New Kong's build: DD-WRT 30645M - 2016/09/18

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2, 3, 4  Next
Author Message
cdmarshall
DD-WRT User


Joined: 09 Jul 2014
Posts: 308

PostPosted: Wed Sep 21, 2016 16:02    Post subject: Reply with quote
Let me add that with this build as well as the last one. I have to reboot my 68u after 3 or 4 days as the wireless gets flaky and does random packet failures. Odd that it shows no errors but it does drop packets moving through the router. I only use it as a AP so its WIFI-LAN moving through the router. I will let you know if I can come up with any reason for it
_________________
EA-6900
Asus 68U
Sponsor
hurleyp
DD-WRT User


Joined: 10 Sep 2009
Posts: 305
Location: Ottawa, Ontario, Canada

PostPosted: Wed Sep 21, 2016 19:11    Post subject: Reply with quote
Router: Netgear R7000
Firmware: v3.0-r30645M kongac (09/18/16
Kernel: Linux 4.4.21 #120 SMP Sun Sep 18 22:54:40 CEST 2016 armv7
Status: Up and running for just over 24 hours
Reset: Soft boot before and after ddup
Errors: None

Upgraded via ddup --flash-latest from kong's v30600. I have not performed 'erase nvram' for a couple of months, but everything seems good. Temperatures are good as well: CPU 61.4 °C / WL0 46.8 °C / WL1 49.8 °C

Current basic R7000 setup (subject to change of course):
- Static IP
- DHCP Enabled
- No VLANS
- Wireless: Regulatory Domain = UNITED_STATES, wl0 G-Only, wl1 NA-Mixed, AES
- SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: remote to Logentries
- USB Flashdrive mounted as JFFS, adblocking via pixelserv
- NO: SNMP, ttraf, VNC, Zabbix, VPN, Radius
- NO: Port forwarding, UPnP, DMZ, QoS
- NO: Samba, CIFS, miniDLNA, Entware, Optware

_________________
Netgear R7000: v3.0-r45863 std (02/28/21)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 1
James Greystone
DD-WRT User


Joined: 20 Nov 2011
Posts: 156

PostPosted: Wed Sep 21, 2016 23:13    Post subject: Reply with quote
R7000 Netgear

Came home today, and no internet access. Rebooted modem first still no internet.

Rebooted router and internet is working. Up time was only 2 days.

Setup is vanilla, only running Open VPN.

I went back to last version for now.

Just an FYI.
Night Prowler
DD-WRT Novice


Joined: 15 Jan 2016
Posts: 38

PostPosted: Thu Sep 22, 2016 0:09    Post subject: Reply with quote
James Greystone wrote:
R7000 Netgear

Came home today, and no internet access. Rebooted modem first still no internet.

Rebooted router and internet is working. Up time was only 2 days.

Setup is vanilla, only running Open VPN.

I went back to last version for now.

Just an FYI.


If this happens again you might try restarting Open VPN before preforming a router reboot.

_________________
R7000 on DD-WRT v3.0-r32170M kongac (06/11/17)
kallsop
DD-WRT User


Joined: 10 Apr 2008
Posts: 135

PostPosted: Thu Sep 22, 2016 0:59    Post subject: Reply with quote
Night Prowler wrote:
If this happens again you might try restarting Open VPN before preforming a router reboot.


Yeah, I think there is something unreliable with the OpenVPN client is this build. R30600M is working flawless for me.
Night Prowler
DD-WRT Novice


Joined: 15 Jan 2016
Posts: 38

PostPosted: Thu Sep 22, 2016 2:54    Post subject: Reply with quote
kallsop wrote:
Night Prowler wrote:
If this happens again you might try restarting Open VPN before preforming a router reboot.


Yeah, I think there is something unreliable with the OpenVPN client is this build. R30600M is working flawless for me.


I'm on DD-WRT v3.0-r30600M kongac (09/09/16)and have not had that problem yet. I used to think it was my VPN provider, until they had me cycle OpenVPN.

_________________
R7000 on DD-WRT v3.0-r32170M kongac (06/11/17)
stalonge
DD-WRT Guru


Joined: 21 Jul 2006
Posts: 1867
Location: Fortaleza Ce Brazil

PostPosted: Thu Sep 22, 2016 10:12    Post subject: Reply with quote
@Kong

I do know that you are doing a fantastic job in DD-wrt .. but i am a litle bit sad about my routers , althought some others guys told that their routers run fine , mine dont ...

R7000 crash in all K4 builds .. I need a router that is reliable and steady because i run a webserver on it .. This is working 29300 K3 build flawless It works at my office ..

I have other R7000 unit just for fun ( test ) .. it is running always your last build .. It still crashing ..


R8500 , This is my home router ..

Last builds have a serious issue with 2.4 wifi , my wife and my kids complain about it , ( netflix users ) . They say sometimes .. " There is no wifi " ... I teach them to plug router off and on ... I have 4 ip cams to surveillance using this wifi ,...Last night , i downgrade to 29300 .. i know that i wont have problems with this build ..


Just to help community i made many changes here in order to find out whats wrong with my settings .. I change the HD format .. i close some router's jobs .. ftp / samba / dlna / jffs / webserver / openvpn .. but i cant find the right bug .. ..


I am ready to install and test new builds according with next changes ...


I am sure that soon , BS and Kong will release a flawless build for this router ..


Hugs


Very Happy Very Happy

_________________
DDwrt ...it rocks ....

1 R7800 45229 AP Wireguard webserver JFFS SAMBA FTP usb HD Mesh
1 R7800 45229 Cli Mesh
1 WZR1750 45229 AP Webserver OpenVPN Wireguard
1 DDx86 Vmware 40260
1 E3000 41027 K3 @500 WAP wifi client
limerick_fr
DD-WRT User


Joined: 07 Nov 2012
Posts: 111

PostPosted: Thu Sep 22, 2016 13:05    Post subject: Reply with quote
Ok Kong, I have a special problem with (at least) the last 2 builds.

I have 2 smartphones, one old Samsung Note 3 Neo and one new Samsung A9 Pro which should take place of the first one.

On both smartphone I have an application called Dropsync very useful to synchronize my Dropbox to my phone.
It has always been working fine since I use your builds on my R8000, more than one year ago.

With the last 2 builds, synchronisation can last more than few seconds or minutes and fail due to "Network Error". But everything else works fine (on smartphones and computers). I don't feel or see any network problem.

I would have suspected a problem with the application if I would not have just spent 4 days in a hotel where both smartphones were syncronising smoothly. Even several hours for the new A9 Pro for which it was the first synchronization because it couldn't work at home before I leave (build 30600).

And now I come back with 30645 installed and synchronisation fails again on both phones due to this "Network Error".

The problem if you whish to fix this issue is that you may request some logs or tests or whatever else and I am unable to perform anything apart installing a new build from the Web GUI of DD-WRT... Yes I am a real noob Embarassed

But if a geek has the same problem, he may gives you the right info you need...

Thanks anyway,

Lim.
rawd
DD-WRT User


Joined: 06 Jan 2014
Posts: 175

PostPosted: Thu Sep 22, 2016 13:51    Post subject: Reply with quote
I've been experiencing a bug with the last few builds and I've just realized what is happening.

Whenever I lose connection to my OpenVPN client server and it reconnects, its dropping internet connection to ALL clients not just the few IP's that are being routed to it. The actual WIFI connection to the router doesnt drop... i just lose all connections to the internet on all devices for a minute.

This is syslog below of the reconnect that just occured .


