EnGenius ESR600 DD-WRT firmware support

Post new topic   Reply to topic    DD-WRT Forum Index -> Senao Devices
Author Message
Teephart
DD-WRT Novice


Joined: 17 Feb 2016
Posts: 1

PostPosted: Wed Feb 17, 2016 20:59    Post subject: EnGenius ESR600 DD-WRT firmware support Reply with quote
I need the DD-WRT firmware for my EnGenuis ESR600
It has the following hardware

FCC ID: A8JESR600

CPU1: MediaTek MT7620A (580 MHz)
FLA1: 16 MiB (Macronix MX25L12845EMI-10G)
RAM1: 64 MiB (Nanya NT5TU32M16DG-AC)
Expansion IFs: USB 2.0
USB ports: 1

WI1 chip1: MediaTek MT7620A
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL
WI2 chip1: Ralink RT5592
WI2 802dot11 protocols: an
WI2 MIMO config: 2x2:2
WI2 antenna connector: U.FL

ETH chip1: MediaTek MT7620A
Switch: Atheros AR8327
LAN speed: 10/100/1000
LAN ports: 4
WAN ports: 1

abgn
Sponsor
mak_v_
DD-WRT Novice


Joined: 26 Apr 2016
Posts: 1

PostPosted: Tue Apr 26, 2016 10:50    Post subject: Reply with quote
I have the same bricked esr600.
I tryed to flash ".dlf" via serial U-boot. Nothing helps.
After that i found topic about "header.x86" and "dd" and folow instruction to create uImageESR600.
I've decoded original firmware ESR600-V1-4-5-55.dlf with header.x86 and stripped first 192 bytes with dd.
http://www.dd-wrt.com/phpBB2/viewtopic.php?p=761683
Result:
Code:
 binwalk uImageESR600
DECIMAL      HEX          DESCRIPTION
-------------------------------------------------------------------------------------------------------
0            0x0          uImage header, header size: 64 bytes, header CRC: 0xC188B2BE, created: Fri Jul 24 12:34:17 2015, image size: 1873102 bytes, Data Address: 0x80000000, Entry Point: 0x8000C110, data CRC: 0xE2B2814F, OS: Linux, CPU: MIPS, image type: OS Kernel Image, compression type: lzma, image name: "Linux Kernel Image"
64           0x40         LZMA compressed data, properties: 0x5D, dictionary size: 33554432 bytes, uncompressed size: 4817916 bytes
1900544      0x1D0000     Squashfs filesystem, little endian, version 4.0, compression:  size: 13242828 bytes,  812 inodes, blocksize: 131072 bytes, created: Fri Jul 24 12:33:59 2015

I cannot load this image file to the router... it keeps giving me bad magic number errors when I try to boot afterward.
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Senao Devices All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum