Posted: Tue Feb 02, 2016 9:27 Post subject: Re: dd-wrt On a WR941ND V6
GreyDoc wrote:
what do you mean by that?
I mean, is there a way I can help with experimenting on my router to help other people let there work.
I have Linux experience and networking too, but I never hacked firmware's, if there is someone that can somehow give me firmware's to test or tell we what to do , I would be glad to help.
are you familiar with TFTP and serial recovery procedures? if you want I can try to change a header of an existing build of another model, but you may easily brick your v6 device with such a build
are you familiar with TFTP and serial recovery procedures? if you want I can try to change a header of an existing build of another model, but you may easily brick your v6 device with such a build
I fear not hahah
Just tell me what to do, if it works, everyone is happy, if not, well... not big loss here.
Wifi seems fine, but none of the ethernet interfaces (WAN or LAN) appear to be functional. The issues appear identical to a similar set of problems for the TL-WA901ND v4 this thread - not surpising as they share a CPU and the firmware they are trying is a header-modified version of the one I've tried.
There is an OpenWRT patch to add Ethernet support to the Qualcomm SOC on which the TP9343 CPU is derived; I'm wondering if there's anything from that which could be leveraged to get this device working.
There is also a stripped firmware (no bootloader) here that can be used to revert to stock, if flashed via the Telnet or SSH interface. I haven't tried it yet.
I'm happy to feed back information from the device I've got, if anyone needs to narrow down the issue.
With my WR-941ND V6. i was flashed factory-to-ddwrt 29739 build but no Lan & Wan, only wifi. I was flash tl-wr941ndv6-webflash.bin via wifi, now i can using lan & wan, but lan led not working, wan led is blink orange even attach cable on lan 1.
I modified the header of the DD-WRT 29739 factory-to-ddwrt build intended for TL-WR941NDv6 / WR940Nv3, so it will flash on the
US version of TL-WR941NDv6 / WR940Nv3 running stock TP-Link firmware.
If the attached build works for you, it can be further updated with any newer-than-29739 webflash build for WR941NDv6/WR940Nv3.
Disclaimer: I haven't tested the attached build myself, so I'm not responsible in any way if you brick your router.
Please only flash this build if you know how to unbrick it.
Note: You must be logged in to be able to download the attachment. _________________ THERE ARE NO STRANGERS HERE; ONLY FRIENDS YOU HAVEN'T YET MET.
________________________________________________________________________________________________________
DD-WRT CHANGELOG | DEVICES | DD-WRT BUILDS | KONG BUILDS | UNOFFICIAL BUILDS | DD-WRT in VIRTUALBOX
Posted: Tue Jul 05, 2016 3:11 Post subject: Factory Revert
I flashed my router successfully but the functionality is extremely limited and I want to revert back to the TP firmware but everytime I flash the factory firmware and stripped version it does not take. Any suggestions would be appreciated. My current version of dd wrt is r30082.
I flashed my router successfully but the functionality is extremely limited and I want to revert back to the TP firmware but everytime I flash the factory firmware and stripped version it does not take. Any suggestions would be appreciated. My current version of dd wrt is r30082.
Well for me i need to wait utils the lan and wan cable start to work. i try hard to make i work but no one of the recent build work on my tp link wr941 v6. Wifi work #1 but lan and wan light are off and don't connect at all . i also try to put my wan in static mode .. still no cable connection on it . Some idea for fix it ? thanks