Changelogs: SVN Changelog:through35244 (last build was 35034)
Summary: (deprecated after 29739)
Notes: 1. SFE accelerated NAT is in 33006+ builds but only in kernel 3.10 and newer 2. krack fixes for Broadcom were completed in 33678, including k26 (33655) & k24 (33656).
Tickets closed as 'fixed' (Broadcom-related and general): 1.6130: switch-robo driver, 4096 VLANs & switch port VLAN PCP bits' configuration
Issues, observations, and/or workarounds reported: 1. (egc) Policy-Based Routing broken if SFE enabled: http://svn.dd-wrt.com/ticket/5900 quarkysg's PBR+SFE fix: http://svn.dd-wrt.com/ticket/5986 2. (egc) "OpenVPN 2.4 is stable but you have to tweak your config" with: `mtu-disc yes` & `proto udp4` 3.Many router builds too big to flash6144
Template to copy (after "Code:") for posting a reply:
WARNING:This build thread is for reporting successes and problem with loading this experimental test build.
This is important info for developers and users. Always state your hardware model, version, and SPECIFIC build (e.g. dd-wrt.v24-33555_NEWD-2_K3.x_mega-nv64k.bin). Create your own thread to discuss any specific problems or questions, and please do not respond to such questions. This thread is to report info, not to seek answers, so posts not meeting this criteria may be deleted or moved. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless. If you don't understand the risk or know what build to flash and how to flash properly, with a means of recovery if it bricks, do NOT flash this experimental test build. _________________ #NAT/SFE/CTF: limited speed w/ DD#Repeater issues#DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo#
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
Joined: 18 Jul 2017 Posts: 45 Location: Wisconsin, USA
Posted: Mon Mar 05, 2018 17:12 Post subject:
Router/Version: Linksys EA6500 v1
Firmware: DD-WRT v3.0-r35244 giga ( 03/05/18 )
Kernel: Linux 3.10.108-dd #17960 Mon Mar 5 14:16:44 CET 2018 mips
Previous: DD-WRT v3.0-r35034 giga ( 02/17/18 )
Mode/Status: Gateway/AP
Setup: Using IPv6 via DNSMasq, DDNS, & Port Range Forward.
Reset: No
Issues/Errors: None so far
Everything appears to be running fine so far. _________________
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r35244 std ( 03/05/18 )
Kernel: Linux 4.4.120 #2685 SMP Mon Mar 5 08:03:45 CET 2018 armv7l
Previous: r35034
Mode/Status: Gateway / working
Reset: no
Issues/Errors: None so far
Uptime: 7m
Temperatures: CPU 60.8 °C / WL0 44.8 °C / WL1 48.5 °C
Posted: Mon Mar 05, 2018 18:28 Post subject: E1500
jerrytouille wrote:
Netgear R7000P
Firmware not available (the folder lists R8000).
I had assumed it was because the R7000P could use the R8000 firmware, though also odd there is no trailed build from BS, only Kong. But I have neither. The first MB or so of Kong's R7000P vs R8000 only has 4 bytes different: address 0x08-0B.
Anyone tried the BS build, or otherwise know what's up? BS? Kong?
Router/Version: Linksys E1500
Firmware: DD-WRT v3.0-r35244 mega ( 03/05/18 )
Kernel: Linux 3.10.108-dd #17976 Mon Mar 5 14:32:56 CET 2018 mips
Previous: 35034 k3x
Mode/Status: AP
Reset: no
Issues/Errors: Only been 15min; got the laptop wired and Nexus 5X on the wireless. Will update tomorrow. Like the F7D8302 on the last build, running `cat /proc/mtd` from Admin->Commands does not output correctly, something w/ the name field is eftup:
Posted: Mon Mar 05, 2018 19:16 Post subject: ASUS RT-AC68U & Linksys E2000
Asus RT-AC68U
Firmware: DD-WRT v3.0-r35244 (03/05/18) - (previous r35034)
Kernel: Linux 4.4.120 #2685 SMP Mon Mar 5 08:03:45 CET 2018 armv7l
5Ghz (Mixed) with 80Mhz channel width: Ok
SSH: Ok
Telnet: Disabled but tested to work
Site Survey: Ok
Wi-viz Survey 2.4Ghz & 5Ghz: Ok
Reset: Yes
Status: Ok
Uptime: 16 min
CPU Temperature: CPU 62.5 °C / WL0 43.5 °C / WL1 43.5 °C
2 x E2000
Firmware: DD-WRT v3.0-r35244 mega (03/05/18) - (previous r35034)
Kernel: Linux 3.10.108-dd #17976 Mon Mar 5 14:32:56 CET 2018 mips
2.4Ghz (NG-mixed) with 40Mhz channel width: Ok
SSH: Ok
Telnet: Disabled but tested to work
Site Survey: Ok
Wi-viz Survey 2.4Ghz: Ok
Reset: Yes
Status: Ok
Uptime: 30 min
CPU Temperature: WL0 50.0 °C
Upgrade w/o reset didn't work (had to TFTP older firmware to E2000). After reset and restoration of settings all looks good (for now).
All devices working as AP's each with individual 1Gb wired connections to main firewall
Posted: Mon Mar 05, 2018 23:11 Post subject: Asus RT-AC88U
Router/Version: Asus RT-AC88U
Firmware: DD-WRT v3.0-r33772 std (11/16/17)
Kernel: Linux 4.4.98 #2254 SMP Thu Nov 16 09:55:15 CET 2017 armv7l GNU/Linux
Previous: many and many not
Mode/Status: nothing new
Reset: no
Issues/Errors: new firmware file too big for this router (r33772->25,2 MB, r35244->27,4 MB), same problem with many builds before and always reported
With r33772: After a while (a week or so) wl0 (2,4 GHz) in GUI gone, only fix: reboot
Posted: Tue Mar 06, 2018 3:09 Post subject: DIR 890L A1
Router: DIR-890L HW:A1
CPU: Broadcom BCM4709
CPU Cores: 2
CPU Clock: 1000 MHz
CPU Features: EDSP
Firmware: DD-WRT v3.0-r35244 std (03/05/18)
Previous: 02-17-2018-r35034
Kernel: Linux 4.4.120 #2690 SMP Mon Mar 5 08:34:10 CET 2018 armv7l
Temp/Load: CPU 84.1 °C /NA 0.00, 0.02, 0.00
Reset: No
Errors/Issues: Not yet. (Uptime 90min) (not using IPV6, VPN nor USB)
Mode/Status: Configured as a simple access point to receive data from 9 wireless security
cameras.
Joined: 26 Mar 2013 Posts: 1855 Location: Hung Hom, Hong Kong
Posted: Tue Mar 06, 2018 4:23 Post subject:
Router/Version: Asus RT-N18U
Firmware: DD-WRT v3.0-r35244 std (03/05/18 )
Kernel: Linux 4.4.120 #2689 Mon Mar 5 08:28:11 CET 2018 armv7l
Previous: DD-WRT v3.0-r35034 std (02/17/18 )
Mode/Status: Access Point (AP), Wired Working
Reset: NO reset during firmware upgrade
Issues/Errors:
1. The ping to www.google.com increased from 2ms to 13ms (after setting a WAN domain name in
Setup->Basic Setup->Optional Settings->Domain Name?? Unable to reproduce this now)
Miscellaneous:
- Router not using IPv6, VPN nor USB
- Router is NOT working 24/7
- LAN LED ... too lazy to check! Meow... >@.@<
- Wireless function is off for the meantime
Old problems:
a. DDNS (inadyn) crashed in build 31722
b. Testing port-forwarding via WAN IP from within LAN not working in builds 34411-34760. Needed external proxy server.
c. NTP client not working in builds 34886-34876,35034 (affecting process_monitor?)
speedtest.net.asus.rt-n18u.dd-wrt.bs.35244.png
Description:
speedtest.net.asus.rt-n18u.dd-wrt.bs.35244
Filesize:
13.73 KB
Viewed:
15210 Time(s)
_________________ Router: Asus RT-N18U (rev. A1)
Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!
Router/Version:
ASUS RT-AC66U
ASUS RT-AC56U
Linksys WRT1900ACSV2
The technical issue is continue happening in R35244.
Firmware: DD-WRT v3.0-r35034 std (02/17/1
ASUS RT-AC56U
Kernel: Linux 4.4.116-rc1 #2608 SMP Sat Feb 17 11:24:53 CET 2018 armv7l
Mode/Status: Repeater Mode
Reset: No
Issues/Errors:
1. WL1 Maximum Speed is 144mbps. The upload speed is kept 72mbps.
2. Mac Filter of WL1.x AND WL0.x does not provide in Virtual Interfaces in all broadcom chip
3. WL0 Speed is slow. The speed kepts around 3 to 6mb.
4. WeMO Switch does not support to connect all dd-wrt router unless CFE loader dd-wrt information was changed.
5. Instagram app in Android was limited. It load the picture very slow unless VPN is connected.
6. Cannot connect to contain WPA2 - Enterprise (MSChapV2) AP successfully. It just repeated to connected the AP and disconnected AP.
7. The Channel Width was limited about 2.4Ghz and 5.2Ghz. It does not be similar to WRT1900ACSV2.
ASUS RT-AC66U
Kernel: Linux 3.10.108-dd #17780 Sat Feb 17 17:23:18 CET 2018 mips
Mode/Status: WAN Connection Type - PPTP Server
Reset: No
Issues/Errors:
1. USB Printer Support Signal is not stable.
2. WL1 Maximum Speed show 144mbps.
3. Mac Filter of WL1 AND WL0 does not provide Virtual Interfaces in all broadcom chip.
4. WeMO Switch does not support to connect all dd-wrt router unless CFE loader dd-wrt information was changed.
5. Instagram app in Android was limited. It load the picture very slow unless VPN is connected.
6. The Channel Width was limited about 2.4Ghz and 5.2Ghz. It does not be similar to WRT1900ACSV2.
Linksys WRT1900ACSV2
Kernel: Linux 4.9.82-rc1 #103 SMP PREEMPT Sat Feb 17 02:15:39 CET 2018 armv7l
Mode/Status: Automatic
Reset: No
Issues/Errors:
1. USB Printer Support Signal is not stable.
2. Samba Server: The memory cannot release when the upload and download process had completed unless the harddisk is removal by SES Button. It is slow down the router performance.
3. The removal of usb or e-sata do not have button for harddrive removal. It needs to use command. It is very inconvenience.
4. WeMO Switch does not support to connect all dd-wrt router unless CFE loader dd-wrt information was changed.
5. Instagram app in Android was limited. It load the picture very slow unless VPN is connected.
6. Radio Scheduling is not functioning.
Router/Version: Linksys E3000
Firmware: DD-WRT v3.0-r35244 mega (03/05/1
Kernel: Linux 3.10.108-dd #17976 Mon Mar 5 14:32:56 CET 2018 mips
Previous: DD-WRT v3.0-r35034 mega (02/17/1
Mode/Status: Router/AP
Setup: ddns/ Multiple Virtula interface
Reset: No
Issues/Errors: None so far
Posted: Tue Mar 06, 2018 12:08 Post subject: Asus RT-N18U
Router/Version: Asus RT-N18U
Firmware: DD-WRT v3.0-r35244 std (03/05/18 )
Kernel: Linux 4.4.120 #2689 Mon Mar 5 08:28:11 CET 2018 armv7l
Previous: r34080
Mode/Status: Gateway/working
Reset: No
Issues/Errors: Yes
1) Now addition to "Authentication fail" after every successful WebUI login in Syslog, this error is generated as well.
Mar 6 11:49:52 Gateway daemon.err httpd[1131]: Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
Mar 6 11:49:57 Gateway daemon.err httpd[1131]: Request Error Code 404: File not found.
2) Time in Syslog is wrong. It ignores Time Zone setting and seems default to UTC instead.