Cfe collection project -See Pg 9 for FTP server info

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2, 3 ... , 21, 22, 23  Next
Author Message
pepsimusic
DD-WRT Novice


Joined: 22 Sep 2013
Posts: 1

PostPosted: Sun Sep 22, 2013 10:24    Post subject: need cfe for comtrend ct-5361 Reply with quote
Board ID: 96348GW-11
System-On-Chip: BCM6348

I need a working cfe for uploading via jtag for comtrend ct5361
Sponsor
unimatrix725
DD-WRT Novice


Joined: 25 May 2012
Posts: 5

PostPosted: Fri Oct 18, 2013 18:28    Post subject: Buffalo WZR-HP-G300NH2 -Version 2- Atheros Based Reply with quote
This is my CFE (10-18-2013)in case someone else needs it or even myself at a future date. This is Atheros Based, I found no posts or links to a Atheros CFE, but here it is just in case. This is the Version 2 of the router noted by the last part NH2. It is *different* from a NH (version 1) so dont use it unless you have the NH (version 2). If you are unsure look on the bottom/back of router the sticker will give you the correct info. There was allot of debate when it was first released. I can still say to this day Buffalo cannot get their heads out of their ass! The support they provide is next to worthless. I could not download an updated version of their "Pro" firmware, because the site said my serial was not valid. Tech support even swore I had a version 1 of the unit. I said screw it, I wanted a dd-wrt compatible router and this was it. I gave up on even trying their "Pro" and settled for brainslayers builds. He has never let me down before. Ripped by http://192.168.0.1/cfe.bin and hitting enter, place your ip if different mine was 3.1. I am using DD-WRT v24-sp2 (07/24/13) std (SVN revision 22118). Which I obtained from here:
ftp://dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/2013/
Some Info here:
http://wikidevi.com/wiki/Buffalo_WZR-HP-G300NH2



cfe.bin
 Description:
Non-Compressed bin

Download
 Filename:  cfe.bin
 Filesize:  320 KB
 Downloaded:  1232 Time(s)


cfe.bin.tar.gz
 Description:
buffalo wzr-g300nh2

Download
 Filename:  cfe.bin.tar.gz
 Filesize:  94.56 KB
 Downloaded:  1133 Time(s)

digit99
DD-WRT Novice


Joined: 30 Sep 2013
Posts: 4

PostPosted: Mon Oct 28, 2013 6:52    Post subject: Have anyone cfe from rdaa-81? Reply with quote
Need cfe from rdaa-81 with atheros cpu
filter4ever
DD-WRT Novice


Joined: 18 Oct 2014
Posts: 2

PostPosted: Wed Oct 22, 2014 22:16    Post subject: Reply with quote
I have a Buffalo WZR-HP-G300NH that I bricked by typing "mtd erase flash", and quickly did a "mtd write flash" of the original firmware. Now the router won't do anything (no serial console, just "power" led. I have a blackcat JTAG, and it shows up as "no CFI detected".

I heard from somebody that you had to bring the 'flash enable chip' to logic HIGH (VCC 3.3v) in order to access the flash. Does anyone know which chip this is?

There's the following chips I believe it could be.

Flash: Spansion S29GL256P

U18 - Quad-NAND gate 74HC00

U13 - Quad-multiplexer (directly above the serial header) 74HCT-157

U14 - uP7707U8-00 (no data, seems like a power regulator but not sure).

I attached the Spansion S29GL256P data sheet, but there's several 'ENABLE' pins on it. However, it looks like a write cycle involves a complex set of enabling/disabling #CE, #WE, and #OE.

Another thing I can try is to edit the script for the commands of the BlackCat to do a 'Read' 'Device ID' (22h), but I need WE high.

I've got a CFE and everything I need ready, several JTAG devices, a serial TTL interface, and an audrino. If anyone has any ideas, let me know.



S29GL-P_00.pdf
 Description:

Download
 Filename:  S29GL-P_00.pdf
 Filesize:  2.63 MB
 Downloaded:  1220 Time(s)

andylee
DD-WRT Novice


Joined: 05 Dec 2014
Posts: 1

PostPosted: Fri Dec 05, 2014 22:37    Post subject: Reply with quote
Can anybody post a copy cfe.bin of Netgear R6200 v1 ? I need a OEM cfe. Thanks.
Y4n6
DD-WRT Novice


Joined: 26 Jan 2016
Posts: 1

PostPosted: Tue Jan 26, 2016 6:36    Post subject: Reply with quote
I need cfe.bin for Belkin belkin f5d7230 4 v8,anyone can help?thanks
datoneer
DD-WRT Novice


Joined: 03 Apr 2013
Posts: 5

PostPosted: Wed Mar 09, 2016 0:18    Post subject: Reply with quote
I need a cfe.bin for Tp-Link Archer C7 v2, fcc id:TE7C7V2. MAC:14CC2056F5CE Please if someone can add it, uploading via jtag tumpa. Thanks
LOM
DD-WRT Guru


Joined: 28 Dec 2008
Posts: 7647

PostPosted: Thu Mar 10, 2016 3:54    Post subject: Reply with quote
datoneer wrote:
I need a cfe.bin for Tp-Link Archer C7 v2


No you don't.
C7v2 has u-boot bootloader, not CFE and tumpa can anyway not jtag those Atheros cpu's.

_________________
Kernel panic: Aiee, killing interrupt handler!
datoneer
DD-WRT Novice


Joined: 03 Apr 2013
Posts: 5

PostPosted: Thu Mar 10, 2016 13:21    Post subject: Reply with quote
Thanks, then please read this post http://www.dd-wrt.com/phpBB2/viewtopic.php?t=291102 and suggest what should i do.
gomme600
DD-WRT Novice


Joined: 12 Mar 2016
Posts: 1

PostPosted: Sat Mar 12, 2016 23:25    Post subject: BT home hub 2A Reply with quote
Hello. I have bricked my bt home hub 2A, the only CFE I could find was the one on the openwrt wiki and I can't get it to work. Can anyone upload the original here please? Or maybe even the wholeflash.bin if possible as it is acting very strange... Thanks!
ddwrt_derek
DD-WRT Novice


Joined: 25 Nov 2016
Posts: 1

PostPosted: Fri Nov 25, 2016 4:07    Post subject: WRT54GLv1.1 DD-WRT method cfe backup Reply with quote
Hello,
I'm not sure if you are still looking for CFE backups but here is another one. This one may be a bit different though.

I have looked at a few other CFE binaries for the same model router and there are some unusual differences. I purchased my router on ebay and I have noticed the NVRAM settings being changed or hacked before. I did not suspect that perhaps the CFE could also be hacked but I have had a few instances where the firmware was wiped and recently it was almost bricked. It would not accept TFTP updates until I was just about to perform a pin short and then the ping started working after I opened the case.

One of the odd things I have noticed is how the other CFE binaries have their build dates set as CST time. In this one it is "Build Date: Mon Oct 26 16:57:52 HKT 2009 (crazy@sw1)"
Another odd note is how the crazy@sw1 is usually set to root@localhost in most other CFE I have inspected.

Please let me know what you make of this CFE. Does it appear normal or possibly hacked? I was thinking of changing out the CFE to handle k26 builds anyway.

Regards,
Derek



cfe_WRT54GL_v1.1_DDWRTbackup.bin
 Description:
WRT54GLv1.1 DD-WRT method cfe backup

Download
 Filename:  cfe_WRT54GL_v1.1_DDWRTbackup.bin
 Filesize:  256 KB
 Downloaded:  845 Time(s)

nikkadimka
DD-WRT Novice


Joined: 21 Aug 2019
Posts: 7

PostPosted: Fri Aug 23, 2019 2:20    Post subject: Reply with quote
Linksys EA9300


cferam.105.bin
 Description:
CFE version: v1.1.1
Build Date: Tue May 23 17:24:59 CST 2017

Download
 Filename:  cferam.105.bin
 Filesize:  339.13 KB
 Downloaded:  541 Time(s)

yeek
DD-WRT Novice


Joined: 22 Jan 2015
Posts: 10

PostPosted: Fri Aug 23, 2019 19:29    Post subject: Looking for a cfe.bin backup of D-LINK DIR-895L Reply with quote
Looking for a cfe.bin backup of D-LINK DIR-895L.

Thanks in advance
CaptainJackson
DD-WRT Novice


Joined: 01 Oct 2019
Posts: 1

PostPosted: Tue Oct 01, 2019 23:24    Post subject: Linksys WRT610N V1 CFE Reply with quote
Couldn't find a cfe anywhere for my Linksys WRT610N v1. So after I finally got mine back up and running, I made a back up of the CFE. I got it using the web interface: http://192.168.1.1/backup/cfe.bin


FCCID QT87-WRT610NV1

bootnv_ver=7
pmon_ver=CFE 4.175.64.16

File Size 256kb



610N-v1-pmon_ver=CFE 4.175.64.16-cfe.bin
 Description:

Download
 Filename:  610N-v1-pmon_ver=CFE 4.175.64.16-cfe.bin
 Filesize:  256 KB
 Downloaded:  470 Time(s)

pquesinb
DD-WRT Novice


Joined: 11 Jan 2019
Posts: 3

PostPosted: Wed Jun 21, 2023 17:52    Post subject: CFE for Asus RT-AC5300 Reply with quote
Is there a cfe in the database for this router? Would you like one?

I've tried to access the barryware FTP site and other links to no avail, so I can't even tell if that cfe is needed. I had previously found a link to a collection of cfes (somewhere) but didn't see the RT-AC5300 listed so I suspect that a working CFE might be useful.

One thing though, while I appear to have backed up the cfe successfully, I can't seem to find the MAC address in the file, searching with hexedit (Linux). I was planning on changing it before uploading but now I'm concerned that I might not have the entire file or that something else could be wrong.

The file is 524288 bytes in length.
Goto page Previous  1, 2, 3 ... , 21, 22, 23  Next Display posts from previous:    Page 22 of 23
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum