Author
Message
cnone DD-WRT Novice Joined: 20 Oct 2014 Posts: 12
Posted: Mon Mar 21, 2016 12:58 Post subject:
Hello al,
So far your script is working well, no problems on my TP-Link WR1043ND v2 (DD-WRT 03.17.2016).
Particularly the installation script and it's local files support is awesome.
Thanks for your efforts. And this update deserves another donation on my behalf
Back to top
Sponsor
al_c DD-WRT Guru Joined: 13 Apr 2013 Posts: 2134 Location: Ottawa Canada
Posted: Mon Mar 21, 2016 13:30 Post subject:
cnone wrote: Hello al,
So far your script is working well, no problems on my TP-Link WR1043ND v2 (DD-WRT 03.17.2016).
Particularly the installation script and it's local files support is awesome.
Thanks for your efforts. And this update deserves another donation on my behalf
Thanks for the update (in particular because things are working well for you).
I think the installation script should make things a lot easier for folks who are new to DD-WRT (OpenWrt, etc.)... I should've done it a long time ago
Donations really help to offset costs of hosting usage-monitoring.com, test routers, etc.
Thanks!
Al
Back to top
David Lewis DD-WRT Novice Joined: 12 Mar 2016 Posts: 6
Posted: Tue Mar 22, 2016 8:54 Post subject: Still no traffic data
Hi Al,
I've tried running the 2016-03-19 install.sh, but still there is no traffic data being gathered. Were the log files I sent via PM useful? Is there anything else I can do to help?
Thanks...
Back to top
andyrav DD-WRT Novice Joined: 04 Mar 2014 Posts: 21
Posted: Fri Mar 25, 2016 8:43 Post subject: install hangs
trying on TPLINK Archer C9
running Firmware: DD-WRT v3.0-r28444 std (12/05/15)
but the install hangs
any ideas?
Downloading the latest version of:
* /opt/YAMon3/includes/defaults.sh
* /opt/YAMon3/includes/getLocalCopies.sh
* /opt/YAMon3/includes/hourly2monthly.sh
* /opt/YAMon3/includes/util.sh
* /opt/YAMon3/readme.txt
* /opt/YAMon3/yamon3.0.11.sh
* /opt/YAMon3/default config.file
Back to top
stonewalljones DD-WRT Novice Joined: 26 Mar 2016 Posts: 4
Posted: Sat Mar 26, 2016 14:32 Post subject: No data
I am having the same problem as rippernz and others.
I ran all of the comands that you had asked people to show and put them here in this pastebin: http://pastebin.com/c7xiKRVW
I just installed YAMon3 with the latest "install (2016-03-19).zip" and I have UPnP disabled.
In the web interface it gives the error attached.
Is there anything else I can give you to help solve the problem?
Description:
Filesize:
70.26 KB
Viewed:
6929 Time(s)
Back to top
al_c DD-WRT Guru Joined: 13 Apr 2013 Posts: 2134 Location: Ottawa Canada
Posted: Sat Mar 26, 2016 19:37 Post subject: Re: No data
stonewalljones wrote: I am having the same problem as rippernz and others.
I ran all of the comands that you had asked people to show and put them here in this pastebin: http://pastebin.com/c7xiKRVW
I just installed YAMon3 with the latest "install (2016-03-19).zip" and I have UPnP disabled.
In the web interface it gives the error attached.
Is there anything else I can give you to help solve the problem?
Thanks, your pastebin dump show that iptables is returning entries with traffic
Can you run:
`iptables -L YAMONv4 -vnx`
and then
`iptables -L YAMONv4 -vnx | grep '^\s\{1,\}[1-9]'`
In particular, the second one should give just the rows that do not start with a zero... does it?
Thx
Back to top
stonewalljones DD-WRT Novice Joined: 26 Mar 2016 Posts: 4
Posted: Sat Mar 26, 2016 19:56 Post subject: Re: No data
al_c wrote: stonewalljones wrote: I am having the same problem as rippernz and others.
I ran all of the comands that you had asked people to show and put them here in this pastebin: http://pastebin.com/c7xiKRVW
I just installed YAMon3 with the latest "install (2016-03-19).zip" and I have UPnP disabled.
In the web interface it gives the error attached.
Is there anything else I can give you to help solve the problem?
Thanks, your pastebin dump show that iptables is returning entries with traffic
Can you run:
`iptables -L YAMONv4 -vnx`
and then
`iptables -L YAMONv4 -vnx | grep '^\s\{1,\}[1-9]'`
In particular, the second one should give just the rows that do not start with a zero... does it?
Thx
No it does not. And I do have traffic going across my network right now.
Back to top
al_c DD-WRT Guru Joined: 13 Apr 2013 Posts: 2134 Location: Ottawa Canada
Posted: Sat Mar 26, 2016 21:25 Post subject: Re: No data
stonewalljones wrote: al_c wrote: stonewalljones wrote: I am having the same problem as rippernz and others.
I ran all of the comands that you had asked people to show and put them here in this pastebin: http://pastebin.com/c7xiKRVW
I just installed YAMon3 with the latest "install (2016-03-19).zip" and I have UPnP disabled.
In the web interface it gives the error attached.
Is there anything else I can give you to help solve the problem?
Thanks, your pastebin dump show that iptables is returning entries with traffic
Can you run:
`iptables -L YAMONv4 -vnx`
and then
`iptables -L YAMONv4 -vnx | grep '^\s\{1,\}[1-9]'`
In particular, the second one should give just the rows that do not start with a zero... does it?
Thx
No it does not. And I do have traffic going across my network right now.
what about
`iptables -L YAMONv4 -vnx | egrep '^\s{1,}[1-9]'`
Back to top
stonewalljones DD-WRT Novice Joined: 26 Mar 2016 Posts: 4
Posted: Sat Mar 26, 2016 21:59 Post subject: Re: No data
al_c wrote: stonewalljones wrote: al_c wrote: stonewalljones wrote: I am having the same problem as rippernz and others.
I ran all of the comands that you had asked people to show and put them here in this pastebin: http://pastebin.com/c7xiKRVW
I just installed YAMon3 with the latest "install (2016-03-19).zip" and I have UPnP disabled.
In the web interface it gives the error attached.
Is there anything else I can give you to help solve the problem?
Thanks, your pastebin dump show that iptables is returning entries with traffic
Can you run:
`iptables -L YAMONv4 -vnx`
and then
`iptables -L YAMONv4 -vnx | grep '^\s\{1,\}[1-9]'`
In particular, the second one should give just the rows that do not start with a zero... does it?
Thx
No it does not. And I do have traffic going across my network right now.
what about
`iptables -L YAMONv4 -vnx | egrep '^\s{1,}[1-9]'`
Still nothing.
Back to top
ddaniel51 DD-WRT Guru Joined: 19 Feb 2013 Posts: 1464
Posted: Sun Mar 27, 2016 0:19 Post subject:
Al, what services prevent Y from seeing wan traffic?
_________________ Segment 1 XR700 10Gb LAN, 1Gb WAN ISP BS
Wired AP 1 Unifi Wifi 6 LR US 1Gb LAN
Wired AP 2 Unifi Wifi 6 LR US 1Gb LAN
Wired AP 3 Unifi Wifi 6 LR US 1Gb LAN
Syslog Services Asustor 7110T NAS 10GB
NetGear XS716T 10GB Switch
download1.dd-wrt.com/dd-wrtv2/downloads/betas/ (Brain Slayer)
YAMon https://usage-monitoring.com/index.php
Back to top
cohassetsteve DD-WRT Novice Joined: 05 Mar 2009 Posts: 33
Posted: Sun Mar 27, 2016 1:26 Post subject:
root@DD-WRT:~# iptables -L YAMONv4 -vnx | egrep '^\s{1,}[1-9]'
root@DD-WRT:~#
Back to top
cohassetsteve DD-WRT Novice Joined: 05 Mar 2009 Posts: 33
Posted: Sun Mar 27, 2016 1:39 Post subject:
I don't know if this helps or not
Description:
Filesize:
108.19 KB
Viewed:
6826 Time(s)
Back to top
cohassetsteve DD-WRT Novice Joined: 05 Mar 2009 Posts: 33
Posted: Sun Mar 27, 2016 1:42 Post subject:
Sorry for the giant picture, I forgot to resize it
Back to top
al_c DD-WRT Guru Joined: 13 Apr 2013 Posts: 2134 Location: Ottawa Canada
Posted: Sun Mar 27, 2016 2:19 Post subject:
cohassetsteve wrote: root@DD-WRT:~# iptables -L YAMONv4 -vnx | egrep '^\s{1,}[1-9]'
root@DD-WRT:~#
what do you if you remove the caret (^) - e.g.,
iptables -L YAMONv4 -vnx | grep '\s\{1,\}[1-9]
(In theory it should be similar, if not identical to what you get from
iptables -L YAMONv4 -vnx
Al
Back to top
al_c DD-WRT Guru Joined: 13 Apr 2013 Posts: 2134 Location: Ottawa Canada
Posted: Sun Mar 27, 2016 2:35 Post subject:
ddaniel51 wrote: Al, what services prevent Y from seeing wan traffic?
Dave - I think the only way to filter wan traffic is through more sophisticated rules in iptables... but I don't know what those should be... yet.
Al
Back to top