Is my Linksys dead?

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Author Message
umby75
DD-WRT Novice


Joined: 17 Jan 2015
Posts: 10

PostPosted: Tue Sep 13, 2016 20:03    Post subject: Is my Linksys dead? Reply with quote
Hi, I've tried to load a ddwrt firmware on my Linksys wrt54g ver 6.0.
I followed this guide:
http://www.dd-wrt.com/wiki/index.php/Linksys_WRT54G_v5.0_%26_5.1_%26_6.0
but probably something was wrong.
I followed all steps but when I tried the Tft software the attempts weren't enough to erase and to flash the firmware.
Accidentally I unplugged the charger and then I reinserted the charger and the router gave me the Remote Management but I don't know why I tried to unplugged one more time the charger and re-inserted it and now I can't reach the router's ip.
Now the power lamp blinks and if I try to hit a 30-30-30 Hard reset I have always the same outcome.
What do you suggest me?
Sponsor
Per Yngve Berg
DD-WRT Guru


Joined: 13 Aug 2013
Posts: 6856
Location: Romerike, Norway

PostPosted: Wed Sep 14, 2016 8:09    Post subject: Reply with quote
Set your computer to s a static ip 192.168.1.5 and try to access 192.168.1.1
Murrkf
DD-WRT Guru


Joined: 22 Sep 2008
Posts: 12675

PostPosted: Wed Sep 14, 2016 14:05    Post subject: Reply with quote
Then see the peacock announcement, note 6.
_________________
SIG:
I'm trying to teach you to fish, not give you a fish. If you just want a fish, wait for a fisherman who hands them out. I'm more of a fishing instructor.
LOM: "If you show that you have not bothered to read the forum announcements or to follow the advices in them then the level of help available for you will drop substantially, also known as Murrkf's law.."
umby75
DD-WRT Novice


Joined: 17 Jan 2015
Posts: 10

PostPosted: Wed Sep 14, 2016 17:49    Post subject: Reply with quote
Per Yngve Berg wrote:
Set your computer to s a static ip 192.168.1.5 and try to access 192.168.1.1


Hi, thank you for reply, my friend.
Today I can reach the Remote Management to 192.168.1.1.
I don't now why but yesterday i was unable to reach the page. I tried much times...
umby75
DD-WRT Novice


Joined: 17 Jan 2015
Posts: 10

PostPosted: Thu Sep 15, 2016 23:59    Post subject: Reply with quote
Murrkf wrote:
Then see the peacock announcement, note 6.


Since I can reach the Remote Management page how can I do to flash the ddwrt firmware?
From which point of guide do I need to follow to get the ddwrt flashing?
umby75
DD-WRT Novice


Joined: 17 Jan 2015
Posts: 10

PostPosted: Fri Sep 16, 2016 10:47    Post subject: Reply with quote
umby75 wrote:
Murrkf wrote:
Then see the peacock announcement, note 6.


Since I can reach the Remote Management page how can I do to flash the ddwrt firmware?
From which point of guide do I need to follow to get the ddwrt flashing?



edit:
From this point where I can access at Management page I've followed the guide from point 4 in Problem and Workaround to an inaccessible Linksys Wrt54g v6.0 router.
At point 6 and 7 I don't get "Upgrade Success" message.
Unlike of point 8 I can still get back to Management Mode.
Anyway I keep on to follow the steps but the power led didn'tstop blinking, etc. as has written in step 12.
Any suggestion?
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 6268
Location: Texas

PostPosted: Fri Sep 16, 2016 11:23    Post subject: Reply with quote
At http://www.dd-wrt.com/wiki/index.php/Linksys_WRT54G_v5.0_%26_5.1_%26_6.0
toward bottom -- read Interesting but non-sense notes:
Also, be patient doing all steps...

Find a point where you are and what pings you get and do accorddingly.

CLEAR browser cache and restart before attempting to access router via http.

other old old http://www.wrtrouters.com/guides/upgradetolinux/
(don't leave a v23 firmware on your router / if installed then upgrade to v24)
umby75
DD-WRT Novice


Joined: 17 Jan 2015
Posts: 10

PostPosted: Mon Sep 19, 2016 10:14    Post subject: Reply with quote
mrjcd wrote:
At http://www.dd-wrt.com/wiki/index.php/Linksys_WRT54G_v5.0_%26_5.1_%26_6.0
toward bottom -- read Interesting but non-sense notes:
Also, be patient doing all steps...

Find a point where you are and what pings you get and do accorddingly.

CLEAR browser cache and restart before attempting to access router via http.

other old old http://www.wrtrouters.com/guides/upgradetolinux/
(don't leave a v23 firmware on your router / if installed then upgrade to v24)


Thanks my friend.
I followed the section of guide you suggested me and at 2 point, where you read you need to upload vxworks_prep_03.bin and My54gImage.bin files I can't get Upgrade success message. My router is stuck on Management page.
I tried to use the Tftp for 'dd-wrt.v24-12548_NEWD_micro' flashing but I can't get success (how long do I need to wait it?).
After the power cycle I come back into Management mode.
I don't understand about booting in tftp or without tftp as has written there.
How can I fix it?
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum