Posted: Fri Feb 23, 2018 7:23 Post subject: Need help for RT-N12C1 bricked
Hi
I have RT-N12C1 totaly bricked after a fail update to dd-wrt.Right now i loose totaly acess to the router , no ip , no cfe , all led light on and nothing appends.
The router no boot anymore. I try to plug Jtag serial , nothing happends too.
I think the CFE or NVRAM are maybe corrupted.
Please let me know if someone have a solution.
Cannot send TFTP too because the router no have any ip.
Smaller picture please. If you aren't getting any output from serial and are sure you have set it up correctly, then most likely it's trash. _________________ I am far from a guru, I'm barely a novice.
Posted: Fri Feb 23, 2018 16:15 Post subject: Re: Need help for RT-N12C1 bricked
firewall1 wrote:
I have RT-N12C1 totaly bricked after a fail update to dd-wrt.Right now i loose totaly acess to the router , no ip , no cfe , all led light on and nothing appends.
The router no boot anymore. I try to plug Jtag serial , nothing happends too.
I think the CFE or NVRAM are maybe corrupted.
What exactly did you do to brick it, and what exactly did you do to try fixing it so far? I.e. what guide are you following, etc. JTAG and serial are two different methods. _________________ #NAT/SFE/CTF: limited speed w/ DD#Repeater issues#DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo#
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
I try to reset,i try 30/30/30 , i try TFTP, ssh , telnet , i try to plug CP2102 USB-Serial Converter Type-A to the serial nothing too.
All led light on and no more.