[CloneVince]

Kong's DD-WRT build 31085M - 01/04/2017 has been released: http://desipro.de/ddwrt/K3-AC-Arm/

Your reports for Broadcom units are greatly appreciated !
Router:
Firmware:
Kernel:
Status:
Reset:
Errors:

This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build (e.g. 29440_NEWD-2_K2.6_mega-nv64k.bin). Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. Please also do not respond to such questions. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless. If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build.

[jakie]

Thanks for the great work!
Just flashed this on a newly purchased ac3200, so far so good.

One minor bug though, the either port mapping is wrong on this device:

"physical" -> "mapped"
w -> 1
1 -> w
2 -> 4
3 -> 3
4 -> 2

[ragefury32]

Router: Buffalo WZR-1750DHP
Firmware: v3.0-r31085M
Kernel: Linux 4.4.39 SMP armv7l
Status: Not working
Reset: NO
updated via web interface
Services used: cifs, smbd, snmpd, sshd, https, openvpn server

Looks like dnsmasq broke on this build - I was not able to get it to resolve anything for me:

; <<>> DiG 9.10.3-P4-Debian <<>> google.com @192.168.1.1
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: REFUSED, id: 44639
;; flags: qr rd ra ad; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0

;; QUESTION SECTION:
;google.com. IN A

;; Query time: 1 msec
;; SERVER: 192.168.1.1#53(192.168.1.1)
;; WHEN: Wed Jan 04 17:11:57 EST 2017
;; MSG SIZE rcvd: 28

Keep in mind that since there is no realtime clock and if DNS does not resolve for the router, the time will be set at Jan 1, 1970, which breaks your OpenVPN certs.
AFAIK this version is probably a no-go.

Had to roll it back to 31060M (forgot to save a copy of 31070) where everything works again.

[<Kong>]

[labo]

Just bought a new router ASUS RT-AC5300, as no other new 5300 AC routers are supported by dd-wrt now. Working for a day now nand ew update using ddup is failing with error:
Didn't want to to update via webui, risk bricking it:



ddup --flash-latest
New release 31085 for Asus RT-AC5300 available.
Do you want to update (y/n) [default=n]:
y
Connecting to www.desipro.de (212.227.247.157:80)
fw.bin 100% |*************************************************************************************************| 857 0:00:00 ETA
Connecting to www.desipro.de (212.227.247.157:80)
fw.bin.sig 100% |*************************************************************************************************| 861 0:00:00 ETA
Error: Signature does not match. Aborting flash.

[r4nd0m]

I didnt yet upgrade as I did my setup yesterday on DD-WRT v3.0-r31060M kongac (01/03/17) and so far couldnt find any faults ...

@Kong would it be possible to post a changelog to validate if certain issues exist/have been resolved and to see what sort of changes were introduced to see if applicable and what to look out for in detail? I cant seem to find a changelog on your ftp either so I do wonder if this could be changed ... not sure if this is too much of an ask but it would surely be helpful from my perspective ...

cheers for the good work Kong its much appreciated
r4n

[<Kong>]

[labo]

Thanks, Kong. New update went through successfully now.
But I see an issue with dnsmasq option:
I have set cache-size which is not taking effect, shows always 1500 instead of 10000 set in dnsmasq option:

cache-size=10000
I can confirm the syslog report the update:
Jan 4 18:00:00 asusrt5k3 daemon.notice dnscrypt-proxy[1645]: Proxying from 127.0.0.1:30 to 208.67.220.220:443
Jan 4 18:00:00 asusrt5k3 daemon.info dnsmasq[1655]: started, version 2.77 cachesize 10000

However, process doesn't show this update:

1655 1 root S 3120 0.6 0 0.0 dnsmasq -u root -g root --conf-file=/tmp/dnsmasq.conf --cache-size=1500
1656 1655 root S 3096 0.6 0 0.0 dnsmasq -u root -g root --conf-file=/tmp/dnsmasq.conf --cache-size=1500

[<Kong>]

[e3000usr]

Router: Asus RT-AC56U
Firmware: DD-WRT v3.0-r31085M kongac (01/04/17)
Kernel: Linux 4.4.39 #194 SMP Wed Jan 4 23:39:50 CET 2017 armv7l
Status: OK
Reset: NO
Errors: NO

Thanks Kong! It took a few minutes for the time to populate on the status page after a reboot but working fine without having to disable dnscrypt.

[ragefury32]

Router: Buffalo WZR-1750DHP
Firmware: v3.0-r31085M (dd-wrt.v24-K3_AC_ARM_STD)
Kernel: Linux 4.4.39 #194 SMP Wed Jan 4 23:39:50 CET 2017 armv7l
Status: Seems okay
Reset: NO
updated via web interface
Services used and tested: cifs, smbd, snmpd, sshd, https, openvpn server

Yep, looks like dnsmasq is working just fine again - had some minor issues with jffs2 that required me to clean out the partition (the router went through an upgrade from 21015M to 29300M earlier this week), but once it was cleared the issues went away.

OpenVPN server is once again v2.4.0, so make those config directive changes ASAP.

SNMPd does not start up right after up-flash, but twiddle settings via the GUI and everything works just fine again.

[jasonring]

Upgraded to this firmware and found out that opkg lighttpd deamon failed to run. This has cause rutorrent stop working.

[r4nd0m]

Router: Netgear Nighthawk X6 R8000
Firmware: DD-WRT v3.0-r31085M kongac (01/04/17)
Kernel: Linux 4.4.39 #194 SMP Wed Jan 4 23:39:50 CET 2017 armv7l
Status: OK
Reset: NO
Errors: NO

thanks Kong

[mac913]

Router: 2x R7000
Firmware: 31050 -> 31085
Kernel: Linux 4.4.39 #194 SMP Wed Jan 4 23:39:50 CET 2017 armv7l
Status: Both Working
Reset: Erase NVRAM & Manual Configure
Errors: None so far

#1 R7000 (WAN)
- Dual OpenVPN Clients via Script
- Custom Route Tables
- DNSCrpyt via GUI
- NTP with static IP
- DDNS
- 7 BRs/VLANS
- WiFi Disabled
- SSH (WAN Access)
- WAN Traffic Disabled
- USB Storage
- YaMON 3.1

#2 R7000 (WiFi)
- 2.4Ghz Radio with 4 SSIDs (BW 20Mhz)
- 5Ghz Radio with 2 SSIDs (BW 80Mhz)
- WAN Disabled routed via BR
- SPI Firewall Disabled
- OpenVPN Client via GUI
- DNSSEC via DNSMasq Script
- NTP with Static IP
- 7 BRs/VLANS
- SSH (local only)
- WAN Traffic Disabled

1 Hours uptime, all working fine so far. Thanks Kong and B.S. for your hard work!

Update... over 5 Hours uptime - No Issue

[CloneVince]

Thx Kong for the new build, i was experimenting the DNS bug and with this build, no more problem

@ragefury32 : all previous versions are available here : http://ddwrt-kong.clonevince.fr/