Author
Message
KrypteX DD-WRT Guru Joined: 18 Jan 2014 Posts: 2411
Back to top
Sponsor
demoralized DD-WRT User Joined: 13 Apr 2013 Posts: 61
Posted: Mon Jun 27, 2016 11:54 Post subject:
Yo kryptex.
Any news when will you have some precious free time to update the changelog?
Best regards.
Back to top
Alozaros DD-WRT Guru Joined: 16 Nov 2015 Posts: 6437 Location: UK, London, just across the river..
Posted: Mon Jun 27, 2016 11:56 Post subject:
demoralized wrote: Yo kryptex.
Any news when will you have some precious free time to update the changelog?
Best regards.
+1 _________________Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Back to top
cybero2912 DD-WRT Guru Joined: 18 Jun 2006 Posts: 1190 Location: Berlin
Posted: Mon Jun 27, 2016 14:39 Post subject:
broken webif on AR2317 devices (tested on DIR-300 and Fonera)
Router Model: DIR-300 /Fonera
Firmware Version DD-WRT v3.0-r30016 std (06/24/16)
Reset: YES
Errors: Webinterface not working
Status: NOT OK
output on console when trying to open webif:
Code:
cannot load /lib/do_pagehead_vis
cannot load /lib/nvg_visual.so
cannot load /lib/nvg_visual.so
cannot load /lib/nvg_visual.so
cannot load /lib/wl_packet_get_visual.so
cannot load /lib/dumpmeminfo_visual.so
cannot load /lib/ifndef_visual.so
cannot load /lib/ifndef_visual.so
cannot load /lib/active_wireless_visual.so
cannot load /lib/active_wds_visual.so
cannot load /lib/ifndef_visual.so
cannot load /lib/ifndef_visual.so
cannot load /lib/dumpleases_visual.so
cannot load /lib/nvg_visual.so
cannot load /lib/nvg_visual.so
cannot load /lib/showad_visual.so
cannot load /lib/show_control_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/ifndef_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/ifndef_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/insertpageToken_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/nvg_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/nvg_visual.so
cannot load /lib/nvg_visual.so
cannot load /lib/nvg_visual.so
cannot load /lib/nvg_visual.so
cannot load /lib/nvg_visual.so
cannot load /lib/ifndef_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/show_wl_mac_visual.so
cannot load /lib/show_wl_mac_visual.so
cannot load /lib/ifndef_visual.so
cannot load /lib/nvram_status_get_visual.so
cannot load /lib/nvg_visual.so
cannot load /lib/ifndef_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/show_wifiselect_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/get_radio_state_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/getwirelessmode_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/getwirelessnetmode_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/getwirelessssid_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/get_curchannel_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/get_txpower_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/get_currate_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/ifndef_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/get_service_state_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/nvm_visual.so
cannot load /lib/nvm_visual.so
cannot load /lib/nvim_visual.so
cannot load /lib/nvm_visual.so
cannot load /lib/nvm_visual.so
cannot load /lib/nvim_visual.so
cannot load /lib/ifndef_visual.so
cannot load /lib/nvm_visual.so
cannot load /lib/nvm_visual.so
cannot load /lib/nvm_visual.so
cannot load /lib/nvm_visual.so
cannot load /lib/ifndef_visual.so
cannot load /lib/ifndef_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/nvm_visual.so
cannot load /lib/nvm_visual.so
cannot load /lib/ifndef_visual.so
cannot load /lib/ifndef_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/nvm_visual.so
cannot load /lib/nvm_visual.so
cannot load /lib/ifndef_visual.so
cannot load /lib/ifndef_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/nvm_visual.so
cannot load /lib/nvm_visual.so
cannot load /lib/ifndef_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/statnv_visual.so
cannot load /lib/ifndef_visual.so
cannot load /lib/statfs_visual.so
cannot load /lib/nvg_visual.so
cannot load /lib/ifndef_visual.so
cannot load /lib/ifndef_visual.so
cannot load /lib/statfs_visual.so
cannot load /lib/nvg_visual.so
cannot load /lib/ifndef_visual.so
cannot load /lib/ifndef_visual.so
cannot load /lib/statfs_visual.so
cannot load /lib/nvg_visual.so
cannot load /lib/ifndef_visual.so
cannot load /lib/ifndef_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/gps_status_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/nvg_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/nvg_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/getlongitude_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/getlatidude_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/nvg_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/nvg_visual.so
cannot load /lib/getgpslink_visual.so
cannot load /lib/ifndef_visual.so
cannot load /lib/ifndef_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/getwirelessstatus_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/ifndef_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/nvem_visual.so
cannot load /lib/nvem_visual.so
cannot load /lib/show_paypal_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/get_firmware_version_visual.so
cannot load /lib/tran_visual.so
cannot load /lib/get_uptime_visual.so
cannot load /lib/show_wanipinfo_visual.so
back to v3.0-r29974 = all OK
Back to top
Frakko DD-WRT Guru Joined: 06 May 2016 Posts: 521
Posted: Tue Jun 28, 2016 6:15 Post subject:
[quote="Knomax"]Router Model & version: TPLINK WR1043ND V3 DD-WRT v3.0-r30016 (06/24/16)
Reset: X2
Errors: 0
Status:OK
Still have bad bufferbloat at upstream...nothing change even if i choose HTB,HFSC..SFQ..FQ_CODEL!!![/quote]
How to install this firmware on 1043 v3?
Do you show me the link and guide?
Back to top
jwoods DD-WRT User Joined: 13 Mar 2016 Posts: 403
Posted: Tue Jun 28, 2016 6:24 Post subject:
Frakko wrote: Still have bad bufferbloat at upstream...nothing change even if i choose HTB,HFSC..SFQ..FQ_CODEL!!!
Start with 95% of your total allowed maximum uplink/downlink speeds, and work down from there.
Use WAN, HTB, and FQ_CODEL to start.
Check the boxes for ACK, SYN, FIN, and RST.
Disable any other priorites.
Test at www.dslreports.com/speedtest
Get a good baseline, backup your config, add in any priorities you had previously one at a time, re-test.
Back to top
tatsuya46 DD-WRT Guru Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Tue Jun 28, 2016 6:28 Post subject:
jwoods wrote: Frakko wrote: Still have bad bufferbloat at upstream...nothing change even if i choose HTB,HFSC..SFQ..FQ_CODEL!!!
Start with 95% of your total allowed maximum uplink/downlink speeds, and work down from there.
Use WAN, HTB, and FQ_CODEL to start.
Check the boxes for ACK, SYN, FIN, and RST.
Disable any other priorites.
Test at www.dslreports.com/speedtest
Get a good baseline, backup your config, add in any priorities you had previously one at a time, re-test.
there is still a problem with qos in our ddwrt, http://svn.dd-wrt.com/ticket/5225 but under certain conditions as ive found in that ticket _________________LATEST FIRMWARE(S)
BrainSlayer wrote: we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r55797 std
[QUALCOMM] DIR-862L --------------------------------> r55797 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r50485 std
[BROADCOM] DIR-860L A1 ----------------------------> r50485 std
Sigh.. why do i exist anyway.. | I love you Anthony.. never forget that.. my other 99% that ill never see again..
Back to top
jwoods DD-WRT User Joined: 13 Mar 2016 Posts: 403
Back to top
tatsuya46 DD-WRT Guru Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Tue Jun 28, 2016 6:53 Post subject:
what is ur provider's provided uplink speed? do u have any services entered for services priority? (yes i did see ur link)
i too, get an "A", but if using global settings, & no uplink settings below 1Mbps. _________________LATEST FIRMWARE(S)
BrainSlayer wrote: we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r55797 std
[QUALCOMM] DIR-862L --------------------------------> r55797 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r50485 std
[BROADCOM] DIR-860L A1 ----------------------------> r50485 std
Sigh.. why do i exist anyway.. | I love you Anthony.. never forget that.. my other 99% that ill never see again..
Back to top
jwoods DD-WRT User Joined: 13 Mar 2016 Posts: 403
Posted: Tue Jun 28, 2016 6:58 Post subject:
tatsuya46 wrote: what is ur provider's provided uplink speed? do u have any services entered for services priority?
6 down and 1 up.
No priorities enabled except TCP-Packets.
Back to top
tatsuya46 DD-WRT Guru Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Tue Jun 28, 2016 7:01 Post subject:
jwoods wrote: tatsuya46 wrote: what is ur provider's provided uplink speed? do u have any services entered for services priority?
6 down and 1 up.
No priorities enabled except TCP-Packets.
cable or (v)dsl? would u be willing to set a custom rate of something much lower like 4096 kbps down, & 256 kbps up (maintain NO services priorities entered, tcp-packets are okay). then do a speedtest, while uploading, & do a pingtest to a nearby server such as google, youtube, etc. u should have heavy packet loss &/or latency while on the uplink test, but not on the download test. this is with all, codel, fq_codel, sfq, & all combos with htb/hfsc. _________________LATEST FIRMWARE(S)
BrainSlayer wrote: we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r55797 std
[QUALCOMM] DIR-862L --------------------------------> r55797 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r50485 std
[BROADCOM] DIR-860L A1 ----------------------------> r50485 std
Sigh.. why do i exist anyway.. | I love you Anthony.. never forget that.. my other 99% that ill never see again..
Back to top
jwoods DD-WRT User Joined: 13 Mar 2016 Posts: 403
Posted: Tue Jun 28, 2016 7:08 Post subject:
tatsuya46 wrote: cable or (v)dsl? would u be willing to set a custom rate of something much lower like 4096 kbps down, & 256 kbps up (maintain NO services priorities entered, tcp-packets are okay). then do a speedtest, while uploading, & do a pingtest to a nearby server such as google, youtube, etc. u should have heavy packet loss &/or latency while on the uplink test, but not on the download test. this is with all, codel, fq_codel, sfq, & all combos with htb/hfsc.
DSL.
When I get some free time in life I can run a WinMRT and show both latency and packet loss.
I noticed that retransmit averages dropped considerably when I started using TCP-Packets (from the 4 to 5% range to 3%).
Back to top
tatsuya46 DD-WRT Guru Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Tue Jun 28, 2016 7:24 Post subject:
jwoods wrote: tatsuya46 wrote: cable or (v)dsl? would u be willing to set a custom rate of something much lower like 4096 kbps down, & 256 kbps up (maintain NO services priorities entered, tcp-packets are okay). then do a speedtest, while uploading, & do a pingtest to a nearby server such as google, youtube, etc. u should have heavy packet loss &/or latency while on the uplink test, but not on the download test. this is with all, codel, fq_codel, sfq, & all combos with htb/hfsc.
DSL.
When I get some free time in life I can run a WinMRT and show both latency and packet loss.
I noticed that retransmit averages dropped considerably when I started using TCP-Packets (from the 4 to 5% range to 3%).
Thanks, if u can, could u please show ur result from both speedtest.net & dslreports's speedtest (using cmd (or linux/mac eq if u use) constant ping to a nearby stable server)? _________________LATEST FIRMWARE(S)
BrainSlayer wrote: we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r55797 std
[QUALCOMM] DIR-862L --------------------------------> r55797 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r50485 std
[BROADCOM] DIR-860L A1 ----------------------------> r50485 std
Sigh.. why do i exist anyway.. | I love you Anthony.. never forget that.. my other 99% that ill never see again..
Back to top
powerking88 DD-WRT Novice Joined: 18 May 2016 Posts: 3
Posted: Tue Jun 28, 2016 7:29 Post subject:
Router Model: TP-Link TL-WR841ND V11
Firmware Version: DD-WRT v3.0-r30016 std (06/24/16)
Kernel Version: Linux 3.18.35 #13640 Fri Jun 24 02:47:33
CEST 2016 mips
Reset: No
Errors: Hotspotsystem function is not working properly
Status: OK
Back to top
jwoods DD-WRT User Joined: 13 Mar 2016 Posts: 403
Posted: Tue Jun 28, 2016 7:33 Post subject:
Two tests.
One without ping on upload...one with.
Back to top