Sep 22 13:45:32 DD-WRT daemon.notice openvpn[2092]: [us337.nordvpn.com] Inactivity timeout (--ping-restart), restarting
Sep 22 13:45:32 DD-WRT daemon.notice openvpn[2092]: SIGUSR1[soft,ping-restart] received, process restarting
Sep 22 13:45:32 DD-WRT daemon.notice openvpn[2092]: Restart pause, 2 second(s)
Sep 22 13:45:34 DD-WRT daemon.warn openvpn[2092]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Sep 22 13:45:34 DD-WRT daemon.notice openvpn[2092]: Socket Buffers: R=[180224->180224] S=[180224->180224]
Sep 22 13:45:39 DD-WRT daemon.err openvpn[2092]: RESOLVE: Cannot resolve host address: us337.nordvpn.com: Try again
Sep 22 13:45:39 DD-WRT daemon.notice openvpn[2092]: UDPv4 link local: [undef]
Sep 22 13:45:39 DD-WRT daemon.notice openvpn[2092]: UDPv4 link remote: [AF_INET]104.245.105.18:1194
Sep 22 13:45:39 DD-WRT daemon.notice openvpn[2092]: TLS: Initial packet from [AF_INET]104.245.105.18:1194, sid=4ae2cfb9 2f1387fd
Sep 22 13:45:40 DD-WRT daemon.notice openvpn[2092]: VERIFY OK: depth=1, C=PA, ST=PA, L=Panama, O=NordVPN, OU=NordVPN, CN=us337.nordvpn.com, name=NordVPN, emailAddress=cert@nordvpn.com
Sep 22 13:45:40 DD-WRT daemon.notice openvpn[2092]: Validating certificate key usage
Sep 22 13:45:40 DD-WRT daemon.notice openvpn[2092]: NOTE: --mute triggered...
Sep 22 13:45:41 DD-WRT daemon.notice openvpn[2092]: 11 variation(s) on previous 3 message(s) suppressed by --mute
Sep 22 13:45:41 DD-WRT daemon.notice openvpn[2092]: [us337.nordvpn.com] Peer Connection Initiated with [AF_INET]104.245.105.18:1194
Sep 22 13:45:43 DD-WRT daemon.notice openvpn[2092]: PUSH: Received control message: 'PUSH_REPLY,redirect-gateway def1,dhcp-option DNS 78.46.223.24,dhcp-option DNS 162.242.211.137,route 10.8.8.1,topology net30,ping 5,ping-restart 30,ifconfig 10.8.8.150 10.8.8.149'
Sep 22 13:45:43 DD-WRT daemon.err openvpn[2092]: Options error: option 'redirect-gateway' cannot be used in this context ([PUSH-OPTIONS])
Sep 22 13:45:43 DD-WRT daemon.err openvpn[2092]: Options error: option 'dhcp-option' cannot be used in this context ([PUSH-OPTIONS])
Sep 22 13:45:43 DD-WRT daemon.err openvpn[2092]: Options error: option 'dhcp-option' cannot be used in this context ([PUSH-OPTIONS])
Sep 22 13:45:43 DD-WRT daemon.notice openvpn[2092]: NOTE: --mute triggered...
Sep 22 13:45:43 DD-WRT daemon.notice openvpn[2092]: 1 variation(s) on previous 3 message(s) suppressed by --mute
Sep 22 13:45:43 DD-WRT daemon.notice openvpn[2092]: OPTIONS IMPORT: timers and/or timeouts modified
Sep 22 13:45:43 DD-WRT daemon.notice openvpn[2092]: OPTIONS IMPORT: --ifconfig/up options modified
Sep 22 13:45:43 DD-WRT daemon.notice openvpn[2092]: Preserving previous TUN/TAP instance: tun1
Sep 22 13:45:43 DD-WRT daemon.notice openvpn[2092]: Initialization Sequence Completed
Ah-Pin-Kor
DD-WRT User


Joined: 19 Sep 2015
Posts: 267

PostPosted: Thu Sep 22, 2016 14:18    Post subject: Reply with quote
Router: D-Link DIR-890L
Firmware: DD-WRT v3.0-r30645M kongac (09/18/16)
Kernel: Linux 4.4.21 #120 SMP Sun Sep 18 22:54:40 CEST 2016 armv7l
Status: No problems noted yet (previous R29440M, updated by Administration ... Firmware Upgrade)
Reset: No
Errors: None noted

Will update this post if any errors encountered.

Up for around 4 days (till it was time to flash next build Very Happy )

_________________

Netgear R7800 kongpro 19.07 20190919 || Netgear R7000 36070M kongac (Client Bridge=5GHz, AP=2.4GHz with bridged VAP)
Linksys WRT32X davidc502 OpenWrt || Linksys WRT1200ACv1 Gargoyle 1.11.x
Linksys WRT1900ACSv2 dd-wrt 39956


Last edited by Ah-Pin-Kor on Mon Sep 26, 2016 12:23; edited 1 time in total
mac913
DD-WRT Guru


Joined: 02 May 2008
Posts: 1615
Location: Canada

PostPosted: Thu Sep 22, 2016 15:17    Post subject: Reply with quote
stalonge wrote:
@Kong

I do know that you are doing a fantastic job in DD-wrt .. but i am a litle bit sad about my routers , althought some others guys told that their routers run fine , mine dont ...

