Tickets closed as 'fixed':
#5936 (Netgear 3700 v3 Will not update to r33180) closed by flood404
Issues, observations, and/or workarounds reported:
-K3X builds are smaller than 33180, but still bigger than 33006; k2.4 builds are smaller now
1. (jwh7) K26 is still missing big, mega & openvpn builds (mini builds' size is still same incl. since 33006)
2. (egc) [from prior builds] Policy-Based Routing doesn't work with SFE enabled.
http://svn.dd-wrt.com/ticket/5900 3. (egc) [from prior builds] "OpenVPN 2.4 is stable but you have to tweak your configuration files notably:"
mtu-disc yes
proto udp4
WARNING:This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build (e.g. 29000_NEWD-2_K2.6_mega-nv64k.bin). Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. Please also do not respond to such questions. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless. If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build. _________________ #NAT/SFE/CTF: limited speed w/ DD#Repeater issues#DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo#
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
Last edited by jwh7 on Sat Aug 26, 2017 23:49; edited 2 times in total
This build is mostly working fine, with minor issues carried over from older builds:
Router/Version: Linksys E3000 Firmware: dd-wrt.v24-33215_NEWD-2_K3.x_mega-e3000, DD-WRT v3.0-r33215M mega (08/25/17) Issues/Errors:
Is the M at the end significant?
On Basic Setup page, the help file ends abruptly in help/HSetup.asp:
Code:
<script type="text/javascript">Capture(hidx.page21)</script><dt><script type="text/javascript">Capture(idx.legend3)</script></dt><!--dd>Select the time zone for your location, or desired location.</dd><dd>Check all values and click <i>Save Settings</i> to save your settings. Click <i>Cancel Changes</i> to cancel your unsaved changes. You can test the settings by connecting to th
It ends there, in the middle of a word, which doesn't matter anyway because the browser sees the text as a comment, so the page ends with the title "Time Settings" with no text under it. It would be nice to see a word or two there about STP and the new toy, Shortcut FE.
"CPU Features," the label, was shown as "undefined" for a while (the feature list was there anyway) after flashing, but I can no longer reproduce it, not without re-flashing.
WDS icon (in WiViz) is still missing. Strange, what is stopping BS/K/whomever from including the/an image?
Joined: 18 Jul 2017 Posts: 45 Location: Wisconsin, USA
Posted: Fri Aug 25, 2017 20:54 Post subject:
Router/Version: Linksys EA 6500v1
Firmware: DD-WRT v3.0-r33215M giga (08/25/17)
Kernel: Linux 3.10.107 #15778 Fri Aug 25 11:42:58 CEST 2017 mips
Previous: DD-WRT v3.0-r33006 giga (08/03/17)
Mode/Status: Gateway/AP
Reset: No
Issues/Errors: None So Far
Everything seems to be working normal. DDNS working, Port range forwards working properly, static leases working.
E2500
DD-WRT v3.0-r33215M mega (08/25/17)
Linux 3.10.107 #15794 Fri Aug 25 11:57:59 CEST 2017 mips
[dd-wrt.v24-33215_NEWD-2_K3.x_mega.bin]
Install over r33006
test router
Working ok
<--->
E1200v2
DD-WRT v3.0-r33215M mega (08/25/17)
Linux 3.10.107 #15794 Fri Aug 25 11:57:59 CEST 2017 mips
[dd-wrt.v24-33215_NEWD-2_K3.x_mega-nv64k.bin]
Install over r31899
test router
Working ok
Joined: 04 Jan 2007 Posts: 11564 Location: Wherever the wind blows- North America
Posted: Fri Aug 25, 2017 22:35 Post subject:
Router/Version: E3000
Firmware: DD-WRT v3.0-r33215M mega (08/25/17)
Kernel: Linux 3.10.107 #15794 Fri Aug 25 11:57:59 CEST 2017 mips
Mode/Status: CB/AP
Reset: No
Issues/Errors: Only NTP not working. Still have to manually set date/time.
This build of K3 just barely fits the 8M flash.
redhawk _________________ The only stupid question....is the unasked one.
WRT54Gv2.2
DD-WRT v3.0-r33215 mini (08/25/17)
Linux 2.4.37 #46428 Fri Aug 25 05:56:33 CEST 2017 mips
[dd-wrt.v24_mini_generic.bin]
Install over r33006
test router
Working ok
<----->
WRT54GSv2
DD-WRT v3.0-r33215 mega (08/25/17)
Linux 2.4.37 #46437 Fri Aug 25 06:05:32 CEST 2017 mips
[dd-wrt.v24_mega_generic.bin]
Install over r31899
takes a long dang time to install this using webif... but it worked.
test router
Working ok
<----->
WRT54GSv5
DD-WRT v3.0-r33215 micro (08/25/17)
Linux 2.4.37 #46442 Fri Aug 25 06:11:30 CEST 2017 mips
[dd-wrt.v24_micro_generic.bin]
Install over r31899
test router
Working ok
<----->
Also installed the micro on da WAP
anyone installing on a WAPv3 ~ 3.1 after you click the upgrade button just let it
cook for 5 - 7 minutes then you can yank the plug, wait 20 sec, and all should be good.
Two pieces of RT-N16 build 33006 big flashed to 33215 big. All ok.
One piece of E4200 build 33006 flashed with dd-wrt.v24-33215_NEWD-2_K3.x_mega-e3000.bin. All ok.
Four pieces of E3000 build 33006 flashed with dd-wrt.v24-33215_NEWD-2_K3.x_mega-e3000.bin. All ok. _________________ 2 times APU2 Opnsense 21.1 with Sensei
2 times RT-AC56U running DD-WRT 45493 (one as Gateway, the other as AP, both bridged with LAN cable)
3 times Asus RT-N16 shelved
E4200 V1 running freshtomato 2020.8 (bridged with LAN cable)
3 times Linksys WRT610N V2 converted to E3000 and 1 original E3000 running freshtomato 2020.8 (bridged with LAN cable)
Router/Version: Asus RT-AC66U
Firmware: DD-WRT v3.0-r33215M giga (08/25/17)
Kernel: Linux 3.10.107 #15778 Fri Aug 25 11:42:58 CEST 2017 mips
Previous: DD-WRT v3.0-r33006 giga (08/03/17)
Mode/Status: Router/AP (wl0 and wl1 both enabled NG-mixed w/ WPA2)
Reset: No
Issues/Errors: None So Far
Notes: WAN is disabled. This AP is connected back-2-back with a client bridge.
Router/Version: Asus RT-AC87U
Firmware: DD-WRT v3.0-r33215 std (08/25/17)
Kernel: Linux 4.4.83 #1930 SMP Fri Aug 25 07:57:51 CEST 2017 armv7
Previous: DD-WRT v3.0-r33006 std (08/03/17)
Mode/Status: Router/Client Bridge (wl0 enabled n-only network w/WPA2)
Reset: No
Issues/Errors: Route to the default gateway is not applied
Notes: For some reason the client bridge has no default route, thus router itself is unable to have connectivity with the internet. I have the gateway IP (192.168.2.1)configured in the setup tab, and it has worked for sometime this way, after this upgrade it stopped working as expected. Upon investigation there is no default route displayed in the route command. So I add it manually and then all router local services start working. I think I will try a full nvram erase ,reset and reprogram.
root@asus87u:~# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 br0
169.254.39.0 0.0.0.0 255.255.255.0 U 0 0 0 br0
192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 br0
root@asus87u:~# route add default gw 192.168.2.1
root@asus87u:~# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 br0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 br0
169.254.39.0 0.0.0.0 255.255.255.0 U 0 0 0 br0
192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 br0
Router/Version: Linksys WRT1900AC
Firmware: DD-WRT v3.0-r33215 std (08/25/17)
Kernel: Linux 4.9.44 #42 SMP Mon Aug 21 00:54:23 CEST 2017 armv7
Previous: DD-WRT v3.0-r33006 std (08/03/17)
Mode/Status: Gateway/AP (wl0 enabled NG-mixed w/ WPA2)
Reset: No
Issues/Errors: None So Far
Notes: The long range client bridge is reported on both sides as the signal has improved ~5-10% after the upgrade _________________ Location (urban) - 1x Linksys EA8500 (AP wlan0 & wlan1 enabled)
1x Asus 68u (Repeater Bridge w/VAP) - wl0 disabled
1x Asus 87u (Client Bridge) - wl1 disabled
E2500
Install remotely via ssh over r32170
static leases
local DNS
guest on wl0.1
DDNS
ovpn server
all seems good
dd-wrt.v24-33215_NEWD-2_K3.x_mega.bin is here:
http://mrjcd.com/test/r33215/33215mega.bin
if anyone wants to use it --- don't have to worry with renaming file
after you wget it before write. Just do a ls -la on tmp dir after wget
make sure it's all there. 33215mega.bin should be 7991296 bytes
Router/Version: E3000
Firmware: DD-WRT v3.0-r33215M mega (08/25/17)
Kernel: Linux 3.10.107 #15794 Fri Aug 25 11:57:59 CEST 2017 mips
Mode/Status: CB/AP
Reset: No
Issues/Errors: Only NTP not working. Still have to manually set date/time.