D-Link DIR-882 A1 AC2600

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Ralink SoC based Hardware
Goto page Previous  1, 2, 3, ... 9, 10, 11  Next
Author Message
Gazooo
DD-WRT Novice


Joined: 31 Mar 2015
Posts: 27

PostPosted: Sun Oct 29, 2017 10:18    Post subject: Re: Work fine for me Reply with quote
casualtester wrote:
Gazooo wrote:
... I'm super happy.


Thanks for the feedback Gazooo.

So no finicky settings or LEDs not functioning?



The 5GHz has decent wireless? I ask since the Archer C7 really has pathetic *range with the 5 GHz.
*Compared to Netgear R7000 with XWRT-Vortex firmware.

To install dd-wrt,
Did you just upgrade with factory-to-ddwrt.bin firmware using a web browser?


1. I haven't looked at the LEDs so I don't know.
2. Wireless for both 2.4 and 5GHz is way better than my Linksys WRT1900AC. I have a great connection to 5G over 63 feet away to my garage TV.
3. Just flash using factory-to-ddwrt.bin.
Sponsor
casualtester
DD-WRT User


Joined: 13 Dec 2015
Posts: 260

PostPosted: Mon Oct 30, 2017 6:04    Post subject: Reply with quote
Thanks again Gazooo.
grizzly993
DD-WRT Novice


Joined: 05 Dec 2015
Posts: 4

PostPosted: Thu Nov 23, 2017 20:30    Post subject: 5 GHz virtual WLAN Reply with quote
5 GHz virtual W-LAN interfaces ba1-... don't get any HW-Adress, still stays 00:00:00:00:00:00 and the interface ba1 is not shown in the networking tab. Any ideas or still a bug from the 5 GHz error? using r33772. Thanks.
Friko
DD-WRT Novice


Joined: 14 Dec 2014
Posts: 13

PostPosted: Sat Jan 27, 2018 13:35    Post subject: Reply with quote
Is anyone having issues with this router on DD-WRT v3.0-r32693 std (07/14/17)?

I've been getting random crashes. It's getting quite frequent lately.
casualtester
DD-WRT User


Joined: 13 Dec 2015
Posts: 260

PostPosted: Sat Jan 27, 2018 14:42    Post subject: Reply with quote
Friko wrote:
Is anyone having issues with this router on DD-WRT v3.0-r32693 std (07/14/17)?


That firmware is quite old.

I run 12-29-2017-r34311 at the moment.
Encountered an unexpected reboot a few days ago but after tracking it, no reboots after 3.5 days. During that time, hammered it with hours of peer to peer traffic to stress the router and no hiccups. Maybe a fluke in my case...

Haven't bothered with the more recent 2018 versions as of yet.
Friko
DD-WRT Novice


Joined: 14 Dec 2014
Posts: 13

PostPosted: Sat Jan 27, 2018 15:05    Post subject: Reply with quote
casualtester wrote:
Friko wrote:
Is anyone having issues with this router on DD-WRT v3.0-r32693 std (07/14/17)?


That firmware is quite old.

I run 12-29-2017-r34311 at the moment.
Encountered an unexpected reboot a few days ago but after tracking it, no reboots after 3.5 days. During that time, hammered it with hours of peer to peer traffic to stress the router and no hiccups. Maybe a fluke in my case...

Haven't bothered with the more recent 2018 versions as of yet.


Thanks. I didn't know there was a new FW for it. Can you point me to the download link?
casualtester
DD-WRT User


Joined: 13 Dec 2015
Posts: 260

PostPosted: Sat Jan 27, 2018 16:33    Post subject: Reply with quote
Friko wrote:
Thanks. I didn't know there was a new FW for it. Can you point me to the download link?


You can grab the builds from dd-wrt ftp server: betas

You can decide as to which build you wish to try.
Friko
DD-WRT Novice


Joined: 14 Dec 2014
Posts: 13

PostPosted: Sat Jan 27, 2018 17:23    Post subject: Reply with quote
casualtester wrote:
Friko wrote:
Thanks. I didn't know there was a new FW for it. Can you point me to the download link?


You can grab the builds from dd-wrt ftp server: betas

You can decide as to which build you wish to try.


Thanks a bunch. Didn't know about the FTP site
ManHammer
DD-WRT Novice


Joined: 02 Feb 2018
Posts: 3

PostPosted: Fri Feb 02, 2018 7:51    Post subject: Reply with quote
Hi,
anybody experienced issues with PPPoE on this one? I have upgraded to the beta from 30.1. Everything is working smooth, but when i enter my provider credentials and switch to PPPoE i get the system unresponsive for ~30sec and no connection. The logs are not telling anything useful. Maybe i need to do a proper reset because i have some stock data leftovers. Is the 30/30/30 method working for this architecture as well?
casualtester
DD-WRT User


Joined: 13 Dec 2015
Posts: 260

PostPosted: Fri Feb 02, 2018 10:12    Post subject: Reply with quote
ManHammer wrote:
... Is the 30/30/30 method working for this architecture as well?


From the various comments posted around, hardware reset varies depending on the router so I just gave up and reset via command line using telnet.

NB: The current firmware listed for the DIR-882 is 01-31-2018-r34777
ManHammer
DD-WRT Novice


Joined: 02 Feb 2018
Posts: 3

PostPosted: Fri Feb 02, 2018 20:37    Post subject: Reply with quote
Hi i tried all the latest FW, but still no luck. I tried to get more information out of it but failed. I see a crash if i try to redial via telnet.

Any ideas how to investigate? Is there any log with more information available.
casualtester
DD-WRT User


Joined: 13 Dec 2015
Posts: 260

PostPosted: Fri Feb 02, 2018 21:10    Post subject: Reply with quote
Reset the router via telnet after update.
casualtester
DD-WRT User


Joined: 13 Dec 2015
Posts: 260

PostPosted: Fri Feb 02, 2018 21:13    Post subject: Reply with quote
ManHammer wrote:
... the system unresponsive for ~30sec and no connection...


Depending on configuration changes, the router can take anywhere from 30 seconds to 90 seconds, to apply a change.
dwotherspoon
DD-WRT Novice


Joined: 02 Jan 2018
Posts: 1

PostPosted: Thu Feb 08, 2018 15:58    Post subject: Reply with quote
I'm having issues getting my HDHomeRun working with my router so I'm wondering if maybe a firmware update might help. Just wanted to double check, are the instructions for upgrading this router the same as in the peacock thread (which is for broadcom routers)?

The proper process for flashing when upgrading EXISTING dd-wrt firmware is:

a.Set your computer to a static IP of 192.168.1.8. (or to whatever subnet the router is on) Disable all firewalls and security. Disable wireless on your computer and only have the router connected to the flashing computer by the ethernet cable between the two.
b. Hard reset prior to flashing. Wait. Check for password page on re-login and change password.
c. Flash firmware. You should use the dd-wrt webgui upgrade page except if you have a belkin router. (For belkin use tftp.exe to flash)
d. Wait...at least three minutes. Lights should return to normal. See important2, below. Failing to wait is how most people brick their routers.
e. Do a power cycle of the router. (Unplug the cord, count to 30 and plug it back in.)
f. Wait for the lights to return to normal usually about 2 minutes.
g. HARD reset again. Wait. Check for the password page and set the password. Then you can reconfigure your settings manually.
h. Once configured set your computer back to autoIP and autoDNS.
casualtester
DD-WRT User


Joined: 13 Dec 2015
Posts: 260

PostPosted: Fri Feb 09, 2018 2:51    Post subject: Reply with quote
dwotherspoon wrote:
... instructions for upgrading this router ...


Instructions for the DIR-878, which is similar to DIR-882.
You can take a look at post #34 at the following: LINK
Goto page Previous  1, 2, 3, ... 9, 10, 11  Next Display posts from previous:    Page 2 of 11
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Ralink SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum