Hello,
my wrt54 is now finally broken and I would like to use as RT-N66U now as my main router.
The original firmware is very unstable, must restart the router every few days new
Now I've tested tomato, runs very good and stable, but i read there is no development.
Question now
is DD-WRT for the Asus RT-N66U further developed in the future?
So, if there is a development i think is better to use DD-WRT as such tomato, or?
One of the commands would return an error message.
Of course it would knock out the wireless, it reboots the router and erases your settings.
Yes, but wired didn't work either, so I had no way of changing the settings to make wireless work again.
I have the same problem with the 27240 build.
I willing to help for the testing if it can help solve this problem.
I've similar issue with my RT-N66U B1. I tried many different version dd-wrt firmware and everytime I have same problem, no access through LAN, only via WLAN. When I make erase nvram via telnet, then WLAN don't get up, so I lost access to router.
The original firmware is very unstable, must restart the router every few days new
Now I've tested tomato, runs very good and stable, but i read there is no development.
Question now
is DD-WRT for the Asus RT-N66U further developed in the future?
There is also Merlin's AsusWRT, based on the original f/w. If you're having instability w/ the OEM f/w, you should update the CFE, per Per Yngve Berg. Actually, you have to install AsusWRT to do the CFE update. _________________ #NAT/SFE/CTF: limited speed w/ DD#Repeater issues#DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo#
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
First go back to Asus firmware. Then put dd-wrt on it.
Since you do have the old cfe, you can only use the 3k.X builds. _________________ I am far from a guru, I'm barely a novice.
Right, that's why I said to only use the k3.x builds. As to which build to use, there are threads lately for every build released. Look in the forum and see if anyone has used the one you are asking about.
Or just try it. _________________ I am far from a guru, I'm barely a novice.