[cdmarshall]

Let me add that with this build as well as the last one. I have to reboot my 68u after 3 or 4 days as the wireless gets flaky and does random packet failures. Odd that it shows no errors but it does drop packets moving through the router. I only use it as a AP so its WIFI-LAN moving through the router. I will let you know if I can come up with any reason for it

[hurleyp]

Router: Netgear R7000
Firmware: v3.0-r30645M kongac (09/18/16
Kernel: Linux 4.4.21 #120 SMP Sun Sep 18 22:54:40 CEST 2016 armv7
Status: Up and running for just over 24 hours
Reset: Soft boot before and after ddup
Errors: None

Upgraded via ddup --flash-latest from kong's v30600. I have not performed 'erase nvram' for a couple of months, but everything seems good. Temperatures are good as well: CPU 61.4 °C / WL0 46.8 °C / WL1 49.8 °C

Current basic R7000 setup (subject to change of course):
- Static IP
- DHCP Enabled
- No VLANS
- Wireless: Regulatory Domain = UNITED_STATES, wl0 G-Only, wl1 NA-Mixed, AES
- SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: remote to Logentries
- USB Flashdrive mounted as JFFS, adblocking via pixelserv
- NO: SNMP, ttraf, VNC, Zabbix, VPN, Radius
- NO: Port forwarding, UPnP, DMZ, QoS
- NO: Samba, CIFS, miniDLNA, Entware, Optware

[James Greystone]

R7000 Netgear

Came home today, and no internet access. Rebooted modem first still no internet.

Rebooted router and internet is working. Up time was only 2 days.

Setup is vanilla, only running Open VPN.

I went back to last version for now.

Just an FYI.

[Night Prowler]

[kallsop]

[Night Prowler]

[stalonge]

@Kong

I do know that you are doing a fantastic job in DD-wrt .. but i am a litle bit sad about my routers , althought some others guys told that their routers run fine , mine dont ...

R7000 crash in all K4 builds .. I need a router that is reliable and steady because i run a webserver on it .. This is working 29300 K3 build flawless It works at my office ..

I have other R7000 unit just for fun ( test ) .. it is running always your last build .. It still crashing ..


R8500 , This is my home router ..

Last builds have a serious issue with 2.4 wifi , my wife and my kids complain about it , ( netflix users ) . They say sometimes .. " There is no wifi " ... I teach them to plug router off and on ... I have 4 ip cams to surveillance using this wifi ,...Last night , i downgrade to 29300 .. i know that i wont have problems with this build ..


Just to help community i made many changes here in order to find out whats wrong with my settings .. I change the HD format .. i close some router's jobs .. ftp / samba / dlna / jffs / webserver / openvpn .. but i cant find the right bug .. ..


I am ready to install and test new builds according with next changes ...


I am sure that soon , BS and Kong will release a flawless build for this router ..


Hugs

[limerick_fr]

Ok Kong, I have a special problem with (at least) the last 2 builds.

I have 2 smartphones, one old Samsung Note 3 Neo and one new Samsung A9 Pro which should take place of the first one.

On both smartphone I have an application called Dropsync very useful to synchronize my Dropbox to my phone.
It has always been working fine since I use your builds on my R8000, more than one year ago.

With the last 2 builds, synchronisation can last more than few seconds or minutes and fail due to "Network Error". But everything else works fine (on smartphones and computers). I don't feel or see any network problem.

I would have suspected a problem with the application if I would not have just spent 4 days in a hotel where both smartphones were syncronising smoothly. Even several hours for the new A9 Pro for which it was the first synchronization because it couldn't work at home before I leave (build 30600).

And now I come back with 30645 installed and synchronisation fails again on both phones due to this "Network Error".

The problem if you whish to fix this issue is that you may request some logs or tests or whatever else and I am unable to perform anything apart installing a new build from the Web GUI of DD-WRT... Yes I am a real noob

But if a geek has the same problem, he may gives you the right info you need...

Thanks anyway,

Lim.

[rawd]

I've been experiencing a bug with the last few builds and I've just realized what is happening.

Whenever I lose connection to my OpenVPN client server and it reconnects, its dropping internet connection to ALL clients not just the few IP's that are being routed to it. The actual WIFI connection to the router doesnt drop... i just lose all connections to the internet on all devices for a minute.

This is syslog below of the reconnect that just occured .


Sep 22 13:45:32 DD-WRT daemon.notice openvpn[2092]: [us337.nordvpn.com] Inactivity timeout (--ping-restart), restarting
Sep 22 13:45:32 DD-WRT daemon.notice openvpn[2092]: SIGUSR1[soft,ping-restart] received, process restarting
Sep 22 13:45:32 DD-WRT daemon.notice openvpn[2092]: Restart pause, 2 second(s)
Sep 22 13:45:34 DD-WRT daemon.warn openvpn[2092]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Sep 22 13:45:34 DD-WRT daemon.notice openvpn[2092]: Socket Buffers: R=[180224->180224] S=[180224->180224]
Sep 22 13:45:39 DD-WRT daemon.err openvpn[2092]: RESOLVE: Cannot resolve host address: us337.nordvpn.com: Try again
Sep 22 13:45:39 DD-WRT daemon.notice openvpn[2092]: UDPv4 link local: [undef]
Sep 22 13:45:39 DD-WRT daemon.notice openvpn[2092]: UDPv4 link remote: [AF_INET]104.245.105.18:1194
Sep 22 13:45:39 DD-WRT daemon.notice openvpn[2092]: TLS: Initial packet from [AF_INET]104.245.105.18:1194, sid=4ae2cfb9 2f1387fd
Sep 22 13:45:40 DD-WRT daemon.notice openvpn[2092]: VERIFY OK: depth=1, C=PA, ST=PA, L=Panama, O=NordVPN, OU=NordVPN, CN=us337.nordvpn.com, name=NordVPN, emailAddress=cert@nordvpn.com
Sep 22 13:45:40 DD-WRT daemon.notice openvpn[2092]: Validating certificate key usage
Sep 22 13:45:40 DD-WRT daemon.notice openvpn[2092]: NOTE: --mute triggered...
Sep 22 13:45:41 DD-WRT daemon.notice openvpn[2092]: 11 variation(s) on previous 3 message(s) suppressed by --mute
Sep 22 13:45:41 DD-WRT daemon.notice openvpn[2092]: [us337.nordvpn.com] Peer Connection Initiated with [AF_INET]104.245.105.18:1194
Sep 22 13:45:43 DD-WRT daemon.notice openvpn[2092]: PUSH: Received control message: 'PUSH_REPLY,redirect-gateway def1,dhcp-option DNS 78.46.223.24,dhcp-option DNS 162.242.211.137,route 10.8.8.1,topology net30,ping 5,ping-restart 30,ifconfig 10.8.8.150 10.8.8.149'
Sep 22 13:45:43 DD-WRT daemon.err openvpn[2092]: Options error: option 'redirect-gateway' cannot be used in this context ([PUSH-OPTIONS])
Sep 22 13:45:43 DD-WRT daemon.err openvpn[2092]: Options error: option 'dhcp-option' cannot be used in this context ([PUSH-OPTIONS])
Sep 22 13:45:43 DD-WRT daemon.err openvpn[2092]: Options error: option 'dhcp-option' cannot be used in this context ([PUSH-OPTIONS])
Sep 22 13:45:43 DD-WRT daemon.notice openvpn[2092]: NOTE: --mute triggered...
Sep 22 13:45:43 DD-WRT daemon.notice openvpn[2092]: 1 variation(s) on previous 3 message(s) suppressed by --mute
Sep 22 13:45:43 DD-WRT daemon.notice openvpn[2092]: OPTIONS IMPORT: timers and/or timeouts modified
Sep 22 13:45:43 DD-WRT daemon.notice openvpn[2092]: OPTIONS IMPORT: --ifconfig/up options modified
Sep 22 13:45:43 DD-WRT daemon.notice openvpn[2092]: Preserving previous TUN/TAP instance: tun1
Sep 22 13:45:43 DD-WRT daemon.notice openvpn[2092]: Initialization Sequence Completed

[Ah-Pin-Kor]

Router: D-Link DIR-890L
Firmware: DD-WRT v3.0-r30645M kongac (09/18/16)
Kernel: Linux 4.4.21 #120 SMP Sun Sep 18 22:54:40 CEST 2016 armv7l
Status: No problems noted yet (previous R29440M, updated by Administration ... Firmware Upgrade)
Reset: No
Errors: None noted

Will update this post if any errors encountered.

Up for around 4 days (till it was time to flash next build )

[mac913]

[stalonge]

[Alozaros]

Router Model-Netgear R7000
Firmware Version -DD-WRT v3.0-r30645M kongac (09/18/16)
Kernel Version-Linux 4.4.21 #120 SMP Sun Sep 18 22:54:40 CEST 2016 armv7l

reset: x 2
status: ok
errors: yes few
CPU 60.2 °C / WL0 49.0 °C

Authentication Type - Shared Key is not working only auto..
i have 5 TX errors so i turned off TurboQAM (QAM256) support... im not using: Explicit Beamforming,Implicit Beamforming,Airtime Fairness
aplaying settings via GUI braks my Local DNS settings..
i get this if i select https for GUI access:
encryption algorithm(s). Error code: SSL_ERROR_NO_CYPHER_OVERLAP but im still able to get in its strange couse its not the same with my Atheros unit but i guess its working
also i have some DNS breaks and no internet conn, believe it could be couse modem unit jams i ll inspect more, so far for 12h on unit is operational..

im new to this router it just arrived, also im new to Broadcom units and im not very aware of all the settings available, so far im reading and learning....



by any chance is there anyone who know the best TCP congestion settings for BT infinity im using Huawei HG612 >R7000 so far i use Vegas, but i can see there is a wide choice.....

[<Kong>]

[rawd]