Any suggestion for installation on R7000 on Tomato Shibby
Tried DD WRT / OpenWRT / Linksys => nothing works
Issues on symblink
Issues on directory missing
Blank Page
Many thanks.
SR
How have you formatted your USB drive? FAT32 does not support symlinks.
What sorts of problems are you having? Need more details
3. Make sure that `yamon2.sh`, `yamon.startup`, and `yamon.shutdown` (and any other *sh files) all have execute permissions
Anyway, all folders seem to have uploaded with 755 (drwxr-xr-x) with all files being 644 (-rw-r--r--).
What should these be set as to allow the most minimal / requred of permissions ?
This is my first install. After this parts resolved, I guess I can continue to step 6 in the readme as for the initial install it is stated to ignore steps 4 & 5.
3. Make sure that `yamon2.sh`, `yamon.startup`, and `yamon.shutdown` (and any other *sh files) all have execute permissions
Anyway, all folders seem to have uploaded with 755 (drwxr-xr-x) with all files being 644 (-rw-r--r--).
What should these be set as to allow the most minimal / requred of permissions ?
This is my first install. After this parts resolved, I guess I can continue to step 6 in the readme as for the initial install it is stated to ignore steps 4 & 5.
Ty.
Ty - pls use YAMon3... The install script will walk you through the process. And will prompt for the permissions. All *.sh files require execute permissions
3. Make sure that `yamon2.sh`, `yamon.startup`, and `yamon.shutdown` (and any other *sh files) all have execute permissions
Anyway, all folders seem to have uploaded with 755 (drwxr-xr-x) with all files being 644 (-rw-r--r--).
What should these be set as to allow the most minimal / requred of permissions ?
This is my first install. After this parts resolved, I guess I can continue to step 6 in the readme as for the initial install it is stated to ignore steps 4 & 5.
Ty.
Ty - pls use YAMon3... The install script will walk you through the process. And will prompt for the permissions. All *.sh files require execute permissions
So for the time being since nothings been done with Yamon2 really. All I should need to do to "remove" it is delete what I uploaded to the mounted USB drive attached to /opt right ?
_dbkey='' # if not null, this option will sync settings across all of your devices...
Can I assume this is where the "key" obtained from Database Integration goes ?
It seems the answer is clear but not really specified as this is all there is in the settings tab regarding it.
Code:
Copy the string from the field above, paste it into `config.file` on your router, and then run the command `/opt/YAMon3/restart.sh` on your router. Once you have done this, all of your devices will share the same YAMon settings.
Other than the answer from the previous post which I assume is yes and the answer to this new query. Y3 seems to be running fine aside from a curiosity I will ask after receiving the two answers currently in front of you.
So for the time being since nothings been done with Yamon2 really. All I should need to do to "remove" it is delete what I uploaded to the mounted USB drive attached to /opt right ?
Ty.
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=289324 _________________ Segment 1 XR700 10Gb LAN, 1Gb WAN ISP BS
Wired AP 1 Unifi Wifi 6 LR US 1Gb LAN
Wired AP 2 Unifi Wifi 6 LR US 1Gb LAN
Wired AP 3 Unifi Wifi 6 LR US 1Gb LAN
Syslog Services Asustor 7110T NAS 10GB
NetGear XS716T 10GB Switch
download1.dd-wrt.com/dd-wrtv2/downloads/betas/ (Brain Slayer)
YAMon https://usage-monitoring.com/index.php
My Yamon3 setup seems to be "off" since I did a factory reset and added a newer FW.
Should I redo the install process or something ?
Yes that is probably what you need. The factory reset likely clear NVRAM and removed your startup script...
Running install.sh again will reconfigure things properly (I hope!)
Al
That's just it though. I made not of and replace the start/stop scripts. So curious what a fac reset might have done to Yamon that might be worth noting for future users.
Also, are Yamon files found anywhere other than /opt which is my mounted USB drive ?
I ask because I noticed grouping was still there as well as some weird user stuff even after wiping the USB yamon folder do do a "fresh" install.
Thank you _________________ Segment 1 XR700 10Gb LAN, 1Gb WAN ISP BS
Wired AP 1 Unifi Wifi 6 LR US 1Gb LAN
Wired AP 2 Unifi Wifi 6 LR US 1Gb LAN
Wired AP 3 Unifi Wifi 6 LR US 1Gb LAN
Syslog Services Asustor 7110T NAS 10GB
NetGear XS716T 10GB Switch
download1.dd-wrt.com/dd-wrtv2/downloads/betas/ (Brain Slayer)
YAMon https://usage-monitoring.com/index.php
Hi, I'm new with YAMon, just installed it the other day and had no issues during installation.
However after a few days of use I have one day that has a difference of 6.0GB between local traffic and measured at router. My local traffic says 5.4MB while Measured@Router says 6.0GB
I haven't done any local file transfers, so why would there be such a big discrepancy?
Hi, I'm new with YAMon, just installed it the other day and had no issues during installation.
However after a few days of use I have one day that has a difference of 6.0GB between local traffic and measured at router. My local traffic says 5.4MB while Measured@Router says 6.0GB
I haven't done any local file transfers, so why would there be such a big discrepancy?
Posted: Mon Oct 09, 2017 22:58 Post subject: Notification
Hi all, sorry I have not read all 100+ threads, but I did read the website and dont think I saw anything mentioned about sending a notification when I will reach my cap, is this a capability. I would like a notification via email etc on a set limit.
Posted: Tue Oct 10, 2017 2:41 Post subject: Re: Notification
DiRTDOG wrote:
Hi all, sorry I have not read all 100+ threads, but I did read the website and dont think I saw anything mentioned about sending a notification when I will reach my cap, is this a capability. I would like a notification via email etc on a set limit.