New Build - 12/14/2017 - r34080

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware
Goto page Previous  1, 2, 3, 4, 5, 6  Next
Author Message
Mile-Lile
DD-WRT Guru


Joined: 24 Feb 2013
Posts: 1521
Location: Belgrade

PostPosted: Sat Dec 16, 2017 8:37    Post subject: Reply with quote
Router Model GL.iNet-AR150
Firmware Version DD-WRT v3.0-r34080 std (12/14/17)
Kernel Version Linux 3.18.87 #3714

working: yes
reset: no
errors: none

Thx BS and ddwrt dev team!
Sponsor
h8red
DD-WRT Guru


Joined: 28 Jun 2011
Posts: 580
Location: Vilnius, Lithuania

PostPosted: Sat Dec 16, 2017 14:25    Post subject: Reply with quote
Router: TP-Link TL-WR842ND v2
Kernel: 3.10.108 #44782
Status: OK
Reset: no
Errors: no

Web upgrade from previous public beta

_________________
[Ramips] Nexx WT3020F Openwrt @kernel #4.14.167 (OpenVPN server, Wireguard server, AD blocking, SQM QOS, USB)
Linwood
DD-WRT Novice


Joined: 09 Jun 2012
Posts: 37

PostPosted: Sat Dec 16, 2017 15:12    Post subject: Re: New Build - 12/14/2017 - r34080 - good on WNDR3800 Reply with quote
Router Model: WNDR3800

Status: OK
Reset: Yes (30-30-30, coming from 30342)
Errors: Maybe

I flashed two of these, one in a wired repeater mode, and also added a couple new subnets for a project. Exercised them fairly well in 2g and 5g bands, and all looked good. Except.

3-4 times during this, after making a change (to some aspect of bridging or routing, different each time) they failed to respond afterwards to either telnet or http, but continued passing data. A reboot showed the change having taken, and all was well after the reboot. Note these 3-4 times were in dozens, maybe 100 changes I was making, so not major nor consistent.

Question: I always do a reset based on guidance from years ago, but is there general recommendation now when it is needed? As my configs get more complex it is harder and harder to install new firmware and also reset.
KuroiTsuki
DD-WRT Novice


Joined: 10 May 2017
Posts: 25

PostPosted: Sat Dec 16, 2017 15:38    Post subject: Reply with quote
Router: Archer C7 v2
Errors: None so far
5Mgz Wi-Fi now works
Grindmetal
DD-WRT Novice


Joined: 27 Jan 2017
Posts: 13

PostPosted: Sat Dec 16, 2017 17:40    Post subject: Reply with quote
Firmware tooBig Sad
WHR HP G300 N

_________________
Buffalo WHR-HP-G300N_Japanese Version
Firmware:DD-WRT v3.0-r32170 std (06/01/17)
bRick57720
DD-WRT Novice


Joined: 16 Dec 2017
Posts: 1

PostPosted: Sat Dec 16, 2017 23:04    Post subject: Reply with quote
Router Model: TP-Link WDR4300v1
Status: OK
Reset: Yes (30-30-30, coming from 22118)
Errors: None so far (2.4 and 5GHz working)
Psyxroid
DD-WRT User


Joined: 24 Jan 2016
Posts: 130
Location: Midwest, US

PostPosted: Sun Dec 17, 2017 17:21    Post subject: Reply with quote
Router: Buffalo WZR-600DHP
Firmware: 34080 std (12/14/17)
Kernel: 3.10.108
Status: OK
Reset: No
Errors: None
Uptime: 1 day, 16:42
Webui upgrade from 33986

Works fine so far. Speed test results all over the place, could be my ISP though ...

_________________
Buffalo WZR‑600DHP (WZR-HP-AG300H)
abxxx
DD-WRT Novice


Joined: 15 Dec 2017
Posts: 4

PostPosted: Sun Dec 17, 2017 20:41    Post subject: I can not upgrade/downgrade to any version Reply with quote
As I wrote a few posts before, I still can not upgrade/downgrade to any version. Webrevert does not work, Factory to ddwrt neither.
I tried 30x. I can see from any firmware after flash/reboot still r34080.

Please, could somebody hlep me with this problem? I would like to revert back to r25179 which fits me well.

TPlink TL-WR1043ND v1

Thank you
05dyna
DD-WRT Guru


Joined: 25 Jan 2008
Posts: 934

PostPosted: Sun Dec 17, 2017 21:38    Post subject: Re: I can not upgrade/downgrade to any version Reply with quote
abxxx wrote:
As I wrote a few posts before, I still can not upgrade/downgrade to any version. Webrevert does not work, Factory to ddwrt neither.
I tried 30x. I can see from any firmware after flash/reboot still r34080.

Please, could somebody hlep me with this problem? I would like to revert back to r25179 which fits me well.

TPlink TL-WR1043ND v1

Thank you



I don’t know nor have I tried this but maybe give something like the method in the link below a try. This video is for the v3 but hopefully someone savvier than I could confirm if this method will work for your v1. If so then you could back to factory stock then you could start over with your old build’s factory-to-ddwrt.bin file

https://www.youtube.com/watch?v=SYOKO1vC_-k


also take a look here:

https://www.dd-wrt.com/phpBB2/viewtopic.php?t=311642&postdays=0&postorder=asc&start=0
abxxx
DD-WRT Novice


Joined: 15 Dec 2017
Posts: 4

PostPosted: Sun Dec 17, 2017 22:51    Post subject: Reply with quote
Thank you for your reply.
If someone confirm, that this is safe, I will do it.
I have v1 and it could be different. I do not want to damage my device...

Any another idea?


Thank you
pigtail
DD-WRT Novice


Joined: 26 Oct 2015
Posts: 22

PostPosted: Mon Dec 18, 2017 1:10    Post subject: Reply with quote
Router/Version: Netgear WNDR3700v2
Firmware: 34080
Previous: 33679
Mode/Status: WiFi Hotspot
Reset: No
Issues/Errors: None, so far.

Router/Version: Linksys E4200 V1 (Ya, i know it's Broadcom)
Firmware: 34080
Previous: 33679
Mode/Status: Casecase WiFi hotspot thru wire
Reset: No
Issues/Errors: None, so far.

Thanks for the wonderful work and Merry Christmas.
gegemon2012
DD-WRT Novice


Joined: 29 Oct 2017
Posts: 7

PostPosted: Mon Dec 18, 2017 11:44    Post subject: Reply with quote
Router Model: TP-Link TL-WR1043ND v1.0

Status: dont upgrade from 12-04-2017-r33986
Reset: no
Errors: bad firmware...

I recently stitched after a failed attempt to flash my dead router with firmware r33525. Spent 1.5 hours of time in search of adequate instructions and was able to update to 12-04-2017-r33986. And now I again can not flash via web interface router from 12-04-2017-r33986 to 12-14-2017-r34080... Write here when there will be firmware which will be stitched through the web interface. Write the full instructions for the firmware via SSH (telnet, putty) or give a link if these instructions are available on this forum.

P.S. on 12-04-2017-r33986 dont work snmp...


Last edited by gegemon2012 on Mon Dec 18, 2017 12:31; edited 1 time in total
gegemon2012
DD-WRT Novice


Joined: 29 Oct 2017
Posts: 7

PostPosted: Mon Dec 18, 2017 11:51    Post subject: Reply with quote
abxxx wrote:
Hello,

I tried to upgrade my TPlink WR1043ND v1 by this version.
When I want to revert back to the older version, it is not possible. I did it 10 times without any successful.
Do I have only I the problem or there are more users with the same problem?

I would like to revert back to the r25179

Thank you


https://www.dd-wrt.com/phpBB2/viewtopic.php?t=312688
lenny88
DD-WRT User


Joined: 03 Apr 2017
Posts: 56

PostPosted: Mon Dec 18, 2017 11:59    Post subject: Reply with quote
Router/Version: Buffalo wzr-1166dhp
Firmware: 34080
Previous: 22700
Mode/Status: WiFi Hotspot
Reset: Yes
Issues/Errors: No resetbutton, no LED Flashing
Wildlion
DD-WRT Guru


Joined: 24 May 2016
Posts: 1042

PostPosted: Mon Dec 18, 2017 17:06    Post subject: Reply with quote
Router: DIR-615e3
Firmware: dir615e3-firmware.bin (v3.0-r34080 std)
Kernel: Linux 3.10.108 #44742 Thu Dec 14 09:40:52 CET 2017 mips
Status: Buggy on gui
Reset: No
Notes on configuration:

    DNSMasq
    Virtual wireless with bridging x2
    multiple DHCP server
    QOS

Errors:

    1. Apply settings on multiple pages does not work (for example Setup->Basic Setup, Setup->Network and Security->Firewall)
    2. Firmware upgrade button does not work (I have had to use command line to upgrade/downgrade)
    3. Factory Defaults (reset) does not work (apparently broken after 33006)
    4. Firmware restore button broken (apparently broken after 33006)
    5. Switch ports can not communicate with each other (see post https://www.dd-wrt.com/phpBB2/viewtopic.php?t=312371 )




Router: DIR-825 rev B1
Firmware: dir825-firmware.bin (v3.0-r34080 std)
Kernel: Linux 3.10.108 #44724 Thu Dec 14 09:06:56 CET 2017 mips
Status: Working
Reset: No
Notes on configuration:

    Media Network
    DNSMasq
    Port Forwarding

Errors:


    None
Goto page Previous  1, 2, 3, 4, 5, 6  Next Display posts from previous:    Page 2 of 6
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum