Posted: Mon Mar 14, 2016 22:11 Post subject: Problems with QoS
Running Kongs Firmware: DD-WRT v3.0-r29020M kongmv (02/04/16) on WRT1900ACS
Been kinda testing everything for the past month and everything seems to work as it should, with one exception.
This is the second time I noticed QoS stopped working as it should after around 2-3 day uptime.
Set downlink speed is ignored completely. While set uplink speed is still respected.
To fix it I have to either reboot the router or change and apply QoS settings again.
These are my settings:
Anyone noticed anything similar?
I should also add that I'm using very basic features. The only non default feature beside QoS I'm using is UPnP.
I guess if it happens again 1st course of action is lowering limits according to the wiki.
Quote:
If the performance is acceptable you can start to inch your levels up. If you go even 2% higher than you should be, your QoS will totally stop working (just too high) or randomly stop working (when your ISP node/DSLAM is slow aka saturated). This can lead to a lot of confusion on your part so get it working first by conservatively setting these speeds and then optimize later.
