Joined: 30 Jan 2015 Posts: 676 Location: Texas, USA
Posted: Fri Mar 23, 2018 7:30 Post subject:
Router: Netgear Nighthawk X10 R9000
Firmware: DD-WRT v3.0-r35452 std (03/20/1
Kernel: Linux 4.9.88 #145 SMP PREEMPT Sun Mar 18 18:30:06 CET 2018 armv7l
Reset: No
Goodies: This build seems to be faster and slightly better QOS.
Errors/Issues:
- VHT160 doesn't go > 1300mbps
- LZO works only one way in simplex mode.
- Update firmware. breaks internet connection.
To fix, had to disable and apply dnsCrypt on the services page and re-enable.
- WAN dhcp drops automatically after 36 hrs. This happened twice. Reverted back to 03/05/18 build.
Edit:
https://www.dslreports.com/speedtest/31185298 _________________ ASUS GT-BE98 PRO Main: Fiber 5gbps up/down
ASUS AXE16000: AI Mesh node
2 X ASUS RT-AX89X: AI Mesh nodes
QNAP QSW-1208-8C 12-Port 10GbE Switch
XS712T ProSafe 12-Port 10GbE Switch
3 X R9000 DD-WRT Mesh
Last edited by labo on Fri Mar 23, 2018 15:05; edited 1 time in total
Router Name TP-WA901ND
Router-Modell TP-Link TL-WA901ND v3
Firmware-Version DD-WRT v3.0-r35452 std (03/20/18)
Kernel Version Linux 3.18.100 #10302 Tue Mar 20 06:07:59 CET 2018 mips
Update via GUI, no reset.
- Works so far without errors as far as detectable
- LEDs: set to green color
- 2.4 GHz WLAN: accessible, speed and power OK
- 5.0 GHz WLAN: not available
GUI Theme Preview:
blue: broken (default view displayed)
brainslayer: OK
cyan: broken
elegant: broken
green: broken
kromo: OK
orange: broken
red: broken
wikar: OK
xirian: OK
yellow: broken
I'd suggest removing the broken/unavailable themes from the drop-down menu if it is not planned to work on them.
Router: DIR-615e3
Firmware: dir615e3-firmware.bin (v3.0-r35452 std)
Kernel: Linux 3.10.108-dd #51864 Tue Mar 20 05:19:36 CET 2018 mips
Status: Buggy on gui
Reset: No
Notes on configuration:
DNSMasq
Virtual wireless with bridging x2
multiple DHCP server
QOS
Errors:
1. Apply settings on multiple pages does not work (for example Setup->Basic Setup, Setup->Network and Security->Firewall)
2. Firmware upgrade button does not work (I have had to use command line to upgrade/downgrade)
3. Factory Defaults (reset) does not work (apparently broken after 33006)
4. Firmware restore button broken (apparently broken after 33006)
5. Switch ports can not communicate with each other (see post https://www.dd-wrt.com/phpBB2/viewtopic.php?t=312371 ) [have not tested due to wanting isolation]
6. user.info : Authentication fail after each http login
7. On every hour (should not be err): daemon.err process_monitor[]: cyclic NTP Update success
Router: DIR-825 rev B1
Firmware: dir825-firmware.bin (v3.0-r35452 std)
Kernel: Linux 3.10.108-dd #51846 Tue Mar 20 04:41:08 CET 2018 mips
Status: Working
Reset: No
Notes on configuration:
Media Network
DNSMasq
Port Forwarding
DHCP reservation
Errors:
1. user.info : Authentication fail after each http login
2. On every hour (should not be err): daemon.err process_monitor[]: cyclic NTP Update success
Errors: Web upgrade still doesn't work (also from this build to #35531) otherwise this build seems to be ok.
Confirmed. Web update is broken in this build. Had to update to 35531 via Telnet as well.
Router Name TP-WA901ND
Router-Modell TP-Link TL-WA901ND v3
Firmware-Version DD-WRT v3.0-r35452 std (03/20/1
Kernel Version Linux 3.18.100 #10302 Tue Mar 20 06:07:59 CET 2018 mips
I used to use 12-04-2017-r33986 where I was able to sftp to the ssh port but that no longer works when I upgraded. SSH into the ssh port works fine and looking at logs, when I try to sftp, the connection as well as pubkey auth work fine but sftp isn't available.
Posted: Tue Apr 03, 2018 17:04 Post subject: httpd crashes
Tried first 35452, then 35531 - no change/same errors.
Router Model: TP-Link WR1043ND V2
Firmware Version: DD-WRT v3.0-r35531 std (03/26/1
Kernel Version: Linux 3.18.102 #10774 Mon Mar 26 04:13:09 CEST 2018 mips
CPU Model: Qualcomm Atheros QCA9558 ver 1 rev 1.0 (0x1130)
CPU Cores: 1
CPU Features: MIPS32r1 MIPS32r2 MIPS16
CPU Clock: 720 MHz
Status: mostly bearable but GUI/httpd crashing
Reset: Yes
Errors: httpd dies with SIGSEGV
Issues:
1) GUI / httpd crashes constantly. Eventually after a minute or so it restarts. I can't make the crash happen predictably (reliably reproduce it) but every dozen or so page loads eventually results in a crash.