Search found 454 matches

Goto page 1, 2, 3 ... 29, 30, 31  Next
Goto page 1, 2, 3 ... 29, 30, 31  Next
Author Message
  Topic: Asus RT-N66U
MrAlvin

Replies: 2530
Views: 2578768

PostForum: Broadcom SoC based Hardware   Posted: Thu Oct 10, 2019 5:39   Subject: CFE 1.0.1.9 on RT-N66U
I just updated the CFE on my old, old RT-N66U router.

I updated from version 1.0.1.2 to version 1.0.1.9, following the instructions in this post:
https://www.snbforums.com/threads/cfe-bootloader ...
  Topic: WRT150n - Question about internal voltage TPs
MrAlvin

Replies: 4
Views: 1451

PostForum: Broadcom SoC based Hardware   Posted: Tue Oct 31, 2017 13:08   Subject: WRT150n - Question about internal voltage TPs
Are you using the stock firmware?

Or are you using a (different) DD-WRT firmware?

If the power LED is connected directly to one of the power sources, then perhaps the LED (or resistor) is bad ...
  Topic: ASUS RT N12 D1 - DD-wrt install confusion
MrAlvin

Replies: 5
Views: 8071

PostForum: Broadcom SoC based Hardware   Posted: Tue Oct 31, 2017 13:02   Subject: ASUS RT N12 D1 - DD-wrt install confusion
The ASUS recover utility is basically a fancy-dress TFTP utility.

Does the two descriptions differ in that they use the ASUS utility or a TFTP solution?

Did you notice these guides:
https:// ...
  Topic: Belkin F7D4302 Firmware Update impossible
MrAlvin

Replies: 3
Views: 2061

PostForum: Broadcom SoC based Hardware   Posted: Tue Oct 31, 2017 12:49   Subject: Belkin F7D4302 Firmware Update impossible
I don't know anything about Belkin routers, but it seems that this post, is the official guide to upgrade firmware to your router.
http://www.dd-wrt.com/phpBB2/viewtopic.php?p=492842#492842
  Topic: Client Bridge and AP with External Router/DHCP Server
MrAlvin

Replies: 2
Views: 2287

PostForum: Atheros WiSOC based Hardware   Posted: Tue Oct 31, 2017 12:43   Subject: Client Bridge and AP with External Router/DHCP Server
Perhaps try to connect the AP device in a different way to the modem router.

- Leave WAN port and firewall in their default state on the AP device.
- Disable DCHP server on the AP
- use wires be ...
  Topic: Create subnet on LAN, to isolate my computers
MrAlvin

Replies: 4
Views: 3007

PostForum: Advanced Networking   Posted: Sat Oct 11, 2014 17:34   Subject: Create subnet on LAN, to isolate my computers
Smile
  Topic: Create subnet on LAN, to isolate my computers
MrAlvin

Replies: 4
Views: 3007

PostForum: Advanced Networking   Posted: Wed Oct 08, 2014 7:20   Subject: Create subnet on LAN, to isolate my computers
Set you router to a different network number, like 192.168.y.x
where your y needs to be different from you landlord.
So for example 192.168.10.254

Your network segment will now be 192.168.10

...
  Topic: Help me set up a repeater in my truck!
MrAlvin

Replies: 2
Views: 3159

PostForum: General Questions   Posted: Wed Oct 08, 2014 7:03   Subject: Help me set up a repeater in my truck!
did you look at this guide?

http://www.dd-wrt.com/wiki/index.php/Repeater_Bridge
  Topic: Want to access NAS over internet - need help with settings
MrAlvin

Replies: 6
Views: 12559

PostForum: General Questions   Posted: Mon Oct 06, 2014 13:57   Subject: Re: Want to access NAS over internet - need help with settin
but I can access my USB drive over my local network, so I believe it's fine. what tool (program) are you using?

Different programs tend to use different ports. Like:
- web - port 80
- ftp - ports ...
  Topic: Parallel port to USB, is it possible?
MrAlvin

Replies: 2
Views: 2575

PostForum: General Questions   Posted: Thu Sep 25, 2014 19:35   Subject: Parallel port to USB, is it possible?
Due to USB timing issues, it is extremely unlikely that the shown adapter will work.

For de-bricking, using USB, you need one of two:
- http://www.techinfodepot.info/wiki/TIAO_-_USB_Multi-Protoco ...
  Topic: Using 2 wi-fi routers on the same network
MrAlvin

Replies: 5
Views: 7184

PostForum: Advanced Networking   Posted: Thu Sep 25, 2014 7:47   Subject: Using 2 wi-fi routers on the same network
Actually it is your choice.

- if you use a cable between the two routers, then http://www.dd-wrt.com/wiki/index.php/Wireless_Access_Point is the way to go.

- if you do not want to use a cable be ...
  Topic: Routing/DHCP issue
MrAlvin

Replies: 8
Views: 4544

PostForum: General Questions   Posted: Thu Sep 25, 2014 7:38   Subject: Routing/DHCP issue
Thats the thing. The WAN port on my D-Link is already plugged into a LAN port on my Comcast router
Which is why you:

- Connect a LAN port (from your D-Link box) to a LAN port on your Comcast rou ...
  Topic: Bridge two networks together using routers with diff ISPs
MrAlvin

Replies: 3
Views: 3664

PostForum: General Questions   Posted: Tue Sep 23, 2014 3:36   Subject: Bridge two networks together using routers with diff ISPs
A really simple (but somewhat manual approach) is to:

- turn off the DHCP server on one of the routers

- give each router an IP number on the same network segment, ie. in house A make it 192.168 ...
  Topic: OTRW2 & FTPSERVER || who will take over
MrAlvin

Replies: 8
Views: 7315

PostForum: Broadcom SoC based Hardware   Posted: Tue Sep 16, 2014 2:02   Subject: OTRW2 & FTPSERVER || who will take over
I have not been doing much DD-WRT stuff lately, but I am still hosting a few DD-WRT related files on my (external at one.com) web server. The server has a few Gb HD space free and (as far as I know) h ...
  Topic: Routing/DHCP issue
MrAlvin

Replies: 8
Views: 4544

PostForum: General Questions   Posted: Mon Sep 15, 2014 5:45   Subject: Routing/DHCP issue
The REALLY simple solution:

- Disable DHCP server on your D-Link box
- Connect a LAN port (from your D-Link box) to a LAN port on your comcast router

You are done! Shocked


The not as si ...
All times are GMT
Navigation
Jump to: