.
What am I doing wrong?
I'm having this problem too on a wr842 v1 ...
Can't understand what's going wrong under the hood
Posted: Wed Sep 25, 2019 12:04 Post subject: Re: LAN ports have no internet access
If LAN device cannot communicate to other LAN connected devices, you may have VLAN setting problem on the internal switch LAN ports.
You should check it by reseting device to factory and setup the device as AP (all WAN , LAN, WLAN ports on the same subnet) and check if WLAN device and all LAN port devices are able to ping each other and if everything works than reconfigure to repeater.
If communication works out of the box you don`t have the VLAN issue on the internal switch LAN ports, if you have this issue you get destination unreachable when pinging LAN device from WLAN or LAN device to other LAN device.
On my device WR940ND/941ND v6 only WLAN to internet router and LAN to internet worked LAN to LAN and WWLAN to LAN result in destination unreachable so I had to add VLAN 1 to switch0 on eth0 (LAN Ports) at startup command on administration tab :
swconfig dev switch0 set reset 1
swconfig dev switch0 set enable_vlan 1
swconfig dev switch0 set apply