Joined: 13 Jun 2006 Posts: 1608 Location: SE Michigan USA
Posted: Fri Apr 01, 2016 20:08 Post subject:
I believe these are for Qualcom chips so it is a do not care for folks using the Linksys WRT1900AC. Keep in mind that the change log is for all the 500 plus routers Brainslayer supports.
Router: WRT1900AC - V1
Firmware: build 29397
Kernel: 3.18.29 (after a uname -r not sure being honest)
Status: Working with errors
Reset: No
Errors: Unable to see the Web GUI and I did a iptables -F just in case, but doesn't work.
"Correction": The ip with port to access doesn't show the web gui, but going to /Management.asp it works, "all good then". _________________ 7 x Broadcom BCM5300 chip rev 1 - Asus RT-AC66U ----> v3.0-r31899 giga (04/24/17)
1 x Marvel Armada 385 - LinkSys WRT1900ACS ---------> v3.0-r31899 std (04/24/17)
1 x Marvel Armada 370/XP - LinkSys WRT1900AC -------> v3.0-r31899 std (04/24/17)
1 x QCA IPQ806X - Linksys EA8500 -------------------> v3.0-r31899 std (04/24/17)
1 x Broadcom BCM4709 - Asus RT-AC3200 --------------> v3.0-r30880 std (11/14/16)
1 x ARMv7 Processor rev 0 (v7l) - Asus RT-AC68U ----> v3.0-r30880 std (11/14/16)
1 x ARMv7 Processor rev 0 (v7l) - Linksys EA6900 ---> v3.0-r30880 std (11/14/16)
1 x ARM Cortex-A9 Processor - Net Gear R7000 -------> v3.0-r30880 std (11/14/16)
5 x Broadcom BCM4716 chip rev 1 - Linksys E4200 ----> v24-sp2 (06/07/14) kingkong
1 x Broadcom BCM5300 chip rev 1 - Asus RT-AC66U ----> v24-sp2 (04/01/13) giga
Joined: 17 Feb 2010 Posts: 611 Location: Yorkshire (GOC)
Posted: Sun Apr 03, 2016 9:10 Post subject:
Well it doesn't work for me! No difference in 5GHz performance which remains capped at around 20Mbps.
This is after a factory reset and a full reconfiguration.
I switched back to stock v1.8.xxx and got 107Mbps on 5GHz. Then I switched to the latest Kong and configured it exactly the same as BS. The Kong build also delivers 107Mbps on 5GHz, so my conclusion is that the BS builds, over the last couple of months, have all been fundamentally broken in some way on 5GHz.
Router: Linksys WRT 1900AC (Marvel Armada 370/XP 2cores @1.2Ghz)
Firmware: DD-WRT v3.0-r29387 std (03/31/16)
Kernel: Linux 3.18.29 #69 SMP Thu Mar 31 03:40:25 CEST 2016 armv7
Status: working with no issues
Reset: No
Errors: None after 24 hours
Temperatures:
CPU 63.1 °C / WL0 48.0 °C / WL1 50.0 °C
Memory:
Total Available - 97% 254620 kB / 262144 kB
Free - 84% 214068 kB / 254620 kB