Tickets closed as 'fixed': Aug 3, 2017: #5412 (r29968+ too big for wrt160NL & e2100L ||| units w/ [->Oops: flash id ...) closed by mrjcd
#5832 (Need smaller builds for the rt-ac88u and rt-ac3100) closed by Jo Aug 2, 2017: #5904 (r32854+ Services page broken, qos dont work) closed by tatsuya46
#5707 (r31221 ttraff not recording any traffic) closed by tatsuya46
#5786 (pending htb fix) closed by tatsuya46
#5883 (qca nat patch broke qos downlink) closed by tatsuya46
#5869 (r32393 r7800 httpd randomly quits out of nowhere) closed by tatsuya46
#5889 (httpd not consistently refreshing) closed by tatsuya46
#5877 (all builds after r32170 have frequent httpd crashes) closed by tatsuya46
#5884 (since shortcut-fe patch r7800 gui is slow) closed by tatsuya46
Issues and/or workarounds reported: 1. (egc) Policy-Based Routing doesn't work with SFE enabled.
http://svn.dd-wrt.com/ticket/5900 2. (egc) "OpenVPN 2.4 is stable but you have to tweak your configuration files notably:
mtu-disc yes
proto udp4"
3. (jschenard) Bricks DIR-890L? (what about 885?) Reports 32868 works, and was able to revert back to it.
Possible workaround (?): try Kong AC_ARM_R8000 build.
4. (sierratango) Also bricks 868/880 (what about 860?)
Possible workaround (?): try Kong AC_ARM_STD build.
5. (mrjcd) Bricks micro build routers; don't use builds after 32170
6. (st1000) Wireless Radio Scheduling does not work
I saw this mentioned in the Kong thread too.
7. (Whammy) WNR3500L K3.X won't flash because the filesize is too big; 32868 K3.X build flashed fine
WARNING:This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build (e.g. 29000_NEWD-2_K2.6_mega-nv64k.bin). Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. Please also do not respond to such questions. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless. If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build. _________________ #NAT/SFE/CTF: limited speed w/ DD#Repeater issues#DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo#
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
Last edited by jwh7 on Thu Aug 24, 2017 14:32; edited 11 times in total
Joined: 18 Jul 2017 Posts: 45 Location: Wisconsin, USA
Posted: Thu Aug 03, 2017 15:51 Post subject:
Router: Linksys EA6500 V1
Firmware Version DD-WRT v3.0-r33006 giga (08/03/17)
Kernel: Linux 3.10.107 #15456 Thu Aug 3 11:56:31 CEST 2017 mips
Status: Working
Reset: No
Errors: None so far
Everything up and running stable so far. Service page confirmed working. GUI seems to respond nicely webpage hasn't refused connection yet since install. All port range forwards check out and working properly. Will continue to test.
Router: Netgear r7000
Firmware Version DD-WRT v3.0-r33006 giga (08/03/17)
Kernel: Linux 4.4.79 #1798 SMP Wed Aug 2 10:41:19 CEST 2017 armv7l
Status: Working
Reset: No
Errors: None so far
Router: Asus RT-N18U
Firmware: DD-WRT v3.0-r33006 std (08/03/17)
Kernel: Linux 4.4.79 #1802 Thu Aug 3 07:44:29 CEST 2017 armv7l
Status: Working
Reset: Yes (erase nvram)
Errors: None so far apart from usual misbehaving LEDs.
Router: Cisco Valet M10 v1 in client bridge mode
Firmware: dd-wrt.v24-33006_NEWD-2_K2.6_std_nokaid_small.bin
Reset: No
Errors: NTP fails to sync on startup. This used to work, but I can't provide a regression window. ntpclient syncs from telnet without issue.
Queueing Discipline is missing from QOS tab, but it looks like this is done on purpose for this particular router/configuration.
Router: Linksys E3000
Firmware: dd-wrt.v24-33006_NEWD-2_K3.x_mega-e3000.bin
Reset: No
Errors: WDS icon still missing from Wiviz.
E2500
DD-WRT v3.0-r33006 mega (08/03/17)
Linux 3.10.107 #15472 Thu Aug 3 12:11:03 CEST 2017 mips
[dd-wrt.v24-33006_NEWD-2_K3.x_mega.bin]
install over r32428 with bunch crap on it -- took a bit to clear all that
I'll mention this again concerning this box and K3.x --
root@E2500-TEST:~# nvram show | grep size
size: 32254 bytes (229890 left)
olsrd_pollsize=0.1
root@E2500-TEST:~# erase nvram
erase[65536]
root@E2500-TEST:~# reboot
when you have 256k nvram space but the CLI will only erase 64k it leaves a lot
of junk scattered all over the place. GUI reset gets most sometimes or doing both
usually clears it or a button reset 4 ~ 5 times.
QOS works good
ovpn server works good
Cloned WAN MAC works good
Did a backup / reset / restore and all that works ok ...well you always have to reinsert a cloned WAN MAC.
r33006 looks to be a good build
Should we be concerned that this build is 4MB smaller than other recent builds?
24.7MB vs 28.8MB for Netgear R7000 as an example.
He probably removed features as his build was too big for certain units and he does not create different configs for every model, some take larger images some smaller.
Previous Firmware: DD-WRT R32753 Linux 3.10.107 #15221
Firmware: DD-WRT v3.0-r33006 mega (08/03/17)
Kernel: Linux 3.10.107 #15472 Thu Aug 3 12:11:03 CEST 2017 mips
Status: Working
Reset: NO
Errors: None.
From Default Enabled Features...
-533Mhz OC
-2.4Ghz Radio: Wireless Client Mode
-5Ghz Radio: AP Mode with 2 SSIDs
-OpenVPN Client
-Enabled: SFE,SSH,SysLog,Proxy-DNSSEC
-VLANs:1,3 BRs:br0,br1
UPDATE 2016-Aug-09
-added another SSID, now 3 SSIDs on the 5Ghz Radio
-added another vlan & br, now VLANs:1,3,4 BRs:br0,br1.br2
-added DNSCrypt-Proxy 1.9.1
-enabled IPv6 6in4 via HE
-enabled USB for DNSCrypt files
-using default clock speed 480Mhz for now, OC may have caused
problems with added features
UPDATE 2016-Aug-11
-upgraded DNSCrypt-Proxy to 1.9.5 via Entware-ng (Thanks to James2k)
UPDATE 2016-Aug-16
-OCed 533Mhz
-Disabled IPv6 from HE (during double NAT, not possible for Hotel WAN Router to respond to HE Server during IP Update)
So far this configuration is working but will monitor. _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531
I got an E1500 at Goodwill for $3 today; VR cap tested fine, so...
Router/Version: Linksys E1500
Firmware: DD-WRT v3.0-r33006 mega (08/03/17)
Kernel: Linux 3.10.107 #15472 Thu Aug 3 12:11:03 CEST 2017 mips
Previous: dd-wrt.v24-21676_NEWD-2_K2.6_mini-e1500
Mode/Status: AP and CB tested
Reset: Yes, iterations of GUI and `erase nvram`
Issues/Errors: Wireless radio is always off, wireless settings only shows 'Auto' option for channel and 'Mixed' for mode.
The K3X wireless issues have been reported before.
Then...
Router/Version: Linksys E1500
Firmware: DD-WRT v3.0-r33006 mega (08/03/17)
Kernel: Linux 2.6.24.111 #32313 Thu Aug 3 03:14:52 CEST 2017 mips
Previous: dd-wrt.v24-21676_NEWD-2_K2.6_mini-e1500
Mode/Status: AP and CB tested
Reset: Yes, iterations of GUI and `erase nvram`
Issues/Errors: 1. Wireless channel wouldn't change from 1, until (skipping a lot of interim testing/mucking) I changed mode from 'Mixed' to 'NG-Mixed'. I don't recall ever seeing 'Mixed' on my WNDR's, but running fine as an AP @350MHz for almost 2 hours.
2. Running commands from the GUI comes up with a blank page; it worked fine from the K3X build
3. I see a lot of this kind of header on the webpages, first on a blank page, then at the top of the otherwise normal GUI:
HTTP/1.0 200 Ok Content-Type: text/html Server: httpd Date: Thu, 03 Aug 2017 23:00:34 GMT Connection: close Cache-Control: no-store, no-cache, must-revalidate Cache-Control: post-check=0, pre-check=0 Pragma: no-cache Cache-Control: no-cache Pragma: no-cache Expires: 0 _________________ #NAT/SFE/CTF: limited speed w/ DD#Repeater issues#DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo#
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
Posted: Fri Aug 04, 2017 6:59 Post subject: WRT610NV1 with r33006 *working*
Router/Version: Linksys WRT610N v1
Firmware: DD-WRT v3.0-r33006 mega (08/03/17)
Kernel: Linux 2.4.37 #46181 Thu Aug 3 06:34:59 CEST 2017 mips
Previous: r32170
Mode/Status: Working
Reset: No
Issues/Errors: Nothing relevant, at the moment
Finally this release WORKS again with Linksys WRT610Nv1.
Thank you for your work and correct previous release problems.
Regards.
Router/Version: Linksys EA6500v1
Firmware: DD-WRT v3.0-r33006 giga (08/03/17)
Kernel: Linux 3.10.107 #15456 Thu Aug 3 11:56:31 CEST 2017 mips
Mode/Status: Working
Reset: Yes (30-30-30)
Issues/Errors: Policy based routing in the OpenVPN Client does not seem to work anymore - results in ICMP errors on listed host(s)
I appreciate the quick release of this version that fixed the Services page
Joined: 09 Nov 2014 Posts: 314 Location: Bakersfield, CA
Posted: Fri Aug 04, 2017 14:46 Post subject:
Router/Version: 2x Linksys E3000
Firmware: dd-wrt.v24-33006_NEWD-2_K3.x_mega-e3000.bin
Kernel: Linux 3.10.107 #15472 Thu Aug 3 12:11:03 CEST 2017 mips
Previous: dd-wrt.v24-32170_NEWD-2_K3.x_mega-e3000.bin
Mode/Status: Client Bridges
Reset: No
Issues/Errors: None thus far, seems like a pretty solid build. Fast page loading it seems. Thanks for your work, devs!
Router/Version: Trendnet TEW811DRU
Firmware: DD-WRT v3.0-r33006 mini (08/03/17)
Kernel: Linux 4.4.79 #1801 Thu Aug 3 07:41:58 CEST 2017 armv7l
Previous: DD-WRT v3.0-r32170 mini (06/01/17)
Mode/Status: AC-only client bridge
Reset: No
Issues/Errors: None so far, will report back if any problems arise. _________________ Deployed Routers:
Netgear R7800 - 1x build 46979
- Gateway (USB /w Entware, CAKE QoS)
Netgear R7000 - 3x build 46979
Router Name: ea6500
Router Model: Linksys EA6500
Firmware: DD-WRT v3.0-r33006 giga (08/03/17)
Kernel: Linux 3.10.107 #15456 Thu Aug 3 11:56:31 CEST 2017 mips
Previous: DD-WRT v3.0-r32170 giga (06/01/17)
Reset: GUI reset before Flash
Services: Client Bridge
Errors: None so far
Router Name: e3000
Router Model: Linksys E3000
Firmware: DD-WRT v3.0-r33006 mega (08/03/17)
Kernel: Linux 3.10.107 #15472 Thu Aug 3 12:11:03 CEST 2017 mips
Previous: DD-WRT v3.0-r31924 mega (05/02/17)
Reset: GUI reset before Flash
Services: Client Bridge
Errors: None so far
Router Name: ea6400
Router Model: Asus RT-AC68U
Firmware: DD-WRT v3.0-r33006 std (08/03/17)
Kernel: Linux 4.4.79 #1798 SMP Wed Aug 2 10:41:19 CEST 2017 armv7l
Previous: DD-WRT v3.0-r30631 std (09/14/16)
Reset: GUI reset before Flash
Services: AP / OpenVPN Client
Errors: Reports Asus RT-AC68U when VPN active. Unable to establish vPN connection.
Reverting to r30631, last build able to make stable VPN connection.