R7000 crash in all K4 builds .. I need a router that is reliable and steady because i run a webserver on it .. This is working 29300 K3 build flawless It works at my office ..

I have other R7000 unit just for fun ( test ) .. it is running always your last build .. It still crashing ..


R8500 , This is my home router ..

Last builds have a serious issue with 2.4 wifi , my wife and my kids complain about it , ( netflix users ) . They say sometimes .. " There is no wifi " ... I teach them to plug router off and on ... I have 4 ip cams to surveillance using this wifi ,...Last night , i downgrade to 29300 .. i know that i wont have problems with this build ..


Just to help community i made many changes here in order to find out whats wrong with my settings .. I change the HD format .. i close some router's jobs .. ftp / samba / dlna / jffs / webserver / openvpn .. but i cant find the right bug .. ..


I am ready to install and test new builds according with next changes ...


I am sure that soon , BS and Kong will release a flawless build for this router ..


Hugs


:D :D


Hey stalonge, I'm still on 30600 on for both R7000s with over 11 days uptime. I have an Internet Radio device that also has uptime on over 11 dats too. My Work Laptop must have it's company VPN to do my work and I have never seen it disconnect with build 30600. My setup isn't simple with 8 SSIDs (2 APs & 6 VAPs) and 5 VLANs. I don't use Netflix but I do use Kodi and these devices are hardwired via LAN to TVs.

I don't use the OEM power adapters. I use 12V@5A power adapters connected to UPS or PowerLine Conditioner (not directly to the wall AC plug). When I loaded 30600 I then did the 'erase nvram' and reboot and manually hand entered the configuration to both routers.

_________________
Home Network on Telus PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r45928 Std
R7000 - Wired ISP 4K IPTV Gateway - DDWRT r44483 Std

Off Site 1

R7000 - Gateway & WiFi & WireGuard - DDWRT r44483 Std
WRT610Nv1 - Client Bridge - DDWRT r33679 Mega K2.4

Off Site 2

R7000 - Gateway & WiFi - DDWRT r44483 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531


YAMon 3.4.6 | DNSCrypt-Proxy V2
stalonge
DD-WRT Guru


Joined: 21 Jul 2006
Posts: 1867
Location: Fortaleza Ce Brazil

PostPosted: Thu Sep 22, 2016 15:41    Post subject: Reply with quote
mac913 wrote:
stalonge wrote:
@Kong

I do know that you are doing a fantastic job in DD-wrt .. but i am a litle bit sad about my routers , althought some others guys told that their routers run fine , mine dont ...

R7000 crash in all K4 builds .. I need a router that is reliable and steady because i run a webserver on it .. This is working 29300 K3 build flawless It works at my office ..

I have other R7000 unit just for fun ( test ) .. it is running always your last build .. It still crashing ..


R8500 , This is my home router ..

Last builds have a serious issue with 2.4 wifi , my wife and my kids complain about it , ( netflix users ) . They say sometimes .. " There is no wifi " ... I teach them to plug router off and on ... I have 4 ip cams to surveillance using this wifi ,...Last night , i downgrade to 29300 .. i know that i wont have problems with this build ..


Just to help community i made many changes here in order to find out whats wrong with my settings .. I change the HD format .. i close some router's jobs .. ftp / samba / dlna / jffs / webserver / openvpn .. but i cant find the right bug .. ..


I am ready to install and test new builds according with next changes ...


I am sure that soon , BS and Kong will release a flawless build for this router ..


Hugs


Very Happy Very Happy


Hey stalonge, I'm still on 30600 on for both R7000s with over 11 days uptime. I have an Internet Radio device that also has uptime on over 11 dats too. My Work Laptop must have it's company VPN to do my work and I have never seen it disconnect with build 30600. My setup isn't simple with 8 SSIDs (2 APs & 6 VAPs) and 5 VLANs. I don't use Netflix but I do use Kodi and these devices are hardwired via LAN to TVs.

I don't use the OEM power adapters. I use 12V@5A power adapters connected to UPS or PowerLine Conditioner (not directly to the wall AC plug). When I loaded 30600 I then did the 'erase nvram' and reboot and manually hand entered the configuration to both routers.



unfortunetly , i dont have these results , 90% of my clients are wifi .. around 15 ... bug still there .. I use Kodi too and netflix a lot ..

I already thought that was a hardware problem , but when i run 29300 problems dissapear .. I have done erase nvram many times in all routers .. factory defaults too ... Bug persists ..

I will be waiting for a solution .. I believe it will be soon ..

Hugs



Very Happy Very Happy

_________________
DDwrt ...it rocks ....

1 R7800 45229 AP Wireguard webserver JFFS SAMBA FTP usb HD Mesh
1 R7800 45229 Cli Mesh
1 WZR1750 45229 AP Webserver OpenVPN Wireguard
1 DDx86 Vmware 40260
1 E3000 41027 K3 @500 WAP wifi client
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 4177
Location: UK, London, just across the river..

PostPosted: Thu Sep 22, 2016 15:41    Post subject: Reply with quote
Router Model-Netgear R7000
Firmware Version -DD-WRT v3.0-r30645M kongac (09/18/16)
Kernel Version-Linux 4.4.21 #120 SMP Sun Sep 18 22:54:40 CEST 2016 armv7l

reset: x 2
status: ok
errors: yes few
CPU 60.2 °C / WL0 49.0 °C

Authentication Type - Shared Key is not working only auto..
i have 5 TX errors so i turned off TurboQAM (QAM256) support... im not using: Explicit Beamforming,Implicit Beamforming,Airtime Fairness
aplaying settings via GUI braks my Local DNS settings..
i get this if i select https for GUI access:
encryption algorithm(s). Error code: SSL_ERROR_NO_CYPHER_OVERLAP but im still able to get in its strange couse its not the same with my Atheros unit but i guess its working
also i have some DNS breaks and no internet conn, believe it could be couse modem unit jams i ll inspect more, so far for 12h on unit is operational..

im new to this router it just arrived, also im new to Broadcom units and im not very aware of all the settings available, so far im reading and learning....



by any chance is there anyone who know the best TCP congestion settings for BT infinity im using Huawei HG612 >R7000 so far i use Vegas, but i can see there is a wide choice.....

_________________
Atheros
TP-Link WR740Nv1 -----DD-WRT 45928 BS AP,NAT
TP-Link WR740Nv4 -----DD-WRT 44251 BS WAP/Switch
TP-Link WR1043NDv2 ---DD-WRT 45849 BS AP,NAT,AP Isolation,Firewall,Local DNS,Forced DNS,DoT,VPN,VLAN
TP-Link WR1043NDv2 ---DD-WRT 45928 BS AP,NAT,AD/Block,Firewall,Local DNS,Forced DNS,DoT,VPN,VLAN
TP-Link WR1043NDv2 ---Gargoyle OS 1.12.0 AP,NAT,QoS,Quotas
Qualcomm/IPQ8065
Netgear R7800 -----DD-WRT 45928 BS AP,NAT,AD-Block,AP&Net Isolation,VLAN's,Firewall,Local DNS,DoT
Broadcom
Netgear R7000 -----DD-WRT 45928 BS AP,Wi-Fi OFF,NAT,AD-Block,Firewall,Local DNS,Forced DNS,VLAN's,DoT,VPN
-----------------------------------------------------------------------------------------------
Stubby for DNS over TLS I DNSCrypt v2 by mac913


Last edited by Alozaros on Fri Sep 23, 2016 9:38; edited 2 times in total
<Kong>
DD-WRT Guru


Joined: 15 Dec 2010
Posts: 4339
Location: Germany

PostPosted: Thu Sep 22, 2016 18:25    Post subject: Reply with quote
rawd wrote:
I've been experiencing a bug with the last few builds and I've just realized what is happening.

Whenever I lose connection to my OpenVPN client server and it reconnects, its dropping internet connection to ALL clients not just the few IP's that are being routed to it. The actual WIFI connection to the router doesnt drop... i just lose all connections to the internet on all devices for a minute.

This is syslog below of the reconnect that just occured .


Sep 22 13:45:32 DD-WRT daemon.notice openvpn[2092]: [us337.nordvpn.com] Inactivity timeout (--ping-restart), restarting
Sep 22 13:45:32 DD-WRT daemon.notice openvpn[2092]: SIGUSR1[soft,ping-restart] received, process restarting
Sep 22 13:45:32 DD-WRT daemon.notice openvpn[2092]: Restart pause, 2 second(s)
Sep 22 13:45:34 DD-WRT daemon.warn openvpn[2092]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Sep 22 13:45:34 DD-WRT daemon.notice openvpn[2092]: Socket Buffers: R=[180224->180224] S=[180224->180224]
Sep 22 13:45:39 DD-WRT daemon.err openvpn[2092]: RESOLVE: Cannot resolve host address: us337.nordvpn.com: Try again
Sep 22 13:45:39 DD-WRT daemon.notice openvpn[2092]: UDPv4 link local: [undef]
Sep 22 13:45:39 DD-WRT daemon.notice openvpn[2092]: UDPv4 link remote: [AF_INET]104.245.105.18:1194
Sep 22 13:45:39 DD-WRT daemon.notice openvpn[2092]: TLS: Initial packet from [AF_INET]104.245.105.18:1194, sid=4ae2cfb9 2f1387fd
Sep 22 13:45:40 DD-WRT daemon.notice openvpn[2092]: VERIFY OK: depth=1, C=PA, ST=PA, L=Panama, O=NordVPN, OU=NordVPN, CN=us337.nordvpn.com, name=NordVPN, emailAddress=cert@nordvpn.com
Sep 22 13:45:40 DD-WRT daemon.notice openvpn[2092]: Validating certificate key usage
Sep 22 13:45:40 DD-WRT daemon.notice openvpn[2092]: NOTE: --mute triggered...
Sep 22 13:45:41 DD-WRT daemon.notice openvpn[2092]: 11 variation(s) on previous 3 message(s) suppressed by --mute
Sep 22 13:45:41 DD-WRT daemon.notice openvpn[2092]: [us337.nordvpn.com] Peer Connection Initiated with [AF_INET]104.245.105.18:1194
Sep 22 13:45:43 DD-WRT daemon.notice openvpn[2092]: PUSH: Received control message: 'PUSH_REPLY,redirect-gateway def1,dhcp-option DNS 78.46.223.24,dhcp-option DNS 162.242.211.137,route 10.8.8.1,topology net30,ping 5,ping-restart 30,ifconfig 10.8.8.150 10.8.8.149'
Sep 22 13:45:43 DD-WRT daemon.err openvpn[2092]: Options error: option 'redirect-gateway' cannot be used in this context ([PUSH-OPTIONS])
Sep 22 13:45:43 DD-WRT daemon.err openvpn[2092]: Options error: option 'dhcp-option' cannot be used in this context ([PUSH-OPTIONS])
Sep 22 13:45:43 DD-WRT daemon.err openvpn[2092]: Options error: option 'dhcp-option' cannot be used in this context ([PUSH-OPTIONS])
Sep 22 13:45:43 DD-WRT daemon.notice openvpn[2092]: NOTE: --mute triggered...
Sep 22 13:45:43 DD-WRT daemon.notice openvpn[2092]: 1 variation(s) on previous 3 message(s) suppressed by --mute
Sep 22 13:45:43 DD-WRT daemon.notice openvpn[2092]: OPTIONS IMPORT: timers and/or timeouts modified
Sep 22 13:45:43 DD-WRT daemon.notice openvpn[2092]: OPTIONS IMPORT: --ifconfig/up options modified
Sep 22 13:45:43 DD-WRT daemon.notice openvpn[2092]: Preserving previous TUN/TAP instance: tun1
Sep 22 13:45:43 DD-WRT daemon.notice openvpn[2092]: Initialization Sequence Completed


Your config is incorrect.

_________________
KONG PB's: http://www.desipro.de/ddwrt/
KONG Info: http://tips.desipro.de/
rawd
DD-WRT User


Joined: 06 Jan 2014
Posts: 175

PostPosted: Thu Sep 22, 2016 19:24    Post subject: Reply with quote
<Kong> wrote:
rawd wrote:
I've been experiencing a bug with the last few builds and I've just realized what is happening.

Whenever I lose connection to my OpenVPN client server and it reconnects, its dropping internet connection to ALL clients not just the few IP's that are being routed to it. The actual WIFI connection to the router doesnt drop... i just lose all connections to the internet on all devices for a minute.

This is syslog below of the reconnect that just occured .


Sep 22 13:45:32 DD-WRT daemon.notice openvpn[2092]: [us337.nordvpn.com] Inactivity timeout (--ping-restart), restarting
Sep 22 13:45:32 DD-WRT daemon.notice openvpn[2092]: SIGUSR1[soft,ping-restart] received, process restarting
Sep 22 13:45:32 DD-WRT daemon.notice openvpn[2092]: Restart pause, 2 second(s)
Sep 22 13:45:34 DD-WRT daemon.warn openvpn[2092]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Sep 22 13:45:34 DD-WRT daemon.notice openvpn[2092]: Socket Buffers: R=[180224->180224] S=[180224->180224]
Sep 22 13:45:39 DD-WRT daemon.err openvpn[2092]: RESOLVE: Cannot resolve host address: us337.nordvpn.com: Try again
Sep 22 13:45:39 DD-WRT daemon.notice openvpn[2092]: UDPv4 link local: [undef]
Sep 22 13:45:39 DD-WRT daemon.notice openvpn[2092]: UDPv4 link remote: [AF_INET]104.245.105.18:1194
Sep 22 13:45:39 DD-WRT daemon.notice openvpn[2092]: TLS: Initial packet from [AF_INET]104.245.105.18:1194, sid=4ae2cfb9 2f1387fd
Sep 22 13:45:40 DD-WRT daemon.notice openvpn[2092]: VERIFY OK: depth=1, C=PA, ST=PA, L=Panama, O=NordVPN, OU=NordVPN, CN=us337.nordvpn.com, name=NordVPN, emailAddress=cert@nordvpn.com
Sep 22 13:45:40 DD-WRT daemon.notice openvpn[2092]: Validating certificate key usage
Sep 22 13:45:40 DD-WRT daemon.notice openvpn[2092]: NOTE: --mute triggered...
Sep 22 13:45:41 DD-WRT daemon.notice openvpn[2092]: 11 variation(s) on previous 3 message(s) suppressed by --mute
Sep 22 13:45:41 DD-WRT daemon.notice openvpn[2092]: [us337.nordvpn.com] Peer Connection Initiated with [AF_INET]104.245.105.18:1194
Sep 22 13:45:43 DD-WRT daemon.notice openvpn[2092]: PUSH: Received control message: 'PUSH_REPLY,redirect-gateway def1,dhcp-option DNS 78.46.223.24,dhcp-option DNS 162.242.211.137,route 10.8.8.1,topology net30,ping 5,ping-restart 30,ifconfig 10.8.8.150 10.8.8.149'
Sep 22 13:45:43 DD-WRT daemon.err openvpn[2092]: Options error: option 'redirect-gateway' cannot be used in this context ([PUSH-OPTIONS])
Sep 22 13:45:43 DD-WRT daemon.err openvpn[2092]: Options error: option 'dhcp-option' cannot be used in this context ([PUSH-OPTIONS])
Sep 22 13:45:43 DD-WRT daemon.err openvpn[2092]: Options error: option 'dhcp-option' cannot be used in this context ([PUSH-OPTIONS])
Sep 22 13:45:43 DD-WRT daemon.notice openvpn[2092]: NOTE: --mute triggered...
Sep 22 13:45:43 DD-WRT daemon.notice openvpn[2092]: 1 variation(s) on previous 3 message(s) suppressed by --mute
Sep 22 13:45:43 DD-WRT daemon.notice openvpn[2092]: OPTIONS IMPORT: timers and/or timeouts modified
Sep 22 13:45:43 DD-WRT daemon.notice openvpn[2092]: OPTIONS IMPORT: --ifconfig/up options modified
Sep 22 13:45:43 DD-WRT daemon.notice openvpn[2092]: Preserving previous TUN/TAP instance: tun1
Sep 22 13:45:43 DD-WRT daemon.notice openvpn[2092]: Initialization Sequence Completed


Your config is incorrect.


Kong I dont see how?

ip ru results are only the devices I wish to route through to vpn.

Additional config is,

keepalive 10 120
resolv-retry infinite
remote-cert-tls server
remote-random
nobind
tun-mtu-extra 32
mssfix 1450
persist-key
persist-tun
verb 3
fast-io
route-nopull

When I check on a computer that is on the LAN that is not in the policy route list, it displays correctly as not being re-routed.

I will try to debug thanks for the direction.
Goto page Previous  1, 2, 3, 4  Next Display posts from previous:    Page 2 of 4
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum