Router: DLink Dir-300
Firmware: DD-WRT v3.0-r32170 (06/01/17)
Kernel: 3.2.88 #123933 Thu Jun 1 08:36:52 CEST 2017 mips DD-WRT
Status: Not OK
Reset: No
Errors: WebIF broken
Edit: seems to be a problem since a long time (on DIR-300 rev A) - I tried various 2017 and late 2016 builds with no avail.
Now back to r29837 from 06.06.2016 and WebIF is working fine.
Posted: Sat Jun 17, 2017 12:22 Post subject: Router Upgrade
Router: See signature
Kernel: various
Status: OK
Reset: No
Errors: TP-Link Archer C7 v2 wifi unstable, particularly on the 5GHz band. I disabled the 5GHz interface and the 2.4GHz band becomes stable. _________________ Before asking a question on the forums, update dd-wrt: Where do I download firmware? I suggest reading it all.
QCA Best WiFi Settings
Some dd-wrt wiki pages are up to date, others are not. PM me if you find an old one.
Atheros:
Netgear R7800 x3 - WDS AP / station, gateway, QoS
TP-Link Archer C7 v2 x2 - WDS Station
TP-Link TL-WDR3600 v1 - WDS Station
TP-Link 841nd v8 - NU
D-Link 615 C1/E3/I1 x 7 - 1 WDS station
D-Link 825 B1 - NU
D-Link 862L A1 x2 - WDS Station
Netgear WNDR3700v2 - NU
UBNT loco M2 x2 - airOS
Broadcom
Linksys EA6400 - Gateway, QoS
Asus N66U - AP
Netgear WNDR3700v3 - not used
MediaTek
UBNT EdgeRouter X - switch
Last edited by ian5142 on Fri Jun 30, 2017 2:28; edited 1 time in total
Router Model: TP-Link WR940Nv3 (international version)
Firmware Version: DD-WRT 06-01-2017-r32170
Web upgrade: OK
Reset: No.
Status: Bad, Unusable
Errors: Same as before, this build still has the WAN port & LED issues.
Router: Buffalo WZR-HP-AG300H
Firmware: DD-WRT v3.0-r32170 std (06/01/17)
Kernel: Linux 3.10.105 #32440 Thu Jun 1 02:22:21 CEST 2017 mips
Status: broken (OSPF Router with firewall)
Reset: first flash without reset, 2nd with reset
Errors:
When changing router operation mode from Gateway to any other mode (tested with Router and OSPF Router) the statefull packet inspection doesn't work anymore. The rules in /tmp/.ipt don't get applied in the filter table either. Only some rules in mangle and nat table are applied. If I run my custom fw script I get locked out. Only udp traffic is possible to and from the unit(snmp get still works). TCP and ICMP are not possbile to the unit. Looking at /proc/net/nf_conntrack every flow is flagged [UNREPLIED] but traffic flows work as long as there is no drop rule at the end of any chain in the filter table.
Staying in gateway mode and using my firewall works normal. Even if I bring up watchquagga, zabra and ospfd with a custom startup script.
Router Model: Netgear r700
Firmware Version: DD-WRT 06-01-2017-r32170
Web upgrade: OK
Reset: No.
Status: Inconclusive
Errors: DNSMasq stopped to provide static lease for the server. 5G WiFi non existent. (Not even showing in status), not detected or connectable by any device. Tried all the modes and combination.
Router: TPLINK TL-WDR3600 v1
Firmware: DD-WRT v3.0-r32170 std (06/01/17)
Kernel: Linux 3.10.105 #32456 Thu Jun 1 03:06:02 CEST 2017 mips
Status: Fine
Reset: No
Errors: libc for Optware can't be installed
Code:
# ipkg -d / install libc_0.9.33.2-1_ar71xx.ipk
ERROR: File not found: //usr/local/lib/ipkg/lists/barrier_breaker
You probably want to run `ipkg update'
ipkg_install_file: ERROR unpacking control.tar.gz from libc_0.9.33.2-1_ar71xx.ipk
Router: DIR-615e3
Firmware: dir615e3-firmware.bin (v3.0-r32170 std)
Kernel: Linux 3.10.105 #32472 Thu Jun 1 03:23:33 CEST 2017 mips
Status: Working
Reset: No
Notes on configuration:
DNSMasq
Virtual wireless with bridging x2
multiple DHCP server
QOS
Errors:
None
Router: DIR-825 rev B1
Firmware: dir825-firmware.bin (v3.0-r32170 std)
Kernel: Linux 3.10.105 #32454 Thu Jun 1 02:57:33 CEST 2017 mips
Status: Working
Reset: No
Notes on configuration:
Router: TPLINK TL-WDR3600 v1.5
Firmware: DD-WRT v3.0-r31899 std (04/24/17)
Kernel: Linux 3.10.105 #31458 Mon Apr 24 02:06:36 CEST 2017 mips
Status: operational
Reset: No (kept settings, standard reboot after update)
Errors: Nothing that I notice.
-- NOW --
Router: TPLINK TL-WDR3600 v1.5
Firmware: DD-WRT v3.0-r32170 std (06/01/17)
Kernel: Linux 3.10.105 #32456 Thu Jun 1 03:06:02 CEST 2017 mips
Status: operational
Reset: No (kept settings, standard reboot after update)
Errors: Nothing that I notice.
Joined: 05 Oct 2016 Posts: 19 Location: Bremen, Germany
Posted: Sat Jul 01, 2017 0:15 Post subject:
Router: TP-Link TL-WDR4900 V1.3
Firmware: DD-WRT v3.0-r32170 std (06/01/17)
Kernel: Linux 4.4.70 #312 Thu Jun 1 09:47:02 CEST 2017ppc
Status: Good / LAN-Port#4 still broken
Reset: No
Errors: can't use LAN-Port#4
So far, so good.
Hope, this annoying bug gets fixed any time soon...
No feedback on the ticket...
http://svn.dd-wrt.com/ticket/5793
Router: TPLINK Archer C7 v2
Firmware: DD-WRT v3.0-r32170 (06/01/17)
Status: OK
Reset: 3x
Errors:
- Dropouts on 5 GHz when under High WiFi load (transferring large files). Changing the bands has no effect.
Router: TP-LINK TL-WDR4300 v1
Firmware: v3.0-r32170 (06/01/17)
Kernel: Linux 3.10.105 #32456 Thu Jun 1 03:06:02 CEST 2017 mips
Status: OK
Reset: Yes, restored to factory defaults via web interface.
Errors:
- 5 GHz network enabled, but status LED not working.
Router: Buffalo WZR-HP-AG300H
Firmware: v3.0-r32170 std (06/01/17)
Kernel: Linux 3.10.105 #32440 Thu Jun 1 02:22:21 CEST 2017 mips
Status: OK
Reset: No
Errors:
Router appears to reset every 24 hours. And will completely crash and reset under high load. This often occurs when downloading multiple files and FaceTiming from within my LAN -> WAN.
Is it possible to downgrade my router to an older firmware? I'm finding it difficult getting a definitive answer? _________________ Buffalo WZR-HP-AG300H: DD-WRT v3.0-r32170 std (06/01/17)
Router: D-Link DIR-825 revb
Firmware: DD-WRT v3.0-r32170 std (06/01/17)
Kernel: Linux 3.10.105 #32454 Thu Jun 1 02:57:33 CEST 2017 mips
Status: OK
Reset: No
Upgrade from r29739. Two identical routers, AP and CB.
Router: Linksys E2000
Firmware: v3.0-r32170 mini (06/01/17)
Kernel: Linux 2.6.24.111 #31388 Thu Jun 1 01:56:32 CEST 2017 mips
Status: OK
Reset: No
Errors: Virtual Interfaces doesn't work. _________________ All we wanna do is eat your brains.
Netgear WNDR3700v3
Linksys e2000